The union ends mud gate valve is mainly used for drilling mud circulating system in oil field, It is used to control the flowing and stopping of mud.
The equipment has strong rigidity is safe and reliable, The union ends mud gate valve seat and gate are sealed by means of parallel-type Metal to Metal Sealing, The effection of sealing is good,It is convenient to open, The two ends of the valve and pipes are joined and staled with spherical movement, The movable connection of the rubber seal ring like ''O'' is not of high requirement about straightness of the two ends of pipes, When is fitted and its seal performance is very good.
Z23Y Mud Valves Features:
1 This valve, belonging to rising-stem plate gate valve, consists of valve body, valve seat, valve gate, stem, bonnet, stem nut, packing etc.
2 All parts with moist surface are made of alloy steel or stainless steel, which can meet the service requirement specified by the technology specification;
3 The floating seat for this valve can ensure the effective seal between valve seat and gate, a nickel-base alloy layer shall be laid on the faces, so the hardness is up to 45~62HRC enough to resist the abrasion and erosion so as to prolong the working life of the product.
4 lip-type packing can ensure the nominal seal property under the normal and high pressure.
5 Turn the hand wheel anti-clockwise, and valve executes “open” movement, while the stem enters top seal, gate flow hole is connected through with the hole of seat, so this valve shall be completely open; turn the hand wheel clockwise, and valve executes “close” movement, and at the end of closing entirely, reverse the hand wheel about 1/4 circle to make the disk at float position, so the valve creates the seal of sealing faces.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.