The KSB RWCP and RWCN are vertical centrifugal sump pumps engineered for reliable handling of a wide variety of industrial fluids under diverse pressure and temperature conditions. Available in two configurations – RWCP with discharge pipe and RWCN without discharge pipe – these pumps offer easy maintenance, process-oriented design, and a choice of impeller types (free-flow, channel, or semi-open) to match specific fluid characteristics. With flow rates up to 700 m³/h (50 Hz) / 890 m³/h (60 Hz) , operating pressure up to 16 bar, and immersion depths up to 5,785 mm, the RWCP/RWCN series is the ideal solution for industrial sump drainage, process water transfer, and wastewater handling.
Easy Maintenance – Impeller can be removed without disturbing piping or motor; simplifies inspection and replacement.
Versatile Application – Suitable for various fluids under diverse pressure and temperature conditions; available with free-flow, channel, or semi-open impellers to handle clean, solids-bearing, or fibrous media.
Process-Oriented Design – Pump hydraulics tailored to specific process requirements; grease-lubricated bearings above the sump; medium-lubricated bearings within the pump for reliable operation.
Two Configurations:
RWCP: With discharge pipe – for applications requiring a rigid discharge column.
RWCN: Without discharge pipe – for simplified installation where flexible discharge is acceptable.
Flexible Installation – Available with rectangular baseplate (standard) or circular baseplate (optional) to suit different pit or tank configurations.
Wide Material Selection:
Pump casing: GG25 (grey cast iron) or CF8M (stainless steel)
Impeller: GG25, CF8M, or CA6NM (13% chrome steel)
Shaft: F114 carbon steel or AISI 316L stainless steel
Column: ST37 carbon steel or AISI 316L
Bearings: TFM (filled PTFE) for low friction and wear resistance
| Parameter | 50 Hz | 60 Hz |
|---|---|---|
| Size (DN) | 50 – 200 mm (2 – 8 in) | 50 – 200 mm |
| Flow Rate (Q) | up to 700 m³/h | up to 890 m³/h |
| up to 3,082 US gpm | up to 3,920 US gpm | |
| Max. Operating Pressure | 16 bar (232 psi) | 16 bar |
| Fluid Temperature | -10 °C to +100 °C | -10 °C to +100 °C |
| Max. Immersion Depth | 5,785 mm (19 ft) | 5,785 mm |
| Pump Type | Vertical centrifugal sump pump | |
| Impeller Types | Free-flow, channel, semi-open | |
| Bearings | Grease-lubricated (above sump) + medium-lubricated (in pump) | |
| Materials | GG25, CF8M, CA6NM, AISI 316L, ST37, TFM |
Higher ratings available on request.
Industrial Sump Drainage – Pumping of process water, wastewater, and effluents from pits and tanks
Process Water Transfer – Circulation and boosting of clean or slightly contaminated industrial fluids
Wastewater Handling – Solids-bearing liquids (with appropriate impeller selection)
Cooling Water Circuits – Return and transfer duties in industrial cooling systems
Chemical & Petrochemical – Corrosive fluids (with stainless steel materials)
General Industry – Any vertical sump pumping application requiring reliable, low-maintenance operation