API 610 BB2 SWRO High Pressure Boosting Pump – Heavy-Duty Centrifugal Pump for Seawater Reverse Osmosis Membrane Feed Services

2026-02-26 13:40

API 610 BB2 SWRO High Pressure Boosting Pump – Heavy-Duty Centrifugal Pump for Seawater Reverse Osmosis Membrane Feed Services


Product Overview

The API 610 Type BB2 SWRO High Pressure Boosting Pump is a radially split, double-suction, centerline-mounted centrifugal pump engineered specifically for continuous, high-pressure membrane feed service in Seawater Reverse Osmosis (SWRO) desalination plants. Designed and manufactured to the latest API 610 (12th Edition) standards, this pump ensures maximum reliability, exceptional efficiency, and long-term corrosion resistance for the most critical pumping stage in the desalination process – delivering pretreated seawater to the RO membranes at pressures required for permeate production.


Why You Need This Pump ?

SWRO high pressure boosting pumps operate at the heart of the desalination process, where reliability directly impacts freshwater production and plant economics. Common challenges include:

  • Extremely high discharge pressures required to overcome osmotic pressure and drive seawater through RO membranes.

  • Highly corrosive seawater environment – standard materials fail rapidly due to chloride-induced pitting and crevice corrosion.

  • Continuous 24/7 operation – any unplanned downtime stops freshwater production, impacting water supply contracts and revenue.

  • High energy consumption – the SWRO high pressure pump is the largest energy consumer in the desalination plant, typically accounting for 60-70% of total energy usage.

  • Low available NPSH from pretreatment and feed systems.

  • Integration with energy recovery devices (ERD) – requires stable operation with varying flow and pressure conditions.

  • Strict water quality requirements – pump materials must not contaminate the product water.

  • Long-term reliability demands – desalination plants require minimum 20-25 year service life.

The API 610 BB2 SWRO High Pressure Boosting Pump, with its heavy-duty construction, corrosion-resistant materials, and high-efficiency hydraulics, is the proven solution for these demanding desalination applications.


Key Advantages

1. Full Compliance with API 610 (12th Edition) – The Desalination Industry Gold Standard

  • Designed, manufactured, and tested to the most stringent requirements of API 610 12th Edition (ISO 13709).

  • Exceeds minimum API requirements with additional design margins for critical SWRO service.

  • Full documentation and traceability for all critical components.

2. Superior Corrosion-Resistant Metallurgy for Seawater Service

  • Available in super duplex stainless steel (ASTM A890 Grade 5A, PREN ≥ 40) specifically selected for maximum resistance to chloride pitting and crevice corrosion in seawater.

  • Optional high-nickel alloys for extreme conditions.

  • Material selection based on proven performance in decades of desalination service worldwide.

  • Eliminates risk of stress corrosion cracking and generalized corrosion in aggressive seawater environments.

3. Centerline-Mounted Casing for Thermal and Pressure Stability

  • Pump casing supported at the centerline ensures uniform expansion under pressure and temperature variations.

  • Maintains perfect alignment from start-up to full operating conditions.

  • Prevents distortion, binding, and seal face separation during operation.

4. High-Pressure Casing Design

  • Casing designed for pressures up to 100 bar (1,450 psi) or higher as required for SWRO membrane feed applications.

  • Robust construction withstands severe pressure pulsations and system transients.

  • Designed for 2 times API 610 nozzle loads, ensuring freedom from piping distortions.

5. Double-Suction Impeller for Superior Hydraulic Performance

  • Double-suction first-stage impeller dramatically lowers NPSHr, enabling reliable operation with low available suction pressure from pretreatment systems.

  • Hydraulically balanced design eliminates axial thrust, extending bearing and seal life indefinitely.

  • Optimized hydraulics for maximum efficiency – critical for reducing energy consumption in SWRO plants.

  • Impeller dynamically balanced to assure vibration-free operation as per API/ISO requirements.

6. Double-Volute Casing Design

  • Double-volute design minimizes hydraulic radial forces across the entire operating range down to minimum flow.

  • Reduces shaft deflection and increases life of bearings, seals, and wear rings.

  • Ensures stable operation even during start-up, shutdown, and off-design conditions.

7. Rigid Shaft & Heavy-Duty Rotor Dynamics

  • Heavy-duty shaft design ensures trouble-free performance by operating below first critical speed.

  • Large diameter and short bearing span minimize deflection.

  • First critical speed is well above operating speed range for smooth operation.

  • Extends mechanical seal and bearing life to maximum achievable duration.

8. High-Efficiency Hydraulic Design

  • Optimized hydraulics provide the best hydraulic fit to maximize operating efficiency.

  • Higher efficiency directly translates to lower energy consumption – the single largest operating cost in SWRO plants.

  • Renewable wear rings maintain hydraulic stability and high-efficiency operation over decades of service.

9. Enhanced Mechanical Seal Environment

  • Generously sized seal chambers ensure sufficient liquid around seal faces for optimal flushing and cooling.

  • Rigid shaft and minimal deflection provide ideal conditions for mechanical seal reliability.

  • Accepts single, double, or tandem cartridge-type mechanical seal designs per API 682.

  • Optional seal flush plans for seawater service.

10. Radially Split Casing (BB2) for Maintenance Access

  • Radial split design allows quick access to rotor without disturbing piping or driver.

  • Essential for SWRO service where piping is often super duplex stainless steel and difficult to modify.

  • Reduces maintenance time and minimizes plant downtime.

11. Compatibility with Variable Frequency Drives (VFD)

  • Designed for variable speed operation to optimize plant performance and energy recovery integration.

  • Rotor dynamics validated across full speed range.

  • Smooth operation from minimum to maximum flow conditions.

12. Energy Recovery Device (ERD) Integration Ready

  • Designed to operate seamlessly with Pelton turbines, pressure exchangers, and other energy recovery devices.

  • Stable performance under varying flow conditions typical of ERD-equipped systems.

  • Contributes to overall plant energy efficiency below 3 kWh/m³.

13. Longest Life Cycle Design

  • Conservative stress levels in all pressure-containing components.

  • Generous corrosion allowances for 20-25 year design life.

  • Designed for minimum 20 years service life in SWRO critical service.

14. Lowest Total Cost of Ownership

  • Highest efficiency reduces energy consumption – the dominant operating cost in desalination.

  • Long service intervals and easy maintenance lower operating expenses.

  • Corrosion-resistant materials eliminate premature failure and replacement.

  • Standardized API 610 components simplify spare parts inventory.


Customer Value

Operational Reliability

  • Maximum meantime between failures (MTBF) in the plant's most critical pumping service.

  • Eliminates unplanned shutdowns that stop freshwater production.

  • Confidence that pumps will run reliably until next scheduled plant maintenance.

Energy Efficiency

  • Highest hydraulic efficiency reduces energy consumption – typically saving millions in electricity costs over pump life.

  • Contributes to achieving plant energy targets below 3 kWh/m³.

  • Lower carbon footprint for sustainable water production.

Corrosion Protection

  • Super duplex stainless steel construction ensures 20-25 year service life in aggressive seawater.

  • Eliminates risk of premature failure due to chloride pitting or crevice corrosion.

  • Maintains material integrity and product water quality.

Economic Protection

  • Prevents multi-million dollar revenue losses from unplanned outages.

  • Lowest lifecycle cost through energy savings and reduced maintenance.

  • Protects plant investment with longest available service life.

Water Quality Assurance

  • Corrosion-resistant materials prevent contamination of product water.

  • Meets strict water quality standards for potable water production.

  • No risk of iron or other metal pickup from pump degradation.

Peace of Mind

  • Plant management confidence in water production reliability.

  • Operations team trust in equipment performance.

  • Maintenance team appreciation for serviceability and predictability.


Typical Applications

SWRO Desalination Plant Services

  • SWRO high pressure membrane feed pumps

  • RO island high pressure pumps

  • Seawater reverse osmosis booster pumps

  • Energy recovery device (ERD) booster pumps

  • Membrane feed for brackish water RO

Other Desalination-Related Services

  • Brine re-injection pumps

  • Seawater treatment feed pumps

  • High-pressure seawater transfer

Industrial High-Pressure Water Services

  • High-pressure water injection

  • Pipeline booster services

  • Desalination for power generation and industrial users


Why Choose Our API 610 BB2 SWRO High Pressure Boosting Pump?

  • Decades of proven performance in the world's largest and most successful SWRO desalination plants.

  • Super duplex metallurgy expertise – proper material selection and handling for maximum corrosion resistance.

  • High-efficiency hydraulic design – optimized for minimum energy consumption in desalination service.

  • Custom engineered for your specific plant requirements (flow, pressure, site conditions).

  • Global reference list – thousands of SWRO high pressure pumps operating reliably for decades.

  • Lifecycle support – genuine OEM parts, service, and engineering support for the entire pump life.


More Sulzer API 610 Pumps:

API 610 BB2 Low Pressure Charge Pump – Heavy-Duty Refinery Centrifugal Pump for Low Suction Pressure Charge Services
API 610 BB2 Fractionator Bottom Pump – Heavy-Duty Refinery Centrifugal Pump for FCC & Coker Fractionator Service
API 610 BB2 Vacuum Tower Bottom Pump – Heavy-Duty Refinery Centrifugal Pump for Severe Vacuum Residue Service
API 610 BB2 Atmospheric Tower Bottom Pump – Heavy-Duty Refinery Centrifugal Pump
API 610 BB2 Power Plant Circulation Pump ZE 800-900
API 610 BB2 Water Works Pump ZE 700-800
API 610 BB2 Seawater Intake Pump ZE 600-700
API 610 BB2 Cooling Water Circulation Pump ZE 500-600
API 610 BB2 Light Oil / Product Oil Transfer Pump ZE 450-550
API 610 BB2 Boiler Feed Water Pump ZE 400-500
API 610 BB2 Power Plant Circulation Pump GSG 800-900
API 610 BB2 Water Works Pump GSG 700-800
API 610 BB2 Seawater Intake Pump GSG 600-700
API 610 BB2 Cooling Water Circulation Pump GSG 500-600
API 610 BB2 Oil Transfer Pump GSG 450-550
API 610 BB2 Boiler Feed Water Pump GSG 400-500
API 610 OH2 Low-Flow High-Head Pump OHHL 25×20×160
API 610 OH2 Fractionator Bottom / Slurry Pump OHH 100×80×315
API 610 OH2 Tower Bottom / High Temperature Process Pump OHH 80×65×250
API 610 OH2 Light Hydrocarbon / Amine Circulation Pump OHH 65×50×225
API 610 OH2 Charge / Boiler Auxiliary Pump OHH 50×40×200
API 610 BB2 Cooling Water Pump for Power Plant BBS 24×30×42
API 610 BB2 Seawater Pump Sulzer BBS 20×24×36
API 610 BB2 Fractionator Bottom / SWRO High Pressure Pump BBS 18×22×33
API 610 BB2 Vacuum Tower Bottom / Critical Service Pump BBS 16×20×31
API 610 BB2 BBS 14×18×27L Atmospheric Tower Bottom Pump
Sulzer BBS 12×16×27K API 610 BB2 General Purpose Process Pump
Sulzer BBS 12×14×24 API 610 BB2 Boiler Feed Water Boosting Pump
Sulzer BBS 10×12×22 API 610 BB2 Low Pressure Charge Pump
Sulzer ZE 500-600 Axially Split Double-Suction Cooling Pump for Metallurgy and Mining Industrial Environments
Sulzer ZE 700-800 Axially Split Double-Suction Water Works Pump for Municipal Water Supply
Sulzer ZE 600-700 Axially Split Double-Suction Seawater Pump for Intake and Desalination Plants
Sulzer ZE 450-550 Axially Split Double-Suction Oil Transfer Pump for Light Oil, Diesel, and Solvent Services
Sulzer ZE 500-600 Axially Split Double-Suction Cooling Water Pump for Refinery and Petrochemical Utility Services
Sulzer ZE 400-500 Axially Split Double-Suction Boiler Feed Pump for Demineralized Water Transfer
Sulzer ZE 800-900 Large-Flow Axially Split Double-Suction Pump for Power Plant Cooling Water Circulation
Sulzer GSG 500-600 Double-Split Centrifugal Cooling Pump for Metallurgy and Mining Industrial Environments
Sulzer GSG 700-800 Double-Split Centrifugal Water Works Pump for Municipal Water Supply
Sulzer GSG 600-700 Double-Split Centrifugal Seawater Pump for Intake and Desalination Plants
Sulzer GSG 450-550 Double-Split Centrifugal Oil Transfer Pump for Refinery Light Oil, Diesel, and Solvent Services
Sulzer GSG 500-600 Double-Split Cooling Water Pump for Refinery and Petrochemical Utility Services
Sulzer GSG 400-500 High-Efficiency Double-Split Boiler Feed Water Pump for Demineralized Water Transfer
Sulzer GSG 800-900 Large-Flow Double-Split Centrifugal Pump for Power Plant Circulation Systems
Sulzer OHH 80×65×250 Heavy-Duty API 610 OH2 Coking Service Pump with Wear-Resistant Design for Coke Slurry
Sulzer OHH 100×80×315 Heavy-Duty API 610 OH2 Wear-Resistant Transfer Pump with SUME Coating for Abrasive Oil Sands Service
Sulzer OHHL 25×20×160 Low Flow High Head API 610 Pump with Unique Impeller-Diffuser Design
Sulzer OHH 50×40×200 API 610 OH2 Boiler Auxiliary Pump for Power Plant Deaerated Water and Boiler Feed Boosting
Sulzer OHH 100×80×315 API 610 OH2 Seawater Booster Pump for Desalination and Offshore Platforms
Sulzer OHH 100×80×315 Heavy-Duty API 610 OH2 Critical Service Pump for High-Temperature, High-Pressure Circulation
Sulzer OHH 65×50×225 API 610 OH2 Amine Circulation Pump for Desulfurization Systems
Sulzer OHH 80×65×250 API 610 OH2 High Temperature Process Pump for Corrosive Chemical Fluids
Sulzer OHH 80×65×250 API 610 OH2 Gas Oil Pump for LVGO/HVGO Transfer in Vacuum Units
Sulzer OHH 65×50×225 General-Purpose API 610 OH2 Process Pump for Light Hydrocarbon and Flammable Solvent Transfer
Sulzer OHH 50×40×200 Compact High-Efficiency API 610 OH2 Charge Pump for Low-Pressure Refinery Service
Sulzer OHH 100×80×315 Heavy-Duty API 610 OH2 Large-Flow Pump for Fractionator Bottom and Slurry Service
Sulzer OHH 80×65×250 API 610 OH2 Centerline-Mounted Overhung Pump for Atmospheric/Vacuum Tower Bottom Service
Sulzer BBS 14×18×27L Heavy-Duty API 610 Coke Grinding Pump for Particle-Laden Coking Plant Services


Name:
Message:
Verification code:
Submit
Comment