The KSB Estigia is a vertical, single-stage, medium-duty sump pump conforming to ISO 5199 and Type VS4 (vertical, column pipe, separate discharge). It combines the proven technology of the KSB MegaCPK industrial pump with the robust design of the KSB Amarex KRT submersible wastewater pump series. With three impeller geometries, flexible lubrication options, and a wide choice of materials, the Estigia handles clean liquids, moderately solids‑laden fluids, and fibrous or gas‑entrained media across the automotive, chemical, petrochemical, paper, food, mining, and water treatment industries.
Three Impeller Types for Maximum Flexibility:
Closed impeller – for clean liquids and high efficiency
Multi‑channel impeller (K) – for fluids with moderate solids content
Vortex impeller (F) – for fluids containing fibres, long solids, or entrapped air/gas
Robust Pump‑Side Plain Bearings – SiC/SiC (silicon carbide) bearings offer low wear and high reliability; lubrication options:
By the fluid handled
External fluid injection
External grease supply
Integral Thrust Bearings – Grease‑packed, sealed‑for‑life bearings with minimum 17,500 h rated lifetime (ISO 5199); motor bearings are not loaded by pump forces.
Flexible Seal Arrangements – Standard lip seal; optional single or double cartridge mechanical seals, including API 682 Category 1 configurations.
Optimised Discharge Piping – Three different discharge pipe diameters per pump size enable:
Reduced head losses for energy efficiency
Higher flow speeds to avoid clogging in solids‑handling duties
Easy Installation – Soleplate available in rectangular or circular design, drilled to DIN or ASME standards; adaptable to site conditions.
Wide Material Selection:
Casing in grey cast iron with impeller in stainless steel, duplex, or white iron
Full stainless steel construction
Full duplex construction for corrosive duties
| Parameter | 50 Hz | 60 Hz |
|---|---|---|
| Max. Flow Rate | 1,160 m³/h (5,107 US gpm) | 1,450 m³/h (6,384 US gpm) |
| Max. Head | 110 m (361 ft) | 110 m (361 ft) |
| Max. Pressure | 16 bar (232 psi) | 16 bar (232 psi) |
| Fluid Temperature | -30 °C to +100 °C (-22 °F to +212 °F) | -30 °C to +100 °C |
| Max. Immersion Depth | 6 m (20 ft) | 6 m (20 ft) |
| Pump Type | Vertical, single‑stage, VS4 (column pipe, separate discharge) | |
| Design Standard | ISO 5199, combining MegaCPK and Amarex KRT technologies |
Higher flow rates, heads, pressures, and immersion depths available on request.
Automotive industry – Process water, coolants, wastewater
Iron & steel industry – Scale pit water, cooling water
Marine applications – Bilge, ballast, cooling water
Food industry – Wash water, vegetable/fruit transport water
Paper industry – Pulp suspensions, white water
Chemical & petrochemical – Aggressive and solids‑bearing fluids
Water treatment – Effluent transfer, stormwater, sludge water
Surface treatment / paint booths – Wash water, paint sludge
Air‑conditioning systems – Condensate, cooling water
Washing plants – Industrial parts washers
Energy generating plants – Cooling water, ash handling
Mining – Mine dewatering, slurry transfer