Product Name: KSB HPH – High-Pressure Hot Water Circulating Pump (TÜV-Approved to TRD)
Product Overview:
The KSB HPH is a horizontal, radially split volute casing pump specifically engineered for high-pressure hot water generation plants. Designed as feed pump and circulating pump for boiler systems, it is type-tested by TÜV in accordance with TRD (German Steam Boiler Regulations). With operating pressures up to 110 bar and temperatures up to +320 °C, the HPH series represents KSB‘s premium solution for critical high-temperature, high-pressure water circulation in power generation and industrial heating.
Key Features & Benefits:
TÜV-Certified Safety & Compliance
Type-tested to TRD 501 (German Steam Boiler Regulations) by TÜV.
Optional material and product testing to TRD 401/402 for boiler-integrated pumps (VdTÜV acceptance).
Hydrostatic pressure test certified – full traceability.
Certified quality management ISO 9001.
High Pressure & Temperature Capability
Operating pressure: Up to 110 bar.
Operating temperature: Up to +320 °C.
Flow rate: Up to 1,800 m³/h.
Head: Up to 225 m.
Pump sizes: DN 40 to DN 300.
Robust Mechanical Design
Radially split volute casing with replaceable casing wear rings.
Centreline pump feet – ensures perfect alignment under thermal expansion.
Back pull-out design – rotating assembly removable without disturbing piping.
Integrally cast centreline feet and bearing bracket lantern with integrated cooling chamber.
Optional hydraulic balancing via back vanes.
Double volute or inducer available for specific size combinations.
Advanced Shaft Seal System
Balanced, single-acting mechanical seals (Crane 8 BVS, Burgmann SH 10 PV 10/...).
Product circulation cooling – seal chamber → heat exchanger → seal chamber, supported by pumping ring.
Cartridge-type mechanical seal option – quick, careful removal for overhaul without disassembling the pump.
Bearing & Lubrication
Wide range of bearing brackets (P02a, P03s/a, P04s/a, P06s/at, etc.) matched to pump size and pressure rating.
Angular contact ball bearings and cylindrical roller bearings – long service life.
Performance & Acceptance Testing
100% performance test run – duty point guaranteed to ISO 9906/2A.
Optional acceptance tests:
ISO 9906/2A (1 or 5 measuring points)
ISO 9906/1 (5 measuring points, individual curve)
NPSH test (1 or 5 measuring points)
TÜV type test certificate available on request.
Spare Parts Planning to DIN 24296
KSB provides recommended spare parts stock for 2 years‘ operation – shafts, impellers, bearings, mechanical seals, wear rings, shaft sleeves, gaskets, coupling elements.
Enables predictive maintenance and maximum plant availability.
Material & Coating
Casing materials: GP240GH+N, 1.7706, 1.4931 to EN 1092-1 (PN 63, PN 100).
Flange options: EN 1092-1 (PN 63 / PN 100), PN 160 (DIN 2548), ASME 400 / 600 / 900.
Preservation to KSB works standard AN 1865:
Synthetic enamel RAL 5002 (ultramarine blue)
Heat-resistant enamel RAL 9007 (aluminium grey)
Water-repellent rinse for machined parts.
Technical Parameters Summary:
| Parameter | Value |
|---|---|
| Pump sizes (DN) | 40 to 300 |
| Flow rate (Q) | Up to 1,800 m³/h |
| Head (H) | Up to 225 m |
| Operating pressure (p) | Up to 110 bar |
| Fluid temperature (t) | –20 °C to +320 °C |
| Speed | 1,450 rpm (50 Hz) – selection charts available |
| Flange standards | EN 1092-1 (PN 63, PN 100), DIN 2548 (PN 160), ASME 400/600/900 |
| Design | Radially split, single-stage, single-flow, radial impeller, centreline mounted |
| Seal type | Balanced single-acting mechanical seal, product-lubricated & cooled, cartridge option |
| Bearings | Angular contact ball bearings + cylindrical roller bearings |
| Materials | GP240GH+N, 1.7706, 1.4931 |
| Certification | ISO 9001, TRD 501, TÜV type-tested, VdTÜV optional |
Typical Applications:
High-pressure hot water generating plants – boiler feed and circulation.
Power stations – thermal and combined heat & power (CHP).
District heating networks – primary circuit circulation.
Industrial heating systems – refineries, chemical plants, paper mills.
Process heat transfer – high-temperature water as energy carrier.
Marine and offshore – boiler circulation (subject to classification).
Why Choose KSB HPH?
The HPH series is Germany‘s benchmark for high-pressure hot water pumps. Its TÜV type-testing to TRD provides unquestionable safety and legal compliance for boiler feed duties. With 110 bar / 320 °C capability, cartridge mechanical seals, centreline casing support, and ISO 9906 performance guarantees, the HPH is engineered for decades of reliable operation in the world‘s most demanding thermal plants. Backed by KSB’s global service network and comprehensive spare parts recommendations to DIN 24296, it delivers maximum uptime and minimum lifecycle cost.
#KSB #HPH #HighPressurePump #HotWaterPump #BoilerFeedPump #TÜVApproved #TRD501 #PowerPlant #DistrictHeating #IndustrialHeating #Centrepump #CartridgeSeal #110Bar #320Degrees #ISO9906 #DIN24296 #GermanEngineering