The KSB PNW and SNW are vertical or horizontal tubular casing pumps engineered for high flow, low to medium head water transport in municipal, industrial, and agricultural applications. The PNW series features axial flow propeller impellers for very high flows at low heads (up to 10 m), while the SNW series utilises mixed flow impellers for medium heads (up to 60 m). With flows up to 9,000 m³/h (PNW) and 6,500 m³/h (SNW) , these pumps deliver reliable, efficient, and low-maintenance performance in irrigation, drainage, stormwater pumping, raw water transport, cooling water circuits, and dock/lock operations. Featuring maintenance‑free RESIDUR® bearings, easy installation, and corrosion‑resistant materials, the PNW/SNW series ensures long service life and low operating costs in the most demanding water handling applications.
Easy to Install – Drive lantern with recess simplifies motor mounting and eliminates the need for alignment.
Reliable and Durable – Bi‑rotational sleeve coupling is fully encapsulated for high corrosion resistance and reliable operation.
Low Maintenance Costs – Short shaft overhang minimises shaft deflection and reduces bearing loads.
High Operating Reliability & Low Operating Costs – Maintenance‑free, wear‑resistant RESIDUR® bearings operate without external cooling or lubrication systems, eliminating auxiliary system costs. Temporary dry‑running during start‑up will not damage the pump. Excellent chemical and physical resistance makes the pump suitable for virtually any fluid, including solids‑laden water.
Consistent Efficiencies – Corrosion‑resistant and wear‑resistant materials (cast iron, bronze, stainless steel, aluminium bronze) help maintain optimum pump efficiency over time.
Ever‑Clean Blade Design (PNW only) – Special hydraulic design prevents propeller blades from being clogged by fibres or debris in the fluid.
Wide Material Selection – Bellmouth, diffuser, and discharge elbow in cast iron; column pipe(s) and drive lantern in steel; shaft in steel or stainless steel; impeller in bronze or stainless steel (SNW); propeller in aluminium bronze (PNW).
| Parameter | PNW (Axial Flow) | SNW (Mixed Flow) |
|---|---|---|
| Flow Rate (Q) | ≤ 9,000 m³/h (39,600 US gpm) | ≤ 6,500 m³/h (38,000 US gpm) |
| Head (H) | ≤ 10 m (33 ft) | ≤ 60 m (197 ft) |
| Max. Fluid Temperature | +60 °C (+140 °F) | +60 °C (+140 °F) |
| Speed | ≤ 1,500 rpm | ≤ 1,500 rpm |
| Design | Vertical or horizontal tubular casing | Vertical or horizontal tubular casing |
| Impeller Type | Axial flow propeller (PNW) | Mixed flow impeller (SNW) |
| Bearings | Maintenance‑free RESIDUR® | Maintenance‑free RESIDUR® |
| Coupling | Bi‑rotational, encapsulated sleeve coupling | Bi‑rotational, encapsulated sleeve coupling |
| Materials | Cast iron, steel, aluminium bronze, stainless steel | Cast iron, steel, bronze, stainless steel |
Higher ratings and special materials available on request.
General Irrigation Systems – Large-scale agricultural water supply
Drainage Systems – Land drainage, flood control
Stormwater Pumping Stations – High-capacity stormwater removal
Raw and Clean Water Transport – Water works, municipal supply
Cooling Water Pumps – Power stations and industrial plants
Industrial Water Supply – Process water, utility water
Docks and Locks – Water level control, lock filling/emptying