KSB’s Omega, RDLO, and RDLP are axially split, single‑stage or multi‑stage volute casing pumps featuring double‑entry radial impellers. Engineered for continuous duty in waterworks, desalination, power generation, irrigation, district energy, fire protection, and marine applications, these pumps deliver high flow rates, high heads, exceptional reliability, and low life cycle costs. With more than 140 years of hydraulic expertise, KSB offers the broadest hydraulic selection chart in the industry – ensuring an optimally matched pump for every operating range, from standardized high‑performers to fully customized engineered solutions.
Double‑Suction Impeller – Hydraulically balanced; eliminates axial thrust, reduces bearing loads, and extends component life.
Double‑Volute Casing – Balances radial forces; ensures extremely low vibration and smooth operation across the entire flow range.
Axially Split Design – Self‑centring upper casing half enables fast, tool‑free assembly; full internal access for easy inspection and maintenance.
Rigid Shaft & Heavy‑Duty Bearings – Minimises deflection; L10 bearing life ≥ 100,000 hours; spring‑loaded rotor requires no field adjustment.
Solid Split Flange – Minimum 80 mm flange thickness (RDLO/RDLP) guarantees reliable, leak‑tight sealing even under high pressure.
Corrosion & Abrasion Resistant Materials – Wide choice of bronze, stainless steel, duplex / super duplex for wear rings, shaft sleeves, impellers and casings.
Energy Efficient – Hydraulics optimised for high speeds; reduces energy consumption and CO₂ emissions.
Flexible Installation – Horizontal or vertical mounting; common baseplate, separate baseplates, motor stool, or split‑level configurations.
Global Reference Projects – Proven in world‑class installations: Burj Khalifa (Dubai), Nepean Dam (Australia), Mekhe (Senegal), Ravenswood (Australia), Mambu Branco (Brazil), and many more.
Description
Single‑stage, axially split volute casing pump for horizontal or vertical installation. Double‑entry radial impeller. Flanges to DIN, ISO, BS or ANSI.
Technical Data
DN: 80 – 350 mm (3 – 14 in)
Flow (Q): ≤ 2,880 m³/h (12,680 US gpm)
Head (H): ≤ 210 m (689 ft)
Pressure (p): ≤ 25 bar (363 psi)
Temperature (T): ≤ 140 °C (284 °F)
Frequency: 50 / 60 Hz (2‑pole max.)
Applications
Raw water, clean water, service water, seawater – water treatment, irrigation, drainage, power stations, fire‑fighting, shipbuilding.
Description
Single‑stage, axially split volute casing pump for horizontal or vertical installation. Double‑entry radial impeller. Flanges to DIN, ISO, BS or ANSI. Higher flow rates and heads available on request.
Technical Data
DN: 350 – 700 mm (14 – 28 in)
Flow (Q): ≤ 10,000 m³/h (44,030 US gpm) * (higher on request)
Head (H): ≤ 290 m (951 ft) * (higher on request)
Pressure (p): ≤ 30 bar (435 psi)
Temperature (T): ≤ 140 °C (284 °F)
Frequency: 50 / 60 Hz (4‑pole max.)
Bearing Life: L10 ≥ 100,000 hours
Split Flange Thickness: ≥ 80 mm
Applications
Waterworks, desalination, pressure boosting, long‑distance water transport, cooling water (power/industry), large irrigation schemes, drainage, district heating/cooling, fire‑fighting, offshore.
Description
Multi‑stage (1, 2 or 3 stages) axially split volute casing pump for horizontal installation. Double‑entry radial impeller per stage. Flanges to DIN, ISO, BS or ANSI. Materials to DIN or ASTM in any required combination. Fully customised to site conditions.
Technical Data
DN: 350 – 1,200 mm (14 – 48 in)
Flow (Q): ≤ 18,000 m³/h (79,260 US gpm) * (higher on request)
Head (H): ≤ 550 m (1,804 ft) * (higher on request)
Pressure (p): ≤ 70 bar (1,015 psi)
Temperature (T): ≤ 80 °C (176 °F) * (higher on request)
Frequency: 50 / 60 Hz (4‑pole max.)
Applications
Bulk raw water transfer, seawater intake / outfall, high‑head desalination feed, large‑scale irrigation, long‑distance pipelines, high‑pressure industrial water supply.
| Sector | Specific Uses |
|---|---|
| Water Utilities | Raw water extraction, treated water transport, desalination plants (SWRO), pressure boosting |
| Power Generation | Cooling water circulation, service water, condenser cooling, auxiliary systems |
| Industry | Process water, cooling circuits, utility water, fire water |
| Agriculture | Large‑scale irrigation, drainage pumping stations |
| District Energy | District heating (up to 140 °C), district cooling (chilled water) |
| Fire Protection | Fixed deluge, sprinkler, hydrant systems |
| Marine & Offshore | Ballast, bilge, cooling water, fire‑fighting, general service |
| Infrastructure | Long‑distance water supply, flood control, land drainage |
3D CAD / FEM / CFD – All components designed in 3D, validated by finite element analysis (stress, vibration) and computational fluid dynamics (hydraulic optimisation).
In‑House Test Beds – Full‑speed, full‑load testing up to 10 MW; closed loop for precise suction pressure control; frequency inverter for customer‑supplied motors; 24/7 operation capability.
Global Manufacturing – State‑of‑the‑art welding, machining, assembly, and quality control – all from a single source.