API 610 BB2 Amine / Carbonate Circulation Pump – Heavy-Duty Centrifugal Pump for Gas Treating and Acid Gas Removal Services
The API 610 Type BB2 Amine / Carbonate Circulation Pump is a radially split, double-suction, centerline-mounted centrifugal pump engineered specifically for continuous, reliable circulation of amine solutions (MEA, DEA, MDEA) and hot potassium carbonate in gas treating, sulfur recovery, and acid gas removal systems. Designed and manufactured to the latest API 610 (12th Edition) standards, this pump ensures maximum reliability, leak-free operation, and compliance with stringent safety and environmental requirements for handling corrosive, toxic service fluids.
Amine and carbonate circulation pumps operate in critical gas treating services where fluid properties and safety requirements demand exceptional reliability and materials expertise. Common challenges include:
Corrosive nature of amines and carbonates – can cause rapid degradation of standard materials.
Risk of stress corrosion cracking particularly with amine solutions exposed to wet CO2 and H2S.
Toxic fluid handling – amine solutions carry absorbed H2S, requiring absolute containment and zero leakage.
Low lubricity of amine solutions – can affect bearing and seal life.
Continuous 24/7 operation – any unplanned downtime shuts down gas treating and upstream production.
Potential for foaming and entrained gases affecting pump performance and stability.
Variable flow requirements depending on gas plant feed rates and treating demands.
Strict environmental and safety regulations for fugitive emissions and toxic fluid containment.
The API 610 BB2 design, with corrosion-resistant metallurgy and enhanced sealing systems, is the proven solution for these demanding amine and carbonate circulation applications.
1. Full Compliance with API 610 (Latest Edition)
Designed, manufactured, and tested per API 610 12th Edition (ISO 13709) – the global standard for refinery and gas plant critical service pumps.
Centerline-mounted casing ensures thermal stability and maintains alignment during temperature changes common in amine systems.
2. Corrosion-Resistant Metallurgy for Amine & Carbonate Service
Available in stainless steel (CF8M, CF3M, CF8C), duplex stainless steel, or high-nickel alloys specifically selected for amine and carbonate corrosion resistance.
Material selection based on NACE MR0175/ISO 15156 requirements for sour service where applicable.
Eliminates risk of stress corrosion cracking and generalized corrosion.
3. Enhanced Sealing Systems for Toxic Fluid Containment
Designed for API 682 mechanical seal arrangements with tandem seals and appropriate barrier fluid systems for toxic service.
Double mechanical seal configuration with pressurized barrier fluid ensures zero fugitive emissions.
Leak detection and alarm provisions for maximum safety.
Rigid shaft and minimal deflection extend mechanical seal life in low-lubricity amine solutions.
4. Double-Suction Impeller for Stable Hydraulic Performance
Double-suction impeller design minimizes axial thrust, extending bearing and seal life.
Excellent suction performance handles varying suction conditions from flash drums or surge tanks.
Smooth, low-vibration operation essential for mechanical seal reliability.
Hydraulically optimized for low-viscosity amine and carbonate solutions.
5. Rigid Shaft & Heavy-Duty Bearings
Shaft deflection kept far below API limits, providing stable environment for mechanical seals.
Large-capacity oil-lubricated bearings handle radial loads, ensuring decades of trouble-free operation.
6. Radially Split Casing (BB2) for Ease of Maintenance
Radial split design allows quick access to rotor without disturbing piping or driver.
Essential for amine service where piping is often stainless steel and difficult to modify.
Maintenance time reduced by over 50%, minimizing downtime during plant turnarounds.
7. Optimized for Continuous Circulation Service
Designed for reliable 24/7 operation in lean amine, rich amine, and carbonate circulation services.
Stable performance across varying flow rates and system pressures.
Handles entrained gases typical in rich amine systems without vapor locking.
8. Low NPSH Design for Flash Drum Service
Double-suction first-stage design dramatically lowers NPSHr, enabling reliable operation from amine flash drums with low available suction pressure.
Minimizes cavitation risk, protecting impeller and casing from damage.
9. Foaming Tolerance
Hydraulic design minimizes recirculation and turbulence that can exacerbate foaming in amine systems.
Smooth flow paths reduce gas breakout and foam generation.
10. Lowest Total Cost of Ownership
Corrosion-resistant materials eliminate premature failure and replacement.
High-efficiency hydraulics reduce energy consumption over years of continuous circulation.
Long service intervals and easy maintenance lower operating expenses.
Standardized API 610 components simplify spare parts inventory.
Reliable gas treating operation – prevent costly unplanned shutdowns that halt production.
Zero fugitive emissions – double seal systems with barrier fluid ensure toxic amine solutions are safely contained.
Extended equipment life – corrosion-resistant metallurgy prevents degradation from amines and carbonates.
Reduced maintenance – fewer seal failures and bearing issues mean less downtime and lower repair costs.
Energy savings – optimized hydraulic performance cuts electricity consumption.
Compliance & safety – meets NACE, API, and environmental regulations for sour gas and toxic service.
Peace of mind for plant engineers and operators, knowing critical circulation pumps are built for reliable, leak-free long-term service.
Lean amine circulation (MEA, DEA, MDEA)
Rich amine circulation
Semi-lean amine circulation
Hot potassium carbonate circulation (Benfield, Catacarb processes)
Gas sweetening units
Sulfur recovery unit (SRU) amine service
LNG plant amine treating
Refinery amine regenerator feed and circulation
Acid gas removal systems
Carbon capture and storage (CCS) amine circulation
Decades of experience in supplying pumps to gas plants, refineries, and LNG facilities worldwide for amine and carbonate circulation services.
Custom engineering – material selection and seal system design optimized for your specific amine concentration, temperature, and H2S/CO2 loading.
Proven field performance – thousands of units operating reliably in the most demanding amine circulation applications.
Global support – genuine OEM parts and service network ensure long-term pump health.
More Sulzer API 610 Pumps:
API 610 BB2 Low Pressure Charge Pump – Heavy-Duty Refinery Centrifugal Pump for Low Suction Pressure Charge Services
API 610 BB2 Fractionator Bottom Pump – Heavy-Duty Refinery Centrifugal Pump for FCC & Coker Fractionator Service
API 610 BB2 Vacuum Tower Bottom Pump – Heavy-Duty Refinery Centrifugal Pump for Severe Vacuum Residue Service
API 610 BB2 Atmospheric Tower Bottom Pump – Heavy-Duty Refinery Centrifugal Pump
API 610 BB2 Power Plant Circulation Pump ZE 800-900
API 610 BB2 Water Works Pump ZE 700-800
API 610 BB2 Seawater Intake Pump ZE 600-700
API 610 BB2 Cooling Water Circulation Pump ZE 500-600
API 610 BB2 Light Oil / Product Oil Transfer Pump ZE 450-550
API 610 BB2 Boiler Feed Water Pump ZE 400-500
API 610 BB2 Power Plant Circulation Pump GSG 800-900
API 610 BB2 Water Works Pump GSG 700-800
API 610 BB2 Seawater Intake Pump GSG 600-700
API 610 BB2 Cooling Water Circulation Pump GSG 500-600
API 610 BB2 Oil Transfer Pump GSG 450-550
API 610 BB2 Boiler Feed Water Pump GSG 400-500
API 610 OH2 Low-Flow High-Head Pump OHHL 25×20×160
API 610 OH2 Fractionator Bottom / Slurry Pump OHH 100×80×315
API 610 OH2 Tower Bottom / High Temperature Process Pump OHH 80×65×250
API 610 OH2 Light Hydrocarbon / Amine Circulation Pump OHH 65×50×225
API 610 OH2 Charge / Boiler Auxiliary Pump OHH 50×40×200
API 610 BB2 Cooling Water Pump for Power Plant BBS 24×30×42
API 610 BB2 Seawater Pump Sulzer BBS 20×24×36
API 610 BB2 Fractionator Bottom / SWRO High Pressure Pump BBS 18×22×33
API 610 BB2 Vacuum Tower Bottom / Critical Service Pump BBS 16×20×31
API 610 BB2 BBS 14×18×27L Atmospheric Tower Bottom Pump
Sulzer BBS 12×16×27K API 610 BB2 General Purpose Process Pump
Sulzer BBS 12×14×24 API 610 BB2 Boiler Feed Water Boosting Pump
Sulzer BBS 10×12×22 API 610 BB2 Low Pressure Charge Pump
Sulzer ZE 500-600 Axially Split Double-Suction Cooling Pump for Metallurgy and Mining Industrial Environments
Sulzer ZE 700-800 Axially Split Double-Suction Water Works Pump for Municipal Water Supply
Sulzer ZE 600-700 Axially Split Double-Suction Seawater Pump for Intake and Desalination Plants
Sulzer ZE 450-550 Axially Split Double-Suction Oil Transfer Pump for Light Oil, Diesel, and Solvent Services
Sulzer ZE 500-600 Axially Split Double-Suction Cooling Water Pump for Refinery and Petrochemical Utility Services
Sulzer ZE 400-500 Axially Split Double-Suction Boiler Feed Pump for Demineralized Water Transfer
Sulzer ZE 800-900 Large-Flow Axially Split Double-Suction Pump for Power Plant Cooling Water Circulation
Sulzer GSG 500-600 Double-Split Centrifugal Cooling Pump for Metallurgy and Mining Industrial Environments
Sulzer GSG 700-800 Double-Split Centrifugal Water Works Pump for Municipal Water Supply
Sulzer GSG 600-700 Double-Split Centrifugal Seawater Pump for Intake and Desalination Plants
Sulzer GSG 450-550 Double-Split Centrifugal Oil Transfer Pump for Refinery Light Oil, Diesel, and Solvent Services
Sulzer GSG 500-600 Double-Split Cooling Water Pump for Refinery and Petrochemical Utility Services
Sulzer GSG 400-500 High-Efficiency Double-Split Boiler Feed Water Pump for Demineralized Water Transfer
Sulzer GSG 800-900 Large-Flow Double-Split Centrifugal Pump for Power Plant Circulation Systems
Sulzer OHH 80×65×250 Heavy-Duty API 610 OH2 Coking Service Pump with Wear-Resistant Design for Coke Slurry
Sulzer OHH 100×80×315 Heavy-Duty API 610 OH2 Wear-Resistant Transfer Pump with SUME Coating for Abrasive Oil Sands Service
Sulzer OHHL 25×20×160 Low Flow High Head API 610 Pump with Unique Impeller-Diffuser Design
Sulzer OHH 50×40×200 API 610 OH2 Boiler Auxiliary Pump for Power Plant Deaerated Water and Boiler Feed Boosting
Sulzer OHH 100×80×315 API 610 OH2 Seawater Booster Pump for Desalination and Offshore Platforms
Sulzer OHH 100×80×315 Heavy-Duty API 610 OH2 Critical Service Pump for High-Temperature, High-Pressure Circulation
Sulzer OHH 65×50×225 API 610 OH2 Amine Circulation Pump for Desulfurization Systems
Sulzer OHH 80×65×250 API 610 OH2 High Temperature Process Pump for Corrosive Chemical Fluids
Sulzer OHH 80×65×250 API 610 OH2 Gas Oil Pump for LVGO/HVGO Transfer in Vacuum Units
Sulzer OHH 65×50×225 General-Purpose API 610 OH2 Process Pump for Light Hydrocarbon and Flammable Solvent Transfer
Sulzer OHH 50×40×200 Compact High-Efficiency API 610 OH2 Charge Pump for Low-Pressure Refinery Service
Sulzer OHH 100×80×315 Heavy-Duty API 610 OH2 Large-Flow Pump for Fractionator Bottom and Slurry Service
Sulzer OHH 80×65×250 API 610 OH2 Centerline-Mounted Overhung Pump for Atmospheric/Vacuum Tower Bottom Service
Sulzer BBS 14×18×27L Heavy-Duty API 610 Coke Grinding Pump for Particle-Laden Coking Plant Services