KSB RPH-LF – API 610 Type OH2 Low Flow / High Head Heavy-Duty Process Pump

2026-02-13 14:18

KSB RPH-LF – API 610 Type OH2 Low Flow / High Head Heavy-Duty Process Pump

Product Overview

The KSB RPH-LF is a specialised variant of the API 610 Type OH2 single-stage, end suction centrifugal pump, engineered exclusively for low flow, high head process applications in refineries, petrochemical plants, chemical facilities, and onshore/offshore installations. Utilising an innovative impeller and diffuser hydraulic system machined from a single piece – eliminating the need for radiographic inspection – the RPH-LF delivers exceptionally stable hydraulic performance, superior NPSH behaviour without an inducer, and full API 610 compliance. With heads up to 488 metres (1,601 ft) at 60 Hz, pressure rating to 110 bar (1,595 psi) , and ATEX approval, the RPH-LF sets the benchmark for high-energy, low-capacity API 610 OH2 pumping duties.


Key Features & Benefits

  • API 610 Type OH2 Compliant – Fully conforms to current API 610 / ISO 13709; ATEX‑approved for hazardous area operation.

  • Optimised for Low Flow / High Head – Specifically designed for flow rates ≤ 40 m³/h (176 US gpm) and heads up to 488 m (1,601 ft) ; fills the critical performance gap not covered by standard OH2 pumps.

  • Innovative Impeller + Diffuser Design – Machined from solid forging / bar stock; no radiographic testing required; precise hydraulic matching to duty point; multiple impeller and diffuser sizes available for tailored hydraulic solutions.

  • Large Inlet Area – Provides excellent NPSH₃ values; no inducer required; reduces complexity and cost.

  • Maximum Shaft Diameter to API 610 – Minimises shaft deflection and vibration at seal faces; ensures long mechanical seal service life.

  • Heavy-Duty 40° Angular Contact Thrust Bearings – Exceeds API 610 requirements; oil bath or oil mist lubrication; extended bearing life under high axial loads.

  • No Cooling Water Circuit Required – Steel bearing bracket with integrated cooling fins; optional fan impeller protects unit from overheating at high fluid and ambient temperatures; eliminates external cooling water supply.

  • Cartridge Mechanical Seal – Fully compliant with ISO 24109 / API 682; easy to install and remove; ensures accurate seal setting and reduced maintenance downtime.

  • High Pressure Capability – Standard flanges ANSI B16.5 Class 300 / Class 600; maximum allowable working pressure 110 bar (1,595 psi) .

  • Flexible Nozzle Configurations – Various discharge orientations available with no extra capital investment; matches on‑site piping systems without costly adapters.

  • Compact & Robust – Nominal diameter 50 mm (2 in) ; ideal for space‑constrained installations.


Technical Specifications

Parameter50 Hz60 Hz
Nominal Diameter50 mm (2 in)50 mm (2 in)
Max. Flow Rate40 m³/h40 m³/h

176 US gpm176 US gpm
Max. Head339 m488 m

1,112 ft1,601 ft
Max. Temperature-30 °C to +200 °C-20 °F to +392 °F
Max. Pressure110 bar1,595 psi
Flange RatingANSI B16.5 Class 300 / 600
Design StandardAPI 610 Type OH2 / ISO 13709
Seal StandardAPI 682 / ISO 24109
ApprovalsATEX

Applications

  • Refineries – Charge stock, fractionator bottoms, reformer feed, light hydrocarbon transfer, amine circulation, high pressure hydrotreater feed

  • Petrochemical & Chemical Processing – High-pressure chemical dosing, catalyst feed, reactor feed, toxic and flammable liquid transfer

  • Onshore & Offshore Oil & Gas – Condensate injection, produced water reinjection, chemical injection packages

  • Industrial Process – High-pressure hot water, boiler feed, high-head condensate return

  • Synthetic Fuels & Fertilizer – High-pressure ammonia, urea, methanol injection services


Name:
Message:
Verification code:
Submit
Comment