KSB HPK-L – Heat Transfer Fluid / Hot Water Pump (ISO 2858 / ISO 5199)

2026-02-12 15:22

Product Name: KSB HPK-L – Heat Transfer Fluid / Hot Water Pump (ISO 2858 / ISO 5199)

Product Overview:
The KSB HPK-L is a horizontal, single-stage centrifugal pump specifically engineered for organic and synthetic heat transfer fluids as well as high-temperature hot water. Designed to ISO 2858 dimensions and ISO 5199 technical requirements, it ensures global interchangeability and maximum reliability. Featuring the patented KSB VenJet® automatic venting chamber, the HPK-L protects the mechanical seal from dry running, while air-cooled bearing brackets with thermal barrier eliminate the need for external cooling. With fluid temperature capability up to +400 °C and operating pressure up to 40 bar, the HPK-L is the premium choice for industrial heating, district heating, and forced circulation boiler systems.

Key Features & Benefits:

Reliable Operation – Patented VenJet® Technology

  • VenJet® venting chamber continuously removes air from the rotating parts during operation.

  • Prevents mechanical seal dry running – eliminates a major cause of seal failure.

  • Ensures stable operation even with gas-entrained heat transfer fluids.

Energy-Efficient & No External Cooling Required

  • Improved hydraulic flow passages – high efficiency levels across the operating range.

  • Pump characteristic adjusted to duty point as standard – impeller trimming available.

  • Additional ISO selection chart sizes – enables selection close to best efficiency point (BEP).

  • Air-cooled bearing bracket with integrated heat barrier and fan impeller – no external cooling water or power required.

Long Operating Life – Robust Bearing & Shaft System

  • Two grease-lubricated angular contact ball bearings in back-to-back arrangement – designed for ≥ 25,000 operating hours.

  • Product-lubricated SiC/SiC plain bearing – excellent dry-running resistance and wear properties.

  • Rigid shaft design with low deflection – extends mechanical seal and bearing life.

Universal Use – Material Variants for Every Application

  • Material combinations tailored to fluid type, temperature, and pressure.

  • Available in multiple configurations: S, E, Z, Y variants.

  • Casing, impeller, casing wear rings, and mechanical seals (single or double) available in ductile iron, cast steel, stainless steel, and high-temperature alloys.

  • Suitable for both synthetic and mineral heat transfer oils as well as pressurised hot water.

Standard-Compliant & Interchangeable

  • Dimensions to ISO 2858, technical requirements to ISO 5199.

  • Flange drilling to EN 1092-1 (other standards on request).

  • Back pull-out design – rotating assembly removable without disturbing piping or motor.

Technical Parameters:

Parameter50 Hz / 60 Hz Value
Flow rate (Q)≤ 1,160 m³/h
Head (H)≤ 162 m
Fluid temperature – Variant S / Z–40 °C to +350 °C
Fluid temperature – Variant E / Y–40 °C to +400 °C
Operating pressure – Variant E / S≤ 25 bar
Operating pressure – Variant Y / Z≤ 40 bar
Speed1,450 / 1,750 rpm (selection charts available)
DesignHorizontal, single-stage, radial impeller, volute casing
BearingsGrease-lubricated angular contact ball bearings + SiC/SiC product-lubricated plain bearing
VentingPatented VenJet® automatic venting chamber
CoolingAir-cooled bearing bracket (no external cooling required)

Materials of Construction (Variant Overview):

ComponentS VariantE VariantZ VariantY Variant
Volute casingGP240GH+N1.7706––
Casing coverEN-GJS-400-18-LTP250GH / P3535NLEN-P3535NL–
ImpellerEN-GJL-250 / 1.4408EN-GJL-250 / 1.4408EN-GJL-250 / 1.4408EN-GJL-250 / 1.4408
Shaft1.4021 + QT8001.4021 + QT8001.4021 + QT8001.4021 + QT800
Bearing bracketEN-GJS-400-18-LTEN-GJS-400-18-LTEN-GJS-400-18-LTEN-GJS-400-18-LT
Plain bearingSiC/SiCSiC/SiCSiC/SiCSiC/SiC

Additional special materials available on request.

Typical Applications:

  • Heat transfer systems – synthetic and mineral thermal oil circuits

  • Forced circulation boilers – high-temperature hot water generation

  • District heating networks – primary and secondary circulation

  • Industrial heating plants – chemical, pharmaceutical, petrochemical

  • Hot water systems – pressurised hot water up to 400 °C

  • Solar thermal power plants – heat transfer fluid circulation

  • Biomass and waste-to-energy plants – thermal oil circuits

Why Choose KSB HPK-L?
The HPK-L is KSB‘s dedicated high-temperature pump for heat transfer fluids. Unlike standard water pumps adapted for hot service, the HPK-L is engineered from the ground up for 350 °C / 400 °C continuous operation with no external cooling. The VenJet® venting system is a game-changer for thermal fluid systems – it automatically removes vapour and air, protecting the seal and ensuring stable hydraulic performance throughout the pump‘s life. With ISO 2858 interchangeability, 25,000-hour bearings, and material variants for every duty, the HPK-L delivers lowest lifecycle cost in the most demanding high-temperature applications.

#KSB #HPKL #HeatTransferFluid #ThermalOilPump #HotWaterPump #HighTemperaturePump #ISO2858 #ISO5199 #VenJet #NoExternalCooling #DistrictHeating #IndustrialHeating #ForcedCirculation #SiC #ThermalFluid #EnergyEfficient


Name:
Message:
Verification code:
Submit
Comment