KSB GIW® LCC Pump Series – Wear‑Resistant, High‑Performance Slurry Pumps

2026-02-12 15:57

Product Name: GIW® LCC Pump Series – Wear‑Resistant, High‑Performance Slurry Pumps

Product Overview:
The GIW® LCC Pump Series is a comprehensive family of heavy‑duty horizontal slurry pumps engineered to withstand the most abrasive and corrosive slurry applications in the world. Featuring advanced metallurgy, proprietary Gasite® wear materials, and multiple configuration options – including hard metal, rubber lined, extra heavy, and high pressure variants – the LCC series delivers superior wear life, sustained hydraulic efficiency, and lowest total cost of ownership. With flow capabilities up to 3,200 m³/h (14,100 gpm) and heads up to 90 m (300 ft), the LCC is the preferred solution for mining, mineral processing, dredging, and industrial slurry handling.

Key Features & Benefits:

Exceptional Wear Resistance

  • Wet‑end components (shell, impeller, suction plate/liner) available in GIW‘s proprietary Gasite® high‑chromium alloy – globally recognized for superior abrasion resistance.

  • Rubber lined versions with precision‑molded, bolt‑in liners – ideal for fine particle slurries and corrosion/erosion balance.

  • Extra heavy hard metal construction with thicker sections for extreme duties.

  • Optional materials: polyurethane, duplex stainless steels, and specialty alloys for chemical service.

Advanced Hydraulic Design

  • Twisted three‑vane impeller (metal or rubber) – optimizes efficiency and reduces NPSH requirements.

  • CAD‑engineered casing and replaceable suction liner – maintains peak performance over lifetime.

  • Maximum sphere passage – handles coarse solids without clogging.

Rugged Mechanical Construction

  • Cartridge bearing assembly – CNC‑machined cast iron housing, double‑row tapered roller bearings for combined radial/thrust loads.

  • INPRO® bearing isolators as standard – permanent protection against contamination.

  • Integrated impeller gap adjustment screw – enables quick restoration of hydraulic clearance.

  • Two pedestal sizes cover the entire LCC range – simplifies stocking and maintenance.

Flexible Seal Arrangements

  1. Mechanical Seal – for processes where gland water cannot be added; dry design, back flush, and double seal options available.

  2. Stuffing Box – standard KE design with lantern ring and packing; throttle bushing for special applications.

  3. Expeller Seal – dynamic seal eliminates dilution water, achieves zero leakage; exclusive internal diverter boosts efficiency.

Easy Maintenance & Interchangeability

  • Three‑piece wet end (shell, impeller, suction liner) – quick disassembly without disturbing piping.

  • Interchangeable components across multiple pump sizes – reduces spare parts inventory.

  • Self‑aligning concentric bearing supports – simplifies installation and alignment.

Technical Parameters:

ParameterValue
Discharge sizes50 – 300 mm (2 – 12 in)
High Pressure: 50 – 200 mm (2 – 8 in)
Flow rate (Q)Up to 3,200 m³/h (14,100 gpm)
Total head (H)Up to 90 m (300 ft)
Power ratingUp to 560 kW (750 hp)
Temperature limitUp to +120 °C (248 °F)
Pressure rating – StandardUp to 16 bar (230 psi) – 2‑stage capable
Pressure rating – High PressureUp to 24 bar (350 psig) – 3‑stage capable
MaterialsGasite® high‑chrome alloy, rubber (natural/NBR/EPDM), polyurethane, duplex, super duplex
BearingsDouble‑row tapered roller bearings, oil or grease lubrication
Seal optionsMechanical seal, stuffing box, expeller seal

Available Configurations:

  • LCC‑H – Hard metal (standard duty)

  • LCC‑R – Rubber lined (fine abrasives/corrosion)

  • LCC‑XH – Extra heavy hard metal (severe duty)

  • LCC‑HP – High pressure (up to 24 bar)

Typical Applications:

  • Sand & gravel – dredging, classification, dewatering

  • Tailings – mine tailings disposal, thickener underflow

  • In‑plant processes – mill discharge, cyclone feed, regrind circuits

  • Chemical slurry service – acids, salts, crystalline slurries

  • Mineral processing – phosphate, copper, iron ore, bauxite

  • Coal preparation – heavy media, cyclone feed, refuse handling

  • Secondary grinding – ball mill discharge, hydrocyclone feed

  • Dredging – cutter suction dredge booster pumps

Why Choose GIW® LCC?
The LCC series embodies GIW’s century of slurry pump expertise. Its Gasite® metallurgy delivers 2–4 times longer wear life than conventional hard irons, while the modular wet end design cuts maintenance downtime by 50% . With three seal types, five material grades, and hydraulic coverage from 50 to 300 mm, the LCC adapts to any solids‑handling challenge – from fine flotation froth to coarse tailings. Backed by GIW’s hydraulic laboratory, CFD optimization, and KSB’s global service network, the LCC pump series is the trusted standard for slurry pumping worldwide.

#GIW #LCC #SlurryPump #HardMetalPump #RubberLinedPump #HighPressurePump #AbrasiveSlurry #Tailings #Mining #MineralProcessing #Dredging #Gasite #WearResistant #CartridgeBearing #ExpellerSeal #KSB


Name:
Message:
Verification code:
Submit
Comment