Mechanical Driven Drawworks
Design Features
1.Bearings are rolling ones and shafts are made of alloy steel.
2.Chains with high accuracy and high strength are pressure lubricated.
3.On the drum there is a spiral groove. The low-speed & high-speed ends of drum shaft are equipped with a ventilating air clutch.
4.The contours of the sprocket teeth are intermediate frequency quenched. All clutches of shifting gears are of involute spline type.
5.Drawworks transmission: 4(F) and 2 (R) or 6 (F) and 2 (R). Gear-shifting mode: air.
6.Either band brake or disc brake is regarded as main brake and either eddy current brake or Eaton brake (water or air cooled) is regarded as auxiliary brake.
7.Equipped with auto feed driller or emergency motor.
Basic Parameters of Mechanical Driven Drawworks
| Model | JC40 | |
| Nominal depth range m | φ114mm DP | 2500-4000 |
| φ127mm DP | 2000-3200 | |
| Rated input power | kW(hp) | 735(1000) |
| Max.Pull of fast line | kN | 275 |
| Dia.of wire line | mm (in) | 32(1 1/4) |
| Band brake | mm(in) | 640×1237 (2514×48314) |
| Drum(Dia×Length) | ||
| Brake rim(Dia×width) | mm (in) | 1168×265 (46×10 1/2) |
| Disc brake | mm (in) | 640×1139 |
| Drum(Dia×Length) | (2514×44 7/8) | |
| Brake disc(Dia×Width) | mm(in) | 1500×76(59×3) |
| Auxiliary brake | DS40 | |
| Overall dimension (L×W×H) | mm | 6450×2560×2482 |
| Model | JC50 | |
| Nominal depth range m | φ114mm DP | 3500-5000 |
| φ127mm DP | 2800-4500 | |
| Rated input power | kW(hp) | 1100(1500) |
| Max.Pull of fast line | kN | 340 |
| Dia.of wire line | mm (in) | 35(1 3/8) |
| Band brake | mm(in) | 685×1245 (27×49) |
| Drum(Dia×Length) | ||
| Brake rim(Dia×width) | mm (in) | 1270×267 (50×10 1/2) |
| Disc brake | mm (in) | 685×1138 |
| Drum(Dia×Length) | (27×44 1/8) | |
| Brake disc(Dia×Width) | mm(in) | 1600×76(63×3) |
| Auxiliary brake | DS50 | |
| Overall dimension (L×W×H) | mm | 7000×2955×2780 |
| Model | JC70 | |
| Nominal depth range m | φ114mm DP | 4500-7000 |
| φ127mm DP | 4000-6000 | |
| Rated input power | kW(hp) | 1470(2000) |
| Max.Pull of fast line | kN | 485 |
| Dia.of wire line | mm (in) | 38(1 1/2) |
| Band brake | mm(in) | 770×1439 (30×56518) |
| Drum(Dia×Length) | ||
| Brake rim(Dia×width) | mm (in) | 1370×267 (54×10 1/2) |
| Disc brake | mm (in) | 770×1361 |
| Drum(Dia×Length) | (30×53 5/8) | |
| Brake disc(Dia×Width) | mm(in) | 1600×76(63×3) |
| Auxiliary brake | DS70 | |
| Overall dimension (L×W×H) | mm | 7930×3194×2930 |
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.