DEMCO GATE VALVES
Introduction
DEMCO Series DM gate valves, the premier gate valve in the oil and gas drilling market, are specifically engineered
for the rigorous requirements of oilfield applications. Designed for dependable, heavy-duty performance in abrasive service
conditions, DEMCO DM gate valves are commonly selected for a number of oilfield applications, including:
• Drilling standpipe manifold
• Pump manifold block valves
• High-pressure mud mixing lines
• High-pressure drilling system block valves
The DEMCO Series DM gate valves are available in ASME Classes 600, 900, and 1500. They also are available in API working
pressures 2000, 3000, and 5000 psig (not API monogrammed).
Ordering Information
• Give size, pressure class, and end connection.
• Specify Working Conditions
DEMCO Series DM Gate Valves Design Features
Engineered for extreme oil & gas applications (e.g., abrasive slurries, high pressure, corrosive media), the DM Series delivers robust performance through the following innovations:
1. Structural Design: Heavy-Duty & Operator-Friendly
Rising Stem Mechanism
Visual stem position indicates valve status (open/closed).
Permanent lubrication system + dual sealing (high/low-pressure) minimizes operating torque.
Solid Gate & Resilient Seating
Monolithic solid gate construction with NBR/FKM elastomer seats resists impact and wear.
Compact Actuation & Maintenance
Manual operation (handwheel/lever) or optional hydraulic/pneumatic actuation.
Modular internals (e.g., removable seats/gate) enable in-situ maintenance without valve body disassembly.
2. Sealing Technology: For Demanding Media & Pressure
Dual-Sealing Configuration
Soft Seal: Standard NBR/HNBR seats (oil/H₂S resistant); optional FKM/Hypalon™ for chemical resistance.
Hard Seal: Ni-plated carbon steel, 316SS, or Monel® gates for abrasive/solid-laden fluids.
Pressure-Assisted Sealing
Combines self-energizing (media pressure enhances seal) with mechanical reinforcement for bubble-tight shutoff.
3. Materials & Craftsmanship: Corrosion Resistance & Longevity
Body: 4130/4140 alloy steel (NACE MR0175 compliant for H₂S/CO₂ service).
Critical Internals:
Gate: 410SS (standard) / 316SS (high-corrosion).
Stem: 410SS / 303SS (hardened surface).
Full Traceability: Material certs & manufacturing records (PSL3/PSL4) per API 6A.
4. Pressure Ratings & Connections: High-Pressure Flexibility
Pressure Classes: 2000, 3000, 5000, and 7500 psi (drilling to production).
End Connections:
| Type | Application |
| Butt Weld | High-pressure permanent piping |
| Flanged | (ASME/API)Standard wellhead equipment |
| Threaded (NPT) | Auxiliary lines/maintenance points |
| Hammer Union | Quick-connect mud lines |
5. Application-Specific Optimizations
Typical Service:
HP mud pump manifolds, fracturing units, drilling risers.
Sour gas/oil transfer, cementing, chemical injection.
Certifications:
API 6A (PSL1-PSL4, PR2 leakage control).
NACE MR0175 (H₂S service).
Summary
The DEMCO DM Series excels in combining rugged construction, adaptive sealing,
and corrosion-resistant materials to address compounding challenges in abrasive,
high-pressure, and corrosive oilfield environments. Its modular maintenance design
further reduces lifecycle costs, making it a critical solution for deep drilling and
unconventional resource development.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.