KSB RPH – API 610 Type OH2 Heavy-Duty Single-Stage End Suction Process Pump

2026-02-13 14:12

KSB RPH – API 610 Type OH2 Heavy-Duty Single-Stage End Suction Process Pump

Product Overview

The KSB RPH is a heavy-duty, single-stage, end suction centrifugal pump fully conforming to API 610 Type OH2 standards. Engineered for continuous, reliable service in the most demanding hydrocarbon, petrochemical, chemical, and high-temperature industrial applications, the RPH series combines over 70 hydraulic systems, double volute design (DN 80 and above), and maximum shaft diameter to API 610 – delivering superior efficiency, extended mechanical seal and bearing life, and lowest life cycle costs. With temperature capability from -70 °C to +450 °C and pressure rating up to 110 bar (1,595 psi) , the RPH is the benchmark for API 610 OH2 process pumps.


Key Features & Benefits

  • API 610 Type OH2 Compliant – Heavy-duty, centerline discharge, foot-mounted casing; designed for continuous operation in critical refinery, petrochemical, and power applications.

  • Over 70 Hydraulic Systems – Broadcast hydraulic selection in its class; enables optimum pump selection to API 610 for highest efficiencies and lowest energy consumption.

  • Double Volute Design (DN 80 and above) – Balances radial forces; prevents shaft deflection; considerably reduces load on bearings and mechanical seal; extends component life.

  • Maximum Shaft Diameter to API 610 – Minimises shaft deflection and vibration at seal faces; ensures long mechanical seal service life.

  • Heavy-Duty 40° Angular Contact Thrust Bearings – Exceeds API 610 requirements; oil bath or oil mist lubrication; extended bearing life under all operating conditions.

  • No Cooling Water Circuit Required – Steel bearing bracket with integrated cooling fins; optional fan impeller protects unit from overheating at high fluid and ambient temperatures; eliminates external cooling water supply.

  • Active Axial Force Balancing System – Duty-point specific balancing system markedly reduces axial forces; extends bearing life and improves reliability.

  • Cartridge Mechanical Seal – Fully compliant with ISO 24109 / API 682; easy to install and remove; ensures accurate seal setting and reduced maintenance downtime.

  • High Pressure & Temperature Capability – Flanges available for all common pipeline standards up to PN100 / ASME Class 600; service temperature from -70 °C to +450 °C.

  • Wide Material Selection – Full range of metallic materials available for corrosive, erosive, and high-temperature services.


Technical Specifications

Parameter50 Hz60 Hz
Nominal Diameter25 – 400 mm (1 – 16 in)25 – 400 mm (1 – 16 in)
Max. Flow Rate4,150 m³/h5,000 m³/h

18,200 US gpm22,000 US gpm
Max. Head270 m270 m

886 ft886 ft
Max. Temperature-70 °C to +450 °C-94 °F to +842 °F
Max. Pressure110 bar1,595 psi
Design StandardAPI 610 Type OH2 / ISO 13709
Seal StandardAPI 682 / ISO 24109
Flange RatingUp to PN100 / ASME Class 600

Applications

  • Refining – Charge stock, fractionator bottoms, reformer feed, light hydrocarbon transfer, amine circulation, ultra low sulfur diesel, heavy naphtha

  • Petrochemical & Chemical Processing – High-temperature process fluids, acids, caustics, solvents, toxic and flammable liquids

  • Oil & Gas Production – Crude transfer, condensate, produced water, pipeline booster

  • Power Generation – Boiler feed boosting, high-temperature water circulation, condensate

  • Industrial & General Process – High-pressure hot water, thermal oil, heat transfer fluids, industrial process transfer

  • Synthetic Fuels & Fertilizer – High-pressure ammonia, urea, methanol processes


Name:
Message:
Verification code:
Submit
Comment