The KSB MK, MKA, and MKY are vertical submersible pumps designed for reliable handling of contaminated water, condensate, and heat transfer media in industrial and building services applications. Featuring a three-channel impeller and a volute casing integrated with an inlet strainer, these pumps offer clog-resistant operation and long service life. With flow rates up to 36 m³/h, heads up to 19 m, and temperature ratings up to 200 °C (MKY series), they are the ideal solution for automatic drainage, condensate return, and heating circuit circulation.
Three-Channel Impeller – Optimised for solids-laden fluids; handles grain sizes up to 18 mm (MK/MKA); ensures reliable, clog-free operation.
Integrated Inlet Strainer – Volute casing acts as strainer; protects pump from large debris.
Vertical Submersible Design – Space-saving installation in pits, tanks, or heat exchangers; no external cooling required.
Product-Lubricated Plain Bearing – On pump side for low maintenance; motor-side grease-lubricated deep-groove ball bearing.
Wide Material Selection:
MK/MKA: Cast iron / chrome steel / galvanised steel (standard)
MK/MKA-B: Tin bronze / chrome nickel molybdenum steel (for corrosion resistance)
MK/MKA-C: Cast chrome nickel molybdenum steel (full stainless)
MKY: Cast iron / chrome steel (for high temperature)
High Temperature Capability – MKY series handles up to 200 °C (water up to 110 °C) for heat transfer and condensate applications.
Explosion-Proof Options – Available with EEx-dellB+H2-T4 or Ex-e certification for hazardous areas.
Surface-Cooled Motor – Three-phase squirrel cage motor, IP55 / IP54 enclosure, type V1 construction.
Optional Bearing Bush Materials – Choose from:
Tin bronze, cast iron, acrylonitrile-butadiene rubber, fluorocaoutchouc, PTFE (glass-fibre reinforced), carbon (phenolic resin/antimony impregnated), DEVA®
Tailored to dry-running resistance, sand resistance, oil resistance, and chemical resistance
| Parameter | MK / MKA | MKY |
|---|---|---|
| Flow Rate (Q) | 2 – 36 m³/h | 2 – 36 m³/h |
| (0.56 – 10 l/s) | (0.56 – 10 l/s) | |
| Head (H) | up to 19 m (62 ft) | up to 19 m (62 ft) |
| Fluid Temperature | -10 °C to +90 °C | up to +200 °C (392 °F) |
| Operating Pressure | Atmospheric / low pressure | Atmospheric / low pressure |
| Motor | 230/400 V, 3-phase, IP55/IP54 | 230/400 V, 3-phase, IP55 |
| Max. Solids Size | 18 mm (0.7 in) | – (clean fluids) |
| Design | Vertical submersible, three-channel impeller, volute casing with strainer |
Higher ratings available on request.
Automatic drainage of rooms with flood hazard
Drainage of collecting tanks or pits
Condensate return from unpressurised tanks
Handling of contaminated water, oils, emulsions, aggressive media (with appropriate material selection)
Condensate return plants
Secondary and primary circuits of heating circuits
Direct installation in heating tanks or heat exchangers of secondary circuits in heat transfer plants
Circulation of heat transfer media below boiling point