The KSB HGM-S is a high-pressure, multistage ring-section centrifugal pump specifically engineered for boiler feedwater and condensate pumping in power stations and industrial facilities. With heads up to 1,000 m, operating pressures up to 100 bar, and flows up to 390 m³/h (1,717 US gpm) , the HGM-S delivers reliable, efficient performance in a compact, auxiliary-system-free design. Featuring product‑lubricated bearings, an axial suction inlet with optional suction impeller for low NPSH, and robust chrome steel construction with wear rings, the HGM-S pump ensures very smooth operation, long service life, and easy maintenance.
Very Smooth Operation – Product‑lubricated bearings eliminate external lubrication systems and ensure quiet, vibration‑free running.
Low NPSH Values – Axial suction inlet combined with optional suction impeller provides excellent suction performance, reducing the need for booster pumps.
No Auxiliary Systems Required – Designed to operate without cooling water or lubricant supply; simplifies installation and reduces lifecycle costs.
Robust Design, Long Service Life – Stage casings fitted with wear rings; impellers and diffusers in chrome steel for superior wear resistance.
Easy Maintenance – Various hydraulic system options allow optimum matching to exact duty point; equipped with KSB mechanical seal (uncooled up to 160 °C).
Wide Material Selection – Available in multiple material variants to suit different fluid corrosivity and temperature conditions (see table below).
Compact & Efficient – Multistage ring-section design delivers high heads in a small footprint; suitable for 50/60 Hz operation.
| Parameter | 50 Hz | 60 Hz |
|---|---|---|
| Max. Flow Rate | 325 m³/h (1,431 US gpm) | 390 m³/h (1,717 US gpm) |
| Max. Head | 1,000 m (3,280 ft) | 1,000 m |
| Max. Temperature | up to 160 °C (320 °F) | up to 160 °C |
| Max. Pressure | 100 bar (1,450 psi) | 100 bar |
| Nominal Size | 25 – 125 mm (1" – 5") | 25 – 125 mm |
| Design | Multistage ring-section (horizontal) | |
| Bearings | Product‑lubricated | |
| Shaft Seal | KSB mechanical seal (uncooled up to 160 °C) |
Higher ratings available on request.
| Component | Variant 3 | Variant 4 | Variant 7* |
|---|---|---|---|
| Discharge casing | Stainless steel | Stainless steel | Steel |
| Stage casing | Stainless steel / steel** | Stainless steel / steel** | Steel |
| Suction stage impeller | Stainless steel | Stainless steel | Stainless steel |
| Impellers | Stainless steel | Stainless steel | Stainless steel |
| Diffusers | Stainless steel | Stainless steel | Stainless steel |
| Shaft | Steel | Stainless steel | Steel |
Variant 7 only for pump sizes 2 and 3.
*Depending on pump size and stage.
Power Stations – Boiler feedwater, condensate extraction
Industrial Plants – Boiler feed for manufacturing, chemical, petrochemical facilities
Cogeneration & CHP Plants – Boiler feed for combined heat and power systems
High-Pressure Water Supply – Process water injection, pressure boosting
General Industry – High-head clean fluid transfer