The GIW® TBC is a heavy-duty, horizontal end-suction centrifugal slurry pump engineered specifically for high-pressure, long-distance hydraulic transport of abrasive slurries. Featuring a unique Tie Bolt Construction (TBC) casing, the pump safely contains high pressures while delivering flows up to 80,000 gpm (18,200 m³/h) and heads up to 300 ft (90 m) . With lower specific speed hydraulic design, GIW’s proprietary Slurry Diverter™ technology, and a two-piece suction plate “Front Door” access on larger models, the TBC series sets the benchmark for wear life, reliability, and maintainability in the most demanding pipeline transport applications.
Tie Bolt Construction (TBC) – Pressure load transferred to non‑wearing side plates held by large tie bolts; maximum safety and reliability at operating pressures up to 533 psi (37 bar) .
Lower Specific Speed Impeller – Large-diameter impeller enables slower rotational speed; extends wear life and provides stable operation over a wide flow range.
Slurry Diverter™ Technology – Reduces particle recirculation between impeller and suction liner; dramatically increases suction liner life.
Heavy-Duty Impeller with Clearing Vanes – CFD-optimised hydraulics for wear-resistant operation; active clearing vanes keep solids out of the nose gap.
Replaceable & Rotatable Suction Liner – Facilitates internal inspection; liner can be rotated to maximise service life; minimises wear part costs.
Impeller Release Ring – Three-piece segmented ring between shaft sleeve and shoulder; drastically reduces wet-end change-out time – standard on all TBC pumps.
Two-Piece Suction Plate Design (TBC 54 and larger) – “Front Door” access allows replacement of suction liner and impeller without removing the outer suction plate – maximum uptime.
Interchangeable Hydraulics & Materials – Same mechanical end accepts multiple hydraulic designs and material options (white iron, ductile iron, urethane, neoprene, special alloys); easily modified for changing duty conditions.
High Power Capability – Designed for up to 10,000 hp (7,450 kW) drives.
| Parameter | Value |
|---|---|
| Discharge Size | 18 – 30 in (450 – 760 mm) |
| Flow Rate | up to 80,000 US gpm (18,200 m³/h) |
| Total Head | up to 300 ft (90 m) |
| Pressure Rating | up to 533 psi (37 bar) |
| Power Rating | up to 10,000 hp (7,450 kW) |
| Design | Horizontal end suction, tie bolt construction |
| Impeller Types | 3, 4, 5, 6, 7, 9, 12, 14 vane options |
| Materials | Abrasion-resistant white iron, ductile iron, special alloys, elastomer linings |
Long-Distance Slurry Pipelines – Mine tailings, ore concentrate, phosphate, oil sands
Hydraulic Dredging & Fill – Beach nourishment, land reclamation
High-Pressure Cyclone Feed – Mineral processing circuits
SAG / Ball Mill Discharge – Heavy-duty mill circuit transfer
Coarse Slurry Transport – Industrial sands, ash handling, aggregate processing
Environmental Dredging – Contaminated sediment removal