Product Name: GIW® HVF – High Volume Froth Pump for Air Entrained Slurries
Product Overview:
The GIW® HVF (High Volume Froth) is a heavy-duty centrifugal slurry pump specifically engineered to handle air-entrained froth slurries in mining and mineral processing. Developed by GIW Industries (a KSB company), the HVF features an innovative deaeration chamber and vented impeller that continuously remove air from the pump eye during operation – eliminating the need for shutdowns, chemical defoamers, or water addition. With flow rates up to 7,200 m³/h (31,700 gpm) and heads up to 50 m (165 ft), the HVF is the most cost-effective and environmentally friendly solution for oil sands, hard rock mining, and mineral froth processes.
Key Features & Benefits:
Patented Deaeration Technology
Integrated deaeration chamber actively removes air from the slurry before it enters the impeller.
Maintains continuous operation – no stoppages for air binding, no operator intervention required.
Reduces product losses and eliminates the need for water addition to break froth.
Vented Impeller Design
Specially designed impeller with venting features allows air to escape from the impeller eye.
Prevents air locking and ensures stable hydraulic performance even with extremely high air content.
Retrofit Flexibility – Lowers Capital Costs
Interchangeable with existing froth pump installations – can be retrofitted into any froth application.
Fewer pumps required for the same duty – reduces capital expense, power consumption, and maintenance.
Standard ANSI suction/discharge sizes (from 6” to 24”) enable direct replacement.
Robust & Reliable Construction
Designed for the harshest slurry duties – oil sands, hard rock, and abrasive mineral slurries.
Heavy-duty wet-end components ensure long wear life.
Pressure rating up to 11 bar (165 psi) .
Environmental & Cost Benefits
Eliminates chemical defoamers – greener process.
Reduces water usage – no need to add water for froth control.
Lower power consumption per ton of solids pumped.
Technical Parameters:
| Parameter | Value |
|---|---|
| Discharge sizes | 100 mm to 450 mm (ANSI 4” to 20”) |
| Suction sizes | ANSI 6” to 24” |
| Flow rate (Q) | Up to 7,200 m³/h (31,700 gpm) |
| Total head (H) | Up to 50 m (165 ft) |
| Pressure rating | Up to 11 bar (165 psi) |
| Applications | Oil sands, hard rock mining, mineral froth processes |
Model Dimensions (Examples):
| Model | Suction (ANSI) | Discharge (ANSI) | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) |
|---|---|---|---|---|---|---|---|
| 18 x 24 | 24” | 20” | 2834 | 1230 | 544 | 1425 | 1550 |
| 12 x 16 | 16” | 12” | 1834 | 696 | 422 | 725 | 800 |
| 8 x 12 | 12” | 8” | 1632 | 696 | 333 | 725 | 800 |
| 6 x 8 | 8” | 6” | 1093 | 496 | 181 | 480 | 530 |
Typical Applications:
Oil sands – froth treatment, primary separation, tailings
Hard rock mining – flotation circuits, froth pumping
Mineral processing – phosphate, potash, copper, nickel, zinc froth
Industrial processes – any application handling air-entrained slurries with tendency to foam
Why Choose GIW® HVF?
Conventional centrifugal pumps fail when pumping aerated froth – they air-bind, lose prime, and require constant attention. The GIW HVF is purpose-built to solve this problem. Its patented deaeration chamber and vented impeller keep the pump fully primed and running continuously, even with entrained air levels exceeding 15% . By retrofitting directly into existing froth pump stations, the HVF delivers immediate improvements in uptime, recovery, and operating cost. Backed by GIW’s 100+ years of slurry expertise and KSB’s global service network, the HVF is the definitive solution for high-volume froth pumping.
#GIW #HVF #FrothPump #SlurryPump #AirEntrainedSlurry #OilSands #Mining #MineralProcessing #Deaeration #VentedImpeller #RetrofitPump #HighVolumePump #KSB #SlurryHandling #ProcessOptimization