The Sulzer CPN and CPT series are single-stage, horizontal overhung centrifugal pumps designed to API 610 Type OH2 (Overhung Type 2) standards. These pumps are the backbone of land‑based firewater systems, providing reliable low to medium pressure supply for refineries, chemical plants, ports, power stations, and large commercial buildings.
API 610 OH2 Construction Features
Overhung impeller design – the impeller is mounted at the end of the shaft, outside the bearing housing. Only one set of bearings supports the rotor.
Centreline supported casing – the pump feet are positioned at the shaft centreline, allowing thermal expansion without distorting alignment.
Single-stage, radial split volute casing – axial suction, radial discharge. Simple, robust hydraulic design.
Direct coupled to electric motor via a flexible spacer coupling. Both pump and motor share a common baseplate for easy alignment.
Model Range & Performance
Common models include CPN100-160, CPT125-200, and CPN80-200. The CPN series typically handles clean water and light industrial firewater. The CPT series offers enhanced corrosion resistance for mildly aggressive or seawater applications (available with bronze fitted or stainless steel trim). Flows range from 50 to 500 m³/h, heads from 40 to 150 metres, covering most NFPA 20 fire protection duty points.
Key Advantages of OH2 Configuration for Fire Pumps
Compact footprint – requires less floor space compared to between‑bearing pumps.
Easy maintenance – the back pull‑out design allows the bearing housing, shaft, impeller, and mechanical seal to be removed without disconnecting piping or disturbing the motor.
Thermal stability – centreline mounting maintains alignment under temperature changes (critical for fire pumps in hot refinery environments).
Low NPSH requirement – optimised suction design reduces cavitation risk.
Wide material selection – cast iron, ductile iron, bronze‑fitted, stainless steel, or duplex for seawater.
Typical Applications
Refinery fire ring mains (medium pressure)
Chemical plant deluge systems
Port and terminal fire hydrant networks
Power plant auxiliary firewater
Large commercial building sprinkler systems (NFPA 20 compliant)
Compliance
Fully compliant with API 610 (ISO 13709), NFPA 20, and applicable FM/UL standards (optional). Available with electric motor or diesel engine drive, explosion‑proof motor options, and full factory witness testing.
Sulzer CPN vs CPT – Which to Choose?
CPN series – baseline model for clean fresh water, industrial firewater, and cooling water. Cost‑effective.
CPT series – enhanced corrosion protection (bronze impeller, stainless steel shaft, optional coating). Suitable for seawater or brackish water fire systems.
Why the Sulzer CPN/CPT for Land‑Based Fire Protection?
Compared to vertical VS1 or submersible VS6 pumps, the OH2 configuration is the industry standard for land‑based engine rooms. Its horizontal layout simplifies inspection, alignment checks, and seal replacement. The centreline support eliminates thermal misalignment – a common issue in fire pumps that may run only during testing but must be ready at any temperature.
For complete technical datasheets (CPN100-160, CPT125-200, CPN80-200), sizing assistance, or a quotation, please contact us at info@hyrig.com. We respond within 24 hours.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.