HYRIG can supply the FESTO DSBG-40-254-PPVA-N3 cylinder. The FESTO DSBG-40-254-PPVA-N3 is a double-acting ISO 15552 profile cylinder with a 40 mm piston diameter, 254 mm stroke, and PPVA adjustable pneumatic cushioning at both ends. It delivers 754 N theoretical advance force at 6 bar and operates from 0.6 bar to 12 bar. It is used where a mid-size bore and a medium stroke are required in a profile cylinder body — packaging pushers, conveyor stops, and general automation transfer motions.
| Cylinder type | Profile cylinder, DSBG series |
| Piston diameter | 40 mm |
| Stroke | 254 mm |
| Mode of operation | Double-acting |
| Cushioning | PPVA adjustable pneumatic, both ends |
| Operating pressure | 0.6 bar … 12 bar |
| Theoretical force at 6 bar | 754 N advance / 633 N return |
| Piston rod thread | M12 × 1.25 |
| Pneumatic connection | G1/4 |
| Standard | ISO 15552 |
| Basic weight at 0 mm stroke | 740 g |
| Order code | 1644503 |
| Model | Bore | Stroke | Force at 6 bar advance | Cushioning | Order code |
|---|---|---|---|---|---|
| DSBG-40-254-PPVA-N3 | 40 mm | 254 mm | 754 N | PPVA adjustable | 1644503 |
| DSBG-40-250-PPVA-N3 | 40 mm | 250 mm | 754 N | PPVA adjustable | — |
Explore the full range in the FESTO DSBG ISO 15552 cylinder overview.
Data source: Technical data table.
| Item | Value |
|---|---|
| Standard | ISO 15552 |
| Piston diameter | 40 mm |
| Stroke | 254 mm |
| Pneumatic connection | G1/4 |
| Piston rod thread | M12 × 1.25 |
| Basic weight at 0 mm stroke | 740 g |
| Cushioning | PPVA adjustable, both ends |
| Operating pressure | 0.6 bar … 12 bar |
| Ambient temperature | -20 °C … +80 °C |
The DSBG series is a profile cylinder with a tie-rod design to ISO 15552. Compressed air enters one of the two G1/4 ports and drives the piston in a linear stroke. The PPVA adjustable pneumatic cushioning at both ends lets you tune the exhaust air near end position, so the load decelerates without hard impact. The cushioning screws remain accessible after mounting.
The 40 mm bore produces 754 N theoretical advance force and 633 N return force at 6 bar, the same piston area as the DSBC-40 series. The DSBG body uses a tie-rod construction, which differs from the DSBC profile barrel — the tie rods run along the outside of the cylinder tube, and the end caps are secured by nuts. This makes the DSBG suitable for applications where the cylinder may need to be disassembled for service, or where the tie-rod design matches the existing machine frame.
Not sure whether the 254 mm stroke covers your travel, or need the DSBC profile variant for a different body style? Send your required travel, load, cycle rate, supply pressure, and mounting interface, and we will confirm the cylinder model and cushioning variant.
Q: What is the theoretical force of the Festo DSBG-40-254-PPVA-N3 at 6 bar?
A: 754 N advance and 633 N return, based on the 40 mm piston area.
Q: What is the difference between DSBG and DSBC?
A: DSBG is a tie-rod profile cylinder to ISO 15552; DSBC is a profile barrel cylinder to the same standard. Both deliver the same theoretical force for the same bore, but the DSBG body uses external tie rods and can be disassembled for service.
Q: Does the DSBG-40-254-PPVA-N3 have adjustable cushioning?
A: Yes. The PPVA suffix indicates adjustable pneumatic cushioning at both ends. The cushioning screws remain accessible after mounting.
Q: Is DSBG-40-254-PPVA-N3 a direct replacement for DNC-40-254-PPV-A?
A: Mechanically yes on the ISO 15552 interface. DSBG is the successor to the DNC series with ISO 15552 dimensions. Verify port thread G1/4, stroke 254 mm, and mounting accessory before ordering.
Q: What is the lead time for Festo DSBG-40-254-PPVA-N3?
A: Standard lead time is 3–4 weeks from order confirmation, based on the quoted supply status.
For FESTO DSBG-40-254-PPVA-N3 selection and mounting accessories, contact HYRIG: info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.