The KSB HGM is a high-pressure, multistage ring-section pump specifically engineered for boiler feed duties in industrial and power generation applications. With heads up to 1,400 m, operating pressures up to 140 bar, and flows up to 390 m³/h (108 l/s) , the HGM delivers reliable, efficient performance in a compact, auxiliary-system-free design. Featuring product‑lubricated bearings, an axial suction inlet with optional suction impeller for low NPSH, and multiple hydraulic system options, the HGM pump ensures smooth operation, low maintenance, and optimum matching to customer requirements.
Very Smooth Operation – Product‑lubricated bearings eliminate external lubrication systems and ensure quiet, vibration‑free running.
Low NPSH Values – Axial suction inlet combined with optional suction impeller provides excellent suction performance, reducing the need for booster pumps.
No Auxiliary Systems Required – Designed to operate without cooling water or lubricant supply; simplifies installation and reduces lifecycle costs.
Easy Maintenance – One mechanical seal (uncooled up to 140 °C; with integrated air cooler up to 160 °C); modular design allows easy access to internal components.
Flexible Hydraulic Design – Various hydraulic system options enable optimum matching to exact duty point requirements.
Wide Material Selection – Available in multiple material variants to suit different fluid corrosivity and temperature conditions (see table below).
Compact & Efficient – Multistage ring-section design delivers high heads in a small footprint; suitable for 50/60 Hz operation.
| Parameter | Value |
|---|---|
| Flow Rate (Q) | up to 390 m³/h (108 l/s) |
| Head (H) | up to 1,400 m (4,593 ft) |
| Operating Pressure | up to 140 bar (2,030 psi) |
| Fluid Temperature | up to +160 °C (+320 °F) |
| Speed | up to 3,600 rpm |
| Frequency | 50 / 60 Hz |
| Design | Multistage ring-section (horizontal) |
| Bearings | Product‑lubricated |
| Shaft Seal | Single mechanical seal (uncooled or air‑cooled) |
Higher ratings available on request.
| Component | Variant 3 | Variant 4 | Variant 7* |
|---|---|---|---|
| Discharge casing | Stainless steel | Stainless steel | Steel |
| Stage casing | Stainless steel / steel** | Stainless steel / steel** | Steel |
| Suction stage impeller | Stainless steel | Stainless steel | Stainless steel |
| Impellers | Stainless steel | Stainless steel | Stainless steel |
| Diffusers | Stainless steel | Stainless steel | Stainless steel |
| Shaft | Steel | Stainless steel | Steel |
Variant 7 only for pump sizes 2 and 3.
*Depending on pump size and stage.
Industrial Boiler Feed – Steam generators in manufacturing, chemical, and petrochemical plants
Power Generation – Small to medium power station boiler feed
High-Pressure Water Supply – Process water injection, pressure boosting
Cogeneration & CHP Plants – Boiler feed for combined heat and power systems
General Industry – High-head clean fluid transfer requiring minimal auxiliary systems