API 610 OH2 High Temperature Process Pump – Heavy-Duty Overhung Process Pump for High-Temperature Refinery and Petrochemical Services
The API 610 Type OH2 High Temperature Process Pump is an overhung, horizontal, centerline-mounted, single-stage, radially split centrifugal pump engineered specifically for reliable high-temperature service in refineries, petrochemical plants, and other process industries. Designed and manufactured to the latest API 610 (12th Edition) standards, this pump ensures maximum reliability, extended service life, and compliance with global requirements for handling high-temperature hydrocarbons, heat transfer fluids, and other elevated-temperature process streams.
High temperature process pumps operate in demanding conditions where thermal expansion, material strength, and continuous operation are critical. Common challenges include:
Elevated operating temperatures typically ranging from 150°C to 425°C (300°F to 800°F) or higher.
Thermal expansion causing misalignment, distortion, and seal failure in conventionally designed pumps.
Reduced material strength at elevated temperatures requiring careful material selection.
Low available NPSH from towers, reactors, or vessels operating at high temperatures near boiling conditions.
Potential for coking and fouling in some high-temperature hydrocarbon services.
Continuous critical operation – any unplanned downtime disrupts process units and causes significant production losses.
Significant piping loads due to thermal expansion of connected piping systems.
The API 610 OH2 High Temperature Process Pump, with its centerline-mounted design and high-temperature features, is the proven solution for these demanding applications.
1. Full Compliance with API 610 (12th Edition)
Designed, manufactured, and tested to the stringent requirements of API 610 12th Edition (ISO 13709).
Centerline-mounted casing ensures thermal expansion remains concentric, maintaining alignment from cold start-up to full operating temperature.
Full documentation and traceability for all critical components.
2. High-Temperature Design
Engineered for continuous operation at temperatures up to 425°C (800°F).
Centerline mounting allows uniform thermal expansion without distorting the casing or affecting alignment.
Finned bearing housing and fan cooling for extended bearing life at high temperatures.
Optional water-cooled bearing housings for extreme temperature applications.
Thermal expansion features accommodate temperature changes without distortion or binding.
3. Rigid Shaft for Minimal Deflection
Extra heavy-duty shaft design with deflection far below API 610 limits.
First critical speed well above operating speed range for smooth, vibration-free operation.
Minimal shaft deflection provides ideal conditions for mechanical seal reliability and long life at elevated temperatures.
4. Heavy-Duty Bearing Systems
Large-capacity oil-lubricated bearings handle radial and thrust loads.
Available lubrication options include oil ring, splash oil, purge mist, or pure oil mist.
Bearing life calculated for minimum 25,000 hours continuous operation.
Optional condition monitoring provisions for vibration and temperature.
Bearing isolators protect against contamination and oil leakage.
5. Enhanced Mechanical Seal Environment
API 682 compliant seal chambers for cartridge-type mechanical seals.
Rigid shaft and minimal deflection extend mechanical seal life in high-temperature service.
Accepts various API 682 seal plans suitable for high-temperature hydrocarbons (Plans 11, 13, 21, 23, 32, 62).
Optional heated/cooled stuffing box for temperature control.
Finned stuffing box or optional cooling for optimal seal environment.
6. Optimized Hydraulic Design
High-efficiency enclosed impeller design for optimal performance across the operating range.
Wear rings and balance holes optimized to maximize seal and bearing life.
Optional improved suction performance and inducers available for low NPSH applications.
Impeller dynamically balanced for vibration-free operation.
Stable head curve characteristics for reliable system integration.
7. Robust Casing Design
Casings designed for 2x API 610 nozzle loads, ensuring freedom from piping distortions.
300# flange rating standard with 600# and 900# optional for higher pressure requirements.
Tangential discharge nozzle for simplified piping layouts.
Jacketed casings available for services requiring heating or cooling.
8. Material Options for High-Temperature Service
Available in carbon steel, chrome-moly alloys (such as ASTM A217 C5, C12), and stainless steels for high-temperature strength and corrosion resistance.
Material selection based on operating temperature, fluid corrosivity, and service conditions.
NACE compliant options for sour service applications.
9. Reduced Emissions Design
API 682 cartridge mechanical seals for reduced fugitive emissions.
Compliant with stringent environmental regulations.
Optional seal flush plans for optimized seal performance.
10. Fouling and Coking Resistance
Design features to minimize coke formation and fouling in high-temperature hydrocarbon service.
Smooth flow passages reduce residence time and deposition.
Appropriate material selection for coking resistance.
11. Wide Performance Range
Capacities up to 2,250 m³/h (10,000 US gpm).
Heads up to 360 meters (1,200 feet).
Pressures up to 75 bar (1,100 psi) with higher options available.
Multiple hydraulic coverages for optimal fit to duty.
12. Ease of Maintenance
Back pull-out design allows rotor removal without disturbing piping or driver.
Replaceable wear rings and components for economical refurbishment.
Standardized components simplify spare parts inventory.
13. Driver Flexibility
Suitable for electric motor or steam turbine drivers.
Heavy-duty baseplates designed for 2x API 610 nozzle loads.
Optional variable frequency drive (VFD) compatibility for flow control.
Operational Reliability
Continuous, trouble-free operation in critical high-temperature services.
Eliminates unplanned shutdowns that disrupt process units.
Confidence that pumps will run reliably between scheduled turnarounds.
High-Temperature Performance
Centerline mounting maintains alignment from cold start-up to full operating temperature.
Prevents distortion and binding during thermal transients.
Extended mechanical seal and bearing life in high-temperature service.
Extended Equipment Life
Rigid shaft design minimizes deflection, protecting seals and bearings.
High-temperature materials and cooling features ensure long service life.
Designed for minimum 20 years service life in process critical service.
Reduced Maintenance
Minimal shaft deflection extends seal and bearing life.
Back pull-out design reduces maintenance time.
Lower maintenance costs over pump life.
Energy Efficiency
High-efficiency hydraulics reduce energy consumption.
Optimized performance across operating range.
Lower operating costs over decades of operation.
Compliance and Safety
Meets API 610 and international standards for process pumps.
Reduced emissions design meets environmental regulations.
Safe, reliable operation in high-temperature hydrocarbon services.
Peace of Mind
Plant management confidence in process unit reliability.
Operations team trust in equipment performance.
Maintenance team appreciation for serviceability and durability.
Refinery Services
Atmospheric tower bottoms
Vacuum tower bottoms
Fractionator bottoms
Hot oil circulation
Heavy gas oil transfer
LVGO and HVGO transfer
Reboiler circulation
Reactor feed
Petrochemical Services
High-temperature heat transfer fluids
Thermal cracking unit feed
Pyrolysis gasoline transfer
Aromatics processing
Industrial Processes
High-temperature water
Thermal oil systems
Process heater feed
High-temperature chemical transfer
Decades of proven performance in refineries and petrochemical plants worldwide for critical high-temperature services.
Engineering excellence – robust design with rigid shaft and centerline mounting for high-temperature reliability.
Broad performance range – wide hydraulic coverage for optimal fit to your specific requirements.
Custom engineered for your specific operating conditions (temperature, flow, head, NPSH available, fluid properties).
Global reference list – thousands of OH2 pumps operating reliably in high-temperature service.
Lifecycle support – genuine OEM parts, service, and engineering support for the entire pump life.
More Sulzer API 610 Pumps:
API 610 BB2 Low Pressure Charge Pump – Heavy-Duty Refinery Centrifugal Pump for Low Suction Pressure Charge Services
API 610 BB2 Fractionator Bottom Pump – Heavy-Duty Refinery Centrifugal Pump for FCC & Coker Fractionator Service
API 610 BB2 Vacuum Tower Bottom Pump – Heavy-Duty Refinery Centrifugal Pump for Severe Vacuum Residue Service
API 610 BB2 Atmospheric Tower Bottom Pump – Heavy-Duty Refinery Centrifugal Pump
API 610 BB2 Power Plant Circulation Pump ZE 800-900
API 610 BB2 Water Works Pump ZE 700-800
API 610 BB2 Seawater Intake Pump ZE 600-700
API 610 BB2 Cooling Water Circulation Pump ZE 500-600
API 610 BB2 Light Oil / Product Oil Transfer Pump ZE 450-550
API 610 BB2 Boiler Feed Water Pump ZE 400-500
API 610 BB2 Power Plant Circulation Pump GSG 800-900
API 610 BB2 Water Works Pump GSG 700-800
API 610 BB2 Seawater Intake Pump GSG 600-700
API 610 BB2 Cooling Water Circulation Pump GSG 500-600
API 610 BB2 Oil Transfer Pump GSG 450-550
API 610 BB2 Boiler Feed Water Pump GSG 400-500
API 610 OH2 Low-Flow High-Head Pump OHHL 25×20×160
API 610 OH2 Fractionator Bottom / Slurry Pump OHH 100×80×315
API 610 OH2 Tower Bottom / High Temperature Process Pump OHH 80×65×250
API 610 OH2 Light Hydrocarbon / Amine Circulation Pump OHH 65×50×225
API 610 OH2 Charge / Boiler Auxiliary Pump OHH 50×40×200
API 610 BB2 Cooling Water Pump for Power Plant BBS 24×30×42
API 610 BB2 Seawater Pump Sulzer BBS 20×24×36
API 610 BB2 Fractionator Bottom / SWRO High Pressure Pump BBS 18×22×33
API 610 BB2 Vacuum Tower Bottom / Critical Service Pump BBS 16×20×31
API 610 BB2 BBS 14×18×27L Atmospheric Tower Bottom Pump
Sulzer BBS 12×16×27K API 610 BB2 General Purpose Process Pump
Sulzer BBS 12×14×24 API 610 BB2 Boiler Feed Water Boosting Pump
Sulzer BBS 10×12×22 API 610 BB2 Low Pressure Charge Pump
Sulzer ZE 500-600 Axially Split Double-Suction Cooling Pump for Metallurgy and Mining Industrial Environments
Sulzer ZE 700-800 Axially Split Double-Suction Water Works Pump for Municipal Water Supply
Sulzer ZE 600-700 Axially Split Double-Suction Seawater Pump for Intake and Desalination Plants
Sulzer ZE 450-550 Axially Split Double-Suction Oil Transfer Pump for Light Oil, Diesel, and Solvent Services
Sulzer ZE 500-600 Axially Split Double-Suction Cooling Water Pump for Refinery and Petrochemical Utility Services
Sulzer ZE 400-500 Axially Split Double-Suction Boiler Feed Pump for Demineralized Water Transfer
Sulzer ZE 800-900 Large-Flow Axially Split Double-Suction Pump for Power Plant Cooling Water Circulation
Sulzer GSG 500-600 Double-Split Centrifugal Cooling Pump for Metallurgy and Mining Industrial Environments
Sulzer GSG 700-800 Double-Split Centrifugal Water Works Pump for Municipal Water Supply
Sulzer GSG 600-700 Double-Split Centrifugal Seawater Pump for Intake and Desalination Plants
Sulzer GSG 450-550 Double-Split Centrifugal Oil Transfer Pump for Refinery Light Oil, Diesel, and Solvent Services
Sulzer GSG 500-600 Double-Split Cooling Water Pump for Refinery and Petrochemical Utility Services
Sulzer GSG 400-500 High-Efficiency Double-Split Boiler Feed Water Pump for Demineralized Water Transfer
Sulzer GSG 800-900 Large-Flow Double-Split Centrifugal Pump for Power Plant Circulation Systems
Sulzer OHH 80×65×250 Heavy-Duty API 610 OH2 Coking Service Pump with Wear-Resistant Design for Coke Slurry
Sulzer OHH 100×80×315 Heavy-Duty API 610 OH2 Wear-Resistant Transfer Pump with SUME Coating for Abrasive Oil Sands Service
Sulzer OHHL 25×20×160 Low Flow High Head API 610 Pump with Unique Impeller-Diffuser Design
Sulzer OHH 50×40×200 API 610 OH2 Boiler Auxiliary Pump for Power Plant Deaerated Water and Boiler Feed Boosting
Sulzer OHH 100×80×315 API 610 OH2 Seawater Booster Pump for Desalination and Offshore Platforms
Sulzer OHH 100×80×315 Heavy-Duty API 610 OH2 Critical Service Pump for High-Temperature, High-Pressure Circulation
Sulzer OHH 65×50×225 API 610 OH2 Amine Circulation Pump for Desulfurization Systems
Sulzer OHH 80×65×250 API 610 OH2 High Temperature Process Pump for Corrosive Chemical Fluids
Sulzer OHH 80×65×250 API 610 OH2 Gas Oil Pump for LVGO/HVGO Transfer in Vacuum Units
Sulzer OHH 65×50×225 General-Purpose API 610 OH2 Process Pump for Light Hydrocarbon and Flammable Solvent Transfer
Sulzer OHH 50×40×200 Compact High-Efficiency API 610 OH2 Charge Pump for Low-Pressure Refinery Service
Sulzer OHH 100×80×315 Heavy-Duty API 610 OH2 Large-Flow Pump for Fractionator Bottom and Slurry Service
Sulzer OHH 80×65×250 API 610 OH2 Centerline-Mounted Overhung Pump for Atmospheric/Vacuum Tower Bottom Service
Sulzer BBS 14×18×27L Heavy-Duty API 610 Coke Grinding Pump for Particle-Laden Coking Plant Services