API 610 OH2 Fractionator Bottom / Slurry Pump – Heavy-Duty Overhung Process Pump for High-Temperature Slurry Services

2026-02-27 18:11

API 610 OH2 Fractionator Bottom / Slurry Pump – Heavy-Duty Overhung Process Pump for High-Temperature Slurry Services


Product Overview

The API 610 Type OH2 Fractionator Bottom / Slurry Pump is an overhung, horizontal, centerline-mounted, single-stage, radially split centrifugal pump engineered specifically for severe high-temperature slurry services in refineries, including FCC fractionator bottoms, coker fractionator bottoms, and slurry oil handling applications. Designed and manufactured to the latest API 610 (12th Edition) standards, this pump ensures maximum reliability, extended service life, and compliance with global refinery requirements for handling high-temperature hydrocarbons containing catalyst fines and coke particles.


Why You Need This Pump ?

Fractionator bottom and slurry pumps operate in one of the most demanding environments in any refinery – combining high temperatures with abrasive solids. Common challenges include:

  • High-temperature fluids typically 340–400°C containing catalyst fines, coke particles, and other abrasive solids.

  • Abrasive slurry handling – entrained solids cause rapid erosion of standard pump materials.

  • Risk of erosion and plugging due to solids loading in the slurry.

  • Low available NPSH from fractionator towers operating at high temperatures near boiling conditions.

  • Thermal expansion causing misalignment, distortion, and seal failure in conventionally designed pumps.

  • Continuous critical operation – any unplanned downtime disrupts the entire refining process.

  • Reduced material strength at elevated temperatures requiring careful material selection.

The API 610 OH2 Fractionator Bottom / Slurry Pump, with its centerline-mounted design, abrasion-resistant features, and high-temperature capabilities, is the proven solution for these extreme fractionator bottom and slurry conditions.


Key Advantages

1. Full Compliance with API 610 (12th Edition)

  • Designed, manufactured, and tested to the stringent requirements of API 610 12th Edition (ISO 13709).

  • Centerline-mounted casing ensures thermal expansion remains concentric, maintaining alignment from cold start-up to full operating temperature.

  • Full documentation and traceability for all critical components.

2. High-Temperature Design for Severe Service

  • Engineered for continuous operation at temperatures up to 425°C (800°F).

  • Centerline mounting allows uniform thermal expansion without distorting the casing or affecting alignment.

  • Finned bearing housing and fan cooling for extended bearing life at high temperatures.

  • Optional water-cooled bearing housings for extreme temperature applications.

3. Abrasion-Resistant Hydraulic Design

  • Specially designed flow passages minimize erosion from catalyst fines and coke particles.

  • Generous internal clearances reduce risk of solids jamming and plugging.

  • Hardened materials and optional wear-resistant coatings for extended life in slurry service.

  • Replaceable wear rings and liners designed for easy field replacement.

4. Rigid Shaft for Minimal Deflection

  • Extra heavy-duty shaft design with deflection far below API 610 limits.

  • First critical speed well above operating speed range for smooth, vibration-free operation.

  • Minimal shaft deflection provides ideal conditions for mechanical seal reliability and long life – critical in abrasive slurry service.

5. Heavy-Duty Bearing Systems

  • Large-capacity oil-lubricated bearings handle radial and thrust loads from slurry operation.

  • Available lubrication options include oil ring, splash oil, purge mist, or pure oil mist.

  • Bearing isolators protect against contamination from catalyst fines and environment.

  • Bearing life calculated for minimum 25,000 hours continuous operation.

6. Enhanced Mechanical Seal Environment

  • API 682 compliant seal chambers for cartridge-type mechanical seals.

  • Rigid shaft and minimal deflection extend mechanical seal life in high-temperature slurry service.

  • Optional seal flush plans specifically designed for abrasive slurry service, including clean water flush systems.

  • Accepts various API 682 seal plans suitable for high-temperature hydrocarbons with solids.

7. Optimized Hydraulic Design for Slurry Service

  • High-efficiency closed impeller design with wear-resistant features.

  • Optional open impeller design for improved solids handling capability.

  • Wear rings and balance holes optimized to maximize seal and bearing life.

  • Impeller dynamically balanced for vibration-free operation.

8. Robust Casing Design

  • Casings designed for 2x API 610 nozzle loads, ensuring freedom from piping distortions.

  • 300# flange rating standard with 600# optional for higher pressure requirements.

  • Jacketed casings available for special services requiring heating or cooling.

  • Thick cross-sections in wear areas for extended service life.

9. Material Options for High-Temperature Slurry Service

  • Available in carbon steel, chrome-moly alloys, and stainless steels for high-temperature strength.

  • Optional hardened materials and wear-resistant overlays for erosion resistance.

  • Material selection based on operating temperature, solids concentration, and fluid corrosivity.

  • NACE compliant options for sour service applications.

10. Abrasion-Resistant Shaft Sleeve

  • Hardened shaft sleeve protects shaft at seal area.

  • Replaceable without shaft removal.

  • Optional ceramic or tungsten carbide coatings for maximum abrasion resistance.

11. Reduced Emissions Design

  • API 682 cartridge mechanical seals for reduced fugitive emissions.

  • Compliant with stringent environmental regulations.

  • Optional seal flush plans for optimized seal performance.

12. Ease of Maintenance

  • Back pull-out design allows rotor removal without disturbing piping or driver.

  • Replaceable wear components designed for rapid field replacement.

  • Standardized components simplify spare parts inventory.

13. Wide Performance Range

  • Capacities up to 2,250 m³/h (10,000 US gpm).

  • Heads up to 360 meters (1,200 feet).

  • Pressures up to 75 bar (1,100 psi).

  • Multiple hydraulic coverages for optimal fit to duty.

14. Driver Flexibility

  • Suitable for electric motor or steam turbine drivers.

  • Heavy-duty baseplates designed for 2x API 610 nozzle loads.


Customer Value

Operational Reliability

  • Continuous, trouble-free operation in critical fractionator bottom and slurry services.

  • Eliminates unplanned shutdowns that disrupt refinery production.

  • Confidence that pumps will run reliably between scheduled maintenance intervals.

Slurry Handling Capability

  • Abrasion-resistant design handles catalyst fines and coke particles without premature failure.

  • Protects downstream equipment from erosion damage.

  • Reliable performance in the most challenging slurry applications.

High-Temperature Performance

  • Centerline mounting maintains alignment from cold start-up to full operating temperature.

  • Prevents distortion and binding during thermal transients.

  • Extended mechanical seal and bearing life in high-temperature service.

Extended Equipment Life

  • Wear-resistant features and materials extend pump life in abrasive slurry service.

  • Rigid shaft design minimizes deflection, protecting seals and bearings.

  • Designed for long-term service in refinery critical applications.

Reduced Maintenance

  • Abrasion-resistant components reduce wear-related failures.

  • Minimal shaft deflection extends seal and bearing life.

  • Back pull-out design reduces maintenance time.

  • Lower maintenance costs over pump life.

Process Stability

  • Reliable slurry transport ensures consistent feed to downstream units.

  • Prevents costly production interruptions.

  • Stable operation under varying feed conditions and solids loading.

Compliance and Safety

  • Meets API 610 and international standards for refinery pumps.

  • Reduced emissions design meets environmental regulations.

  • Safe, reliable operation in critical hydrocarbon slurry services.

Peace of Mind

  • Plant management confidence in fractionator unit reliability.

  • Operations team trust in equipment performance.

  • Maintenance team appreciation for serviceability and extended wear life.


Typical Applications

Refinery Fractionator Services

  • FCC (Fluid Catalytic Cracking) fractionator bottoms

  • Coker fractionator bottoms

  • Main fractionator bottoms

  • Slurry oil / decanted oil pumping

  • Heavy slurry transfer

High-Temperature Slurry Services

  • Catalyst fines handling

  • Coke fines handling

  • Heavy hydrocarbon slurry transfer

  • Process applications requiring solids handling at elevated temperatures

Refinery Process Services

  • Column bottoms with entrained solids

  • Hot oil circulation with solids

  • Heavy residue transfer

  • Slurry recycle services


Why Choose Our API 610 OH2 Fractionator Bottom / Slurry Pump?

  • Decades of proven performance in refineries worldwide for critical fractionator bottom and slurry services.

  • Engineering excellence – robust design with rigid shaft, centerline mounting, and abrasion-resistant features for reliable slurry handling.

  • Slurry experience – thousands of pumps operating reliably in FCC and coker fractionator services.

  • Custom engineered for your specific operating conditions (temperature, flow, head, solids concentration, particle size).

  • Global reference list – proven reliability in the most demanding slurry applications.

  • Lifecycle support – genuine OEM parts, service, and engineering support for the entire pump life.


More Sulzer API 610 Pumps:

API 610 BB2 Low Pressure Charge Pump – Heavy-Duty Refinery Centrifugal Pump for Low Suction Pressure Charge Services
API 610 BB2 Fractionator Bottom Pump – Heavy-Duty Refinery Centrifugal Pump for FCC & Coker Fractionator Service
API 610 BB2 Vacuum Tower Bottom Pump – Heavy-Duty Refinery Centrifugal Pump for Severe Vacuum Residue Service
API 610 BB2 Atmospheric Tower Bottom Pump – Heavy-Duty Refinery Centrifugal Pump
API 610 BB2 Power Plant Circulation Pump ZE 800-900
API 610 BB2 Water Works Pump ZE 700-800
API 610 BB2 Seawater Intake Pump ZE 600-700
API 610 BB2 Cooling Water Circulation Pump ZE 500-600
API 610 BB2 Light Oil / Product Oil Transfer Pump ZE 450-550
API 610 BB2 Boiler Feed Water Pump ZE 400-500
API 610 BB2 Power Plant Circulation Pump GSG 800-900
API 610 BB2 Water Works Pump GSG 700-800
API 610 BB2 Seawater Intake Pump GSG 600-700
API 610 BB2 Cooling Water Circulation Pump GSG 500-600
API 610 BB2 Oil Transfer Pump GSG 450-550
API 610 BB2 Boiler Feed Water Pump GSG 400-500
API 610 OH2 Low-Flow High-Head Pump OHHL 25×20×160
API 610 OH2 Fractionator Bottom / Slurry Pump OHH 100×80×315
API 610 OH2 Tower Bottom / High Temperature Process Pump OHH 80×65×250
API 610 OH2 Light Hydrocarbon / Amine Circulation Pump OHH 65×50×225
API 610 OH2 Charge / Boiler Auxiliary Pump OHH 50×40×200
API 610 BB2 Cooling Water Pump for Power Plant BBS 24×30×42
API 610 BB2 Seawater Pump Sulzer BBS 20×24×36
API 610 BB2 Fractionator Bottom / SWRO High Pressure Pump BBS 18×22×33
API 610 BB2 Vacuum Tower Bottom / Critical Service Pump BBS 16×20×31
API 610 BB2 BBS 14×18×27L Atmospheric Tower Bottom Pump
Sulzer BBS 12×16×27K API 610 BB2 General Purpose Process Pump
Sulzer BBS 12×14×24 API 610 BB2 Boiler Feed Water Boosting Pump
Sulzer BBS 10×12×22 API 610 BB2 Low Pressure Charge Pump
Sulzer ZE 500-600 Axially Split Double-Suction Cooling Pump for Metallurgy and Mining Industrial Environments
Sulzer ZE 700-800 Axially Split Double-Suction Water Works Pump for Municipal Water Supply
Sulzer ZE 600-700 Axially Split Double-Suction Seawater Pump for Intake and Desalination Plants
Sulzer ZE 450-550 Axially Split Double-Suction Oil Transfer Pump for Light Oil, Diesel, and Solvent Services
Sulzer ZE 500-600 Axially Split Double-Suction Cooling Water Pump for Refinery and Petrochemical Utility Services
Sulzer ZE 400-500 Axially Split Double-Suction Boiler Feed Pump for Demineralized Water Transfer
Sulzer ZE 800-900 Large-Flow Axially Split Double-Suction Pump for Power Plant Cooling Water Circulation
Sulzer GSG 500-600 Double-Split Centrifugal Cooling Pump for Metallurgy and Mining Industrial Environments
Sulzer GSG 700-800 Double-Split Centrifugal Water Works Pump for Municipal Water Supply
Sulzer GSG 600-700 Double-Split Centrifugal Seawater Pump for Intake and Desalination Plants
Sulzer GSG 450-550 Double-Split Centrifugal Oil Transfer Pump for Refinery Light Oil, Diesel, and Solvent Services
Sulzer GSG 500-600 Double-Split Cooling Water Pump for Refinery and Petrochemical Utility Services
Sulzer GSG 400-500 High-Efficiency Double-Split Boiler Feed Water Pump for Demineralized Water Transfer
Sulzer GSG 800-900 Large-Flow Double-Split Centrifugal Pump for Power Plant Circulation Systems
Sulzer OHH 80×65×250 Heavy-Duty API 610 OH2 Coking Service Pump with Wear-Resistant Design for Coke Slurry
Sulzer OHH 100×80×315 Heavy-Duty API 610 OH2 Wear-Resistant Transfer Pump with SUME Coating for Abrasive Oil Sands Service
Sulzer OHHL 25×20×160 Low Flow High Head API 610 Pump with Unique Impeller-Diffuser Design
Sulzer OHH 50×40×200 API 610 OH2 Boiler Auxiliary Pump for Power Plant Deaerated Water and Boiler Feed Boosting
Sulzer OHH 100×80×315 API 610 OH2 Seawater Booster Pump for Desalination and Offshore Platforms
Sulzer OHH 100×80×315 Heavy-Duty API 610 OH2 Critical Service Pump for High-Temperature, High-Pressure Circulation
Sulzer OHH 65×50×225 API 610 OH2 Amine Circulation Pump for Desulfurization Systems
Sulzer OHH 80×65×250 API 610 OH2 High Temperature Process Pump for Corrosive Chemical Fluids
Sulzer OHH 80×65×250 API 610 OH2 Gas Oil Pump for LVGO/HVGO Transfer in Vacuum Units
Sulzer OHH 65×50×225 General-Purpose API 610 OH2 Process Pump for Light Hydrocarbon and Flammable Solvent Transfer
Sulzer OHH 50×40×200 Compact High-Efficiency API 610 OH2 Charge Pump for Low-Pressure Refinery Service
Sulzer OHH 100×80×315 Heavy-Duty API 610 OH2 Large-Flow Pump for Fractionator Bottom and Slurry Service
Sulzer OHH 80×65×250 API 610 OH2 Centerline-Mounted Overhung Pump for Atmospheric/Vacuum Tower Bottom Service
Sulzer BBS 14×18×27L Heavy-Duty API 610 Coke Grinding Pump for Particle-Laden Coking Plant Services


Name:
Message:
Verification code:
Submit
Comment