HYRIG can supply the FESTO ADN-25-25-A-P-A compact cylinder. The FESTO ADN-25-25-A-P-A is a double-acting compact cylinder with a 25 mm piston diameter, 25 mm stroke, and elastic end-position cushioning, delivering 295 N theoretical force at 6 bar. It is used where a short-stroke actuator must fit into a tight machine envelope — clamping fixtures, ejector slides, and compact transfer motions — and the 0.6 bar lower pressure limit allows operation from a low-pressure supply.
| Piston diameter | 25 mm |
| Stroke | 25 mm |
| Mode of operation | Double-acting |
| Cushioning | Elastic, both ends |
| Operating pressure | 0.6 bar … 10 bar |
| Theoretical force at 6 bar | 295 N advance / 247 N return |
| Piston rod thread | M8 |
| Standard | ISO 21287 |
| Order code | 536255 |
| Model | Bore | Stroke | Theoretical force at 6 bar | Port | Order code |
|---|---|---|---|---|---|
| ADN-25-25-A-P-A | 25 mm | 25 mm | 295 N | M5 | 536255 |
| ADN-32-40-A-P-A | 32 mm | 40 mm | 483 N | G 1/8 | 536274 |
| ADN-40-25-A-P-A | 40 mm | 25 mm | 754 N | G 1/8 | — |
Explore the full range in the FESTO ADN compact cylinder overview.
Data source: Technical data table.
| Item | Value |
|---|---|
| Mounting standard | ISO 21287 |
| Piston diameter | 25 mm |
| Stroke | 25 mm |
| Piston rod thread | M8 |
| Pneumatic connection | M5 |
| Cushioning | Elastic, both ends |
| Operating pressure | 0.6 bar … 10 bar |
| Ambient temperature | -20 °C … +80 °C |
The ADN series is a compact cylinder with an extruded aluminium barrel and elastic end-position cushioning. Compressed air enters one of the two ports and drives the piston; the elastic cushioning at both ends absorbs the end-of-stroke impact without an adjustable cushioning screw. This keeps the cylinder length short and eliminates the need to tune cushioning during commissioning.
The 25 mm bore produces 295 N theoretical advance force at 6 bar and 247 N return force. The 0.6 bar lower pressure limit is lower than the ADVU series (1.2 bar), so the ADN can operate from a low-pressure supply or in applications where the supply pressure fluctuates. The compact body is shorter than an ISO 15552 cylinder of the same bore and stroke, which makes it suitable for tight machine envelopes.
Not sure whether 295 N at 6 bar is sufficient for your clamp or ejector load, or need the ADVU variant for a different mounting configuration? Send your load, required force, available space, supply pressure, and mounting orientation, and we will confirm the cylinder model and accessory combination.
Q: What is the operating pressure range of the Festo ADN-25-25-A-P-A?
A: 0.6 bar to 10 bar, with a theoretical advance force of 295 N at 6 bar.
Q: What is the difference between ADN and ADVU compact cylinders?
A: ADN has a 0.6 bar lower pressure limit and elastic cushioning; ADVU has a 1.2 bar lower pressure limit and a different body design for specific mounting configurations. Both deliver the same theoretical force for the same bore.
Q: Does the ADN-25-25-A-P-A have adjustable cushioning?
A: No. The ADN series uses elastic end-position cushioning, which absorbs impact without an adjustment screw. If adjustable cushioning is required, consider the DSBC or ADN with PPV cushioning.
Q: What is the piston rod thread of the ADN-25-25-A-P-A?
A: M8 male thread, allowing eye, clevis, or coupler attachments.
Q: What is the lead time for Festo ADN-25-25-A-P-A?
A: Standard lead time is 7–17 days from order confirmation, based on the quoted supply status.
For FESTO ADN-25-25-A-P-A selection and mounting accessories, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.