Eddy Current Brakes

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Deep Capacity: Optimized for rigs drilling to 9000m with 4 1/2″ drill pipe.

Zero Wear Operation: Magnetic non-contact design ensures longevity and reliability.

Thermal Excellence: Vacuum-pressure-dipped Class F/H insulation and active water cooling handle extreme loads.

Precision Integration: Involute spline clutch ensures seamless connection to drum shaft.
Conatct For Details
DetailReview(0)Additional

Eddy Current Brakes


Design Features


1. DS water-cooled eddy current brakes are suitable for auxiliary brake requirement of drawworks for rigs with depth range of 4000~9000m (4 1/2" drill pipe).

2. The rotor and the stator are made of high quality magnetic materials and subjected to heat treatment. There is a gap between rotor and magnetic pole so no wear occurs during operation.

3. Coils are made of single polyimide wire wrapped with glass fibre and are dip coating of vacuum pressure in twice. The insulation level is Class F or H.

4. The cooling water is supplied by a circulating water pump to ensure that the heat generated by the brake can be dissipated even under maximum load.

5. Rotor shafts are supported on double-row radial spherical roller bearings.

6. To connect with the drum shaft by means of involute spline tooth clutch


Specifications of Eddy Current Brakes



Model                            DS40         
Rated stop torque kN.m(Lb.-Ft.)44(32600)
Applicable depth range m2500-4000
Max.Exciting power KW9
Exciting coil(H Class)4
Amount of cooling water L/min(gpm)190(50)
Max.Temperature of inlet water ℃42
Max.Temperature of outlet water ℃72

Model                              DS50             
Rated stop torque kN.m(Lb.-Ft.)60.76(45000)
Applicable depth range m3500-5000
Max.Exciting power KW12
Exciting coil(H Class)4
Amount of cooling water L/min(gpm)285(75)
Max.Temperature of inlet water ℃42
Max.Temperature of outlet water ℃72

Model                            DS70             
Rated stop torque kN.m(Lb.-Ft.)107.8(79500)
Applicable depth range m4500-7000
Max.Exciting power KW23.5
Exciting coil(H Class)4

Amount of cooling water L/min(gpm)
560(148)
Max.Temperature of inlet water ℃42
Max.Temperature of outlet water ℃72

Model                            DS80           
Rated stop torque kN.m(Lb.-Ft.)130(95940)
Applicable depth range m5000-8000
Max.Exciting power KW25
Exciting coil(H Class)4
Amount of cooling water L/min(gpm)700(184)
Max.Temperature of inlet water ℃42
Max.Temperature of outlet water ℃78

Model                              DS90
Rated stop torque kN.m(Lb.-Ft.)145(107010)
Applicable depth range m6000-9000
Max.Exciting power KW30
Exciting coil(H Class)4
Amount of cooling water L/min(gpm)800(211)
Max.Temperature of inlet water ℃42
Max.Temperature of outlet water ℃78





Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit