The Circulating Sub is a specialized connector that serves as an access point for drilling fluid circulation when a conventional path is not available. It is primarily used during casing operations, where it is installed between the wellhead pipe string and the ground circulating system.
This tool is typically connected between the kelly and the top of the casing string, or between casing joints and a hose. One end features a standard casing pin thread (e.g., BTC, LTC, STC), allowing it to screw directly into the casing. The other end is equipped with either a drill pipe thread (such as nC38, nC50) or a hammer union thread (like 2" 1502 Union), providing a universal interface for rig circulation equipment. This design allows operators to quickly establish a circulation loop to pump fluids down the casing, essential for well control, displacing fluids, or cleaning the wellbore, thereby ensuring a safer and more efficient operation.
Specifications - Circulating Sub With Drill Pipe Thread
| Casing Thread | Drill Pipe Box Connection | I.D. (mm) | Length (mm) |
|---|---|---|---|
| 5" BTC, LTC, STC | nC38 | 57 | 580 |
| 5 1/2" BTC, LTC, STC | nC38 | 57 | 580 |
| 7" BTC, LTC, STC | nC50 | 71 | 610 |
| 9 5/8" BTC, LTC, STC | nC50 | 71 | 610 |
| 10 3/4" BTC, STC | nC50 | 71 | 610 |
| 13 3/8" BTC, STC | nC50 | 71 | 650 |
Specifications - Circulating Sub With Hammer Union Thread
| Casing Thread | Union Thread | I.D. (mm) | Length (mm) |
|---|---|---|---|
| 5" BTC | 2" 1502 Union | 50.8 | 500 |
| 5 1/2" BTC | 2" 1502 Union | 50.8 | 500 |
| 7" BTC, LTC | 2" 1502 Union | 50.8 | 500 |
| 9 5/8" BTC, LTC | 2" 1502 Union | 50.8 | 500 |
| 10 3/4" BTC, STC | 2" 1502 Union | 50.8 | 560 |
| 13 3/8" BTC | 2" 1502 Union | 50.8 | 610 |
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.