DC Motor Driven Drawworks
Design Features
1.Bearings are roller ones and shafts are made of alloy steel.
2.On the drum there is a spiral groove. The low-speed & high-speed ends of drum shaft are equipped with a ventilating air clutch.
3.The hydraulic disc brake is regarded as main brake. The disc brake is water or air cooled.
4.Either eddy current brake or Eaton break (air & water cooled) is considered as an auxiliary brake.
5.Drawworks transmission: 4(F) and 4 (R).Gear-shifting mode: air
6.Chain drive structure.
7.Chains are pressure lubricated and bearings are greased.
8.Integral or split construction
9.An auto feed driller with motor is available.
Basic Parameters of DC Motor Driven Drawworks
| Model | JC40D | ||
| Nominal depth range m | φ114mm DP | 2500-4000 | |
| φ127mm DP | 2000-3200 | ||
| Rated input power kW(hp) | 735(1000) | ||
| Number×Rated Power of motors kW | 2×580 | ||
| Rated speed of motor r/min | 880/970 | ||
| Dia.of wire line mm (in) | 32(1 1/4) | ||
| Max.Pullof fast line kN | 275 | ||
| Drum(Dia×Length)mm(in) | Band brake | 640×1235(25114×4812) | |
| Brake rim(Dia×Width) mm(in) | 1168×265(46×10 1/2) | ||
| Drum(Dia×Length)mm(in) | Disc brake | 640×1139(2514×44 7/8) | |
| Brak rim (Dia× Width)mm(in) | 1500×40(59×1 1/2) | ||
| Sandline reel (Dia× Length)mm(in) | 356×1245(14×49) | ||
| Capacity of sandline reel (Φ14.5 wire line)m(ff) | 4000(13120) | ||
| Auxiliary brake | DS40 | ||
| Overall dimension (L×W×H) mm | 6600×3716×2990 | ||
| Model | JC50D | ||
| Nominal depth range m | φ114mm DP | 3500-5000 | |
| φ127mm DP | 2800-4500 | ||
| Rated input power kW(hp) | 1100(1500) | ||
| Number×Rated Power of motors kW | 2×800 | ||
| Rated speed of motor r/min | 970 | ||
| Dia.of wire line mm (in) | 35(1 3/8) | ||
| Max.Pullof fast line kN | 340 | ||
| Drum(Dia×Length)mm(in) | Band brake | 685×1245(27×49) | 685×1245 (27×49) |
| Brake rim(Dia×Width) mm(in) | 1270×267(50×10 1/2) | 1270×267(50×10 1/2) | |
| Drum(Dia×Length)mm(in) | Disc brake | 685×1138(27×44 7/8) | 685×1245(49) |
| Brak rim (Dia× Width)mm(in) | 1600×76(63×3) | 1600×76(63×3) | |
| Sandline reel (Dia× Length)mm(in) | 356×1245(14×49) | ||
| Capacity of sandline reel (Φ14.5 wire line)m(ff) | 5000(16400) | ||
| Auxiliary brake | DS50 | ||
| Overall dimension (L×W×H) mm | 6800×4537×2998 | ||
| Model | JC70D | ||
| Nominal depth range m | φ114mm DP | 4500-7000 | |
| φ127mm DP | 4000-6000 | ||
| Rated input power kW(hp) | 1470 (2000) | ||
| Number×Rated Power of motors kW | 2×800 | ||
| Rated speed of motor r/min | 970 | ||
| Dia.of wire line mm (in) | 38(1 1/2) | ||
| Max.Pullof fast line kN | 485 | ||
| Drum(Dia×Length)mm(in) | Band brake | 770×1439(30×56⁵/8) | |
| Brake rim(Dia×Width) mm(in) | 1370×267(54×10 1/2) | ||
| Drum(Dia×Length)mm(in) | Disc brake | 770×1361(30×53 5/8) | |
| Brak rim (Dia× Width)mm(in) | 1600×76 (63×3) | ||
| Sandline reel (Dia× Length)mm(in) | 356×1245 (14×49) | ||
| Capacity of sandline reel (Φ14.5 wire line)m(ff) | 6400 (21000) | ||
| Auxiliary brake | DS70 | ||
| Overall dimension (L×W×H) mm | 7670×4585×3197 | ||
| Model | JC80D | ||
| Nominal depth range m | φ114mm DP | - | |
| φ127mm DP | 5000-8000 | ||
| Rated input power kW(hp) | 2210(3000) | ||
| Number×Rated Power of motors kW | 3x800 | ||
| Rated speed of motor r/min | 970 | ||
| Dia.of wire line mm (in) | 42(1 5/8) | ||
| Max.Pullof fast line kN | 553 | ||
| Drum(Dia×Length)mm(in) | Band brake | - | |
| Brake rim(Dia×Width) mm(in) | - | ||
| Drum(Dia×Length)mm(in) | Disc brake | 914x1656(36×65 1/4) | |
| Brak rim (Dia× Width)mm(in) | 1730x76(68x3) | ||
| Sandline reel (Dia× Length)mm(in) | - | ||
| Capacity of sandline reel (Φ14.5 wire line)m(ff) | - | ||
| Auxiliary brake | DS80 | ||
| Overall dimension (L×W×H) mm | 7670x5755x2800 | ||
| Model | JC90D | ||
| Nominal depth range m | φ114mm DP | ||
| φ127mm DP | 6000-9000 | ||
| Rated input power kW(hp) | 2210 (3000) | ||
| Number×Rated Power of motors kW | 3×800 | ||
| Rated speed of motor r/min | 970 | ||
| Dia.of wire line mm (in) | 45(1 3/4) | ||
| Max.Pullof fast line kN | 640 | ||
| Drum(Dia×Length)mm(in) | Band brake | - | |
| Brake rim(Dia×Width) mm(in) | -- | ||
| Drum(Dia×Length)mm(in) | Disc brake | 914×1556(36×61 1/4) | |
| Brak rim (Dia× Width)mm(in) | 1730×76 (68×3) | ||
| Sandline reel (Dia× Length)mm(in) | - | ||
| Capacity of sandline reel (Φ14.5 wire line)m(ff) | - | ||
| Auxiliary brake | DS90 | ||
| Overall dimension (L×W×H) mm | 8670×5755×2800 | ||
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.