API 610 BB2 High Temperature Process Pump – Heavy-Duty Centrifugal Pump for High-Temperature Refinery Services
The API 610 Type BB2 High Temperature Process Pump is a radially split, double-suction, centerline-mounted centrifugal pump engineered specifically for severe high-temperature refinery services, including atmospheric tower bottoms, vacuum residue, fractionator bottoms, and hot oil circulation. Designed and manufactured to the latest API 610 (12th Edition) standards, this pump ensures maximum reliability, extended service life, and compliance with global refinery requirements for high-temperature hydrocarbon handling.
High temperature process pumps operate under some of the most demanding conditions in any refinery where thermal expansion, material strength, and continuous operation are critical. Common challenges include:
Extreme operating temperatures typically exceeding 350°C and often reaching 400°C or higher.
Thermal expansion causing misalignment, distortion, and seizure in conventionally designed pumps.
Reduced material strength at elevated temperatures requiring careful material selection and design.
Risk of thermal shock during start-up, shutdown, or process upsets.
Low available NPSH from towers operating at high temperatures near boiling conditions.
Entrained solids such as catalyst fines or coke particles in many high-temperature services.
Continuous critical operation where any unplanned downtime causes significant production losses.
The API 610 BB2 design, engineered specifically for high-temperature service, is the proven solution for these extreme conditions.
1. Full Compliance with API 610 (Latest Edition)
Designed, manufactured, and tested per API 610 12th Edition (ISO 13709) – the global standard for refinery high-temperature pumps.
Centerline-mounted casing is the critical feature for high-temperature service, ensuring thermal expansion remains concentric and maintaining alignment with driver and piping.
2. Centerline Mounting for Thermal Stability
Pump casing supported at the centerline, allowing uniform thermal expansion in all directions.
Maintains shaft alignment from cold start-up to full operating temperature.
Prevents distortion and binding of internal components during temperature changes.
Minimizes stress on driver and piping connections.
3. High-Temperature Material Selection
Available in chrome-moly alloys (such as ASTM A217 C5 or C12) specifically designed for high-temperature strength and creep resistance.
Optional stainless steel and high-alloy materials for corrosive high-temperature services.
Material certifications and traceability available for critical applications.
4. Engineered Thermal Growth Management
Controlled clearances accommodate thermal expansion without compromising performance.
Precision machining accounts for differential expansion between rotating and stationary components.
Optional water-cooled bearing housings for extreme temperature applications.
5. Double-Suction Impeller for Superior NPSH
Double-suction first-stage impeller dramatically lowers NPSHr, enabling reliable operation with high-temperature fluids near their vapor pressure.
Hydraulically balanced design cancels axial thrust, extending bearing and seal life.
Smooth, low-vibration operation essential for mechanical seal reliability at high temperatures.
6. Rigid Shaft & High-Temperature Bearing Systems
Shaft deflection kept far below API limits, providing stable environment for mechanical seals.
Heavy-duty bearings with optional cooling for sustained high-temperature operation.
Bearing housing designs accommodate thermal growth while maintaining precise rotor position.
7. High-Temperature Sealing Solutions
Designed for API 682 mechanical seal plans suitable for high-temperature hydrocarbons.
Optional quench, cooling, and flush plans to optimize seal environment.
Rigid shaft and minimal deflection extend mechanical seal life in severe service.
8. Radially Split Casing (BB2) for Maintenance Access
Radial split design allows quick access to rotor without disturbing piping or driver.
Essential for high-temperature pumps where piping cannot be easily disconnected due to thermal expansion stresses.
Maintenance time reduced by over 50% compared to other designs.
9. Wear-Resistant Design for Solids-Containing Services
Optional hardened materials and wear rings for services containing catalyst fines or coke particles.
Replaceable wear parts extend pump life in abrasive high-temperature applications.
10. Lowest Total Cost of Ownership
High-efficiency hydraulics reduce energy consumption despite high-temperature operation.
Long service intervals and easy maintenance lower operating expenses.
Standardized API 610 components simplify spare parts inventory.
Reliable high-temperature operation – maintain alignment and performance from cold start-up to full operating temperature.
Uninterrupted refinery operation – prevent costly unplanned shutdowns caused by pump failure.
Extended mechanical seal life – stable rotor dynamics and controlled thermal growth protect seals.
Reduced maintenance – centerline mounting prevents distortion-related failures; radial split casing enables quick repairs.
Energy savings – optimized hydraulic performance cuts electricity costs.
Compliance & safety – meets API and international standards for high-temperature hydrocarbon services.
Peace of mind for refinery engineers and operators, knowing critical high-temperature pumps are built for reliable long-term service.
Atmospheric tower bottoms (over 350°C)
Vacuum tower bottoms / vacuum residue
FCC and coker fractionator bottoms
Slurry oil / decanted oil
High-temperature hot oil circulation
Heat transfer fluid systems
Any refinery process requiring reliable pumping at temperatures above 300°C
Decades of experience in supplying high-temperature pumps to refineries worldwide for the most severe services.
Custom engineering – thermal growth analysis and FEA available to optimize performance for your specific operating temperature and conditions.
Proven field performance – thousands of units operating reliably at temperatures above 350°C.
Global support – genuine OEM parts and service network ensure long-term pump health.
More Sulzer API 610 Pumps:
API 610 BB2 Low Pressure Charge Pump – Heavy-Duty Refinery Centrifugal Pump for Low Suction Pressure Charge Services
API 610 BB2 Fractionator Bottom Pump – Heavy-Duty Refinery Centrifugal Pump for FCC & Coker Fractionator Service
API 610 BB2 Vacuum Tower Bottom Pump – Heavy-Duty Refinery Centrifugal Pump for Severe Vacuum Residue Service
API 610 BB2 Atmospheric Tower Bottom Pump – Heavy-Duty Refinery Centrifugal Pump
API 610 BB2 Power Plant Circulation Pump ZE 800-900
API 610 BB2 Water Works Pump ZE 700-800
API 610 BB2 Seawater Intake Pump ZE 600-700
API 610 BB2 Cooling Water Circulation Pump ZE 500-600
API 610 BB2 Light Oil / Product Oil Transfer Pump ZE 450-550
API 610 BB2 Boiler Feed Water Pump ZE 400-500
API 610 BB2 Power Plant Circulation Pump GSG 800-900
API 610 BB2 Water Works Pump GSG 700-800
API 610 BB2 Seawater Intake Pump GSG 600-700
API 610 BB2 Cooling Water Circulation Pump GSG 500-600
API 610 BB2 Oil Transfer Pump GSG 450-550
API 610 BB2 Boiler Feed Water Pump GSG 400-500
API 610 OH2 Low-Flow High-Head Pump OHHL 25×20×160
API 610 OH2 Fractionator Bottom / Slurry Pump OHH 100×80×315
API 610 OH2 Tower Bottom / High Temperature Process Pump OHH 80×65×250
API 610 OH2 Light Hydrocarbon / Amine Circulation Pump OHH 65×50×225
API 610 OH2 Charge / Boiler Auxiliary Pump OHH 50×40×200
API 610 BB2 Cooling Water Pump for Power Plant BBS 24×30×42
API 610 BB2 Seawater Pump Sulzer BBS 20×24×36
API 610 BB2 Fractionator Bottom / SWRO High Pressure Pump BBS 18×22×33
API 610 BB2 Vacuum Tower Bottom / Critical Service Pump BBS 16×20×31
API 610 BB2 BBS 14×18×27L Atmospheric Tower Bottom Pump
Sulzer BBS 12×16×27K API 610 BB2 General Purpose Process Pump
Sulzer BBS 12×14×24 API 610 BB2 Boiler Feed Water Boosting Pump
Sulzer BBS 10×12×22 API 610 BB2 Low Pressure Charge Pump
Sulzer ZE 500-600 Axially Split Double-Suction Cooling Pump for Metallurgy and Mining Industrial Environments
Sulzer ZE 700-800 Axially Split Double-Suction Water Works Pump for Municipal Water Supply
Sulzer ZE 600-700 Axially Split Double-Suction Seawater Pump for Intake and Desalination Plants
Sulzer ZE 450-550 Axially Split Double-Suction Oil Transfer Pump for Light Oil, Diesel, and Solvent Services
Sulzer ZE 500-600 Axially Split Double-Suction Cooling Water Pump for Refinery and Petrochemical Utility Services
Sulzer ZE 400-500 Axially Split Double-Suction Boiler Feed Pump for Demineralized Water Transfer
Sulzer ZE 800-900 Large-Flow Axially Split Double-Suction Pump for Power Plant Cooling Water Circulation
Sulzer GSG 500-600 Double-Split Centrifugal Cooling Pump for Metallurgy and Mining Industrial Environments
Sulzer GSG 700-800 Double-Split Centrifugal Water Works Pump for Municipal Water Supply
Sulzer GSG 600-700 Double-Split Centrifugal Seawater Pump for Intake and Desalination Plants
Sulzer GSG 450-550 Double-Split Centrifugal Oil Transfer Pump for Refinery Light Oil, Diesel, and Solvent Services
Sulzer GSG 500-600 Double-Split Cooling Water Pump for Refinery and Petrochemical Utility Services
Sulzer GSG 400-500 High-Efficiency Double-Split Boiler Feed Water Pump for Demineralized Water Transfer
Sulzer GSG 800-900 Large-Flow Double-Split Centrifugal Pump for Power Plant Circulation Systems
Sulzer OHH 80×65×250 Heavy-Duty API 610 OH2 Coking Service Pump with Wear-Resistant Design for Coke Slurry
Sulzer OHH 100×80×315 Heavy-Duty API 610 OH2 Wear-Resistant Transfer Pump with SUME Coating for Abrasive Oil Sands Service
Sulzer OHHL 25×20×160 Low Flow High Head API 610 Pump with Unique Impeller-Diffuser Design
Sulzer OHH 50×40×200 API 610 OH2 Boiler Auxiliary Pump for Power Plant Deaerated Water and Boiler Feed Boosting
Sulzer OHH 100×80×315 API 610 OH2 Seawater Booster Pump for Desalination and Offshore Platforms
Sulzer OHH 100×80×315 Heavy-Duty API 610 OH2 Critical Service Pump for High-Temperature, High-Pressure Circulation
Sulzer OHH 65×50×225 API 610 OH2 Amine Circulation Pump for Desulfurization Systems
Sulzer OHH 80×65×250 API 610 OH2 High Temperature Process Pump for Corrosive Chemical Fluids
Sulzer OHH 80×65×250 API 610 OH2 Gas Oil Pump for LVGO/HVGO Transfer in Vacuum Units
Sulzer OHH 65×50×225 General-Purpose API 610 OH2 Process Pump for Light Hydrocarbon and Flammable Solvent Transfer
Sulzer OHH 50×40×200 Compact High-Efficiency API 610 OH2 Charge Pump for Low-Pressure Refinery Service
Sulzer OHH 100×80×315 Heavy-Duty API 610 OH2 Large-Flow Pump for Fractionator Bottom and Slurry Service
Sulzer OHH 80×65×250 API 610 OH2 Centerline-Mounted Overhung Pump for Atmospheric/Vacuum Tower Bottom Service
Sulzer BBS 14×18×27L Heavy-Duty API 610 Coke Grinding Pump for Particle-Laden Coking Plant Services