Product Name: KSB SYT Series – High-Temperature Centrifugal Pumps for Thermal Oil & Hot Water
Product Overview:
The KSB SYT Series (including Etanorm SYT, Etabloc SYT, and Etaline SYT) is a family of single-stage centrifugal pumps engineered specifically for mineral and synthetic heat transfer oils as well as high-temperature hot water. Designed for continuous reliable operation up to 350 °C, these pumps combine KSB‘s proven hydraulic platforms with advanced thermal management, patented venting technology, and flexible drive solutions—delivering customized efficiency and safety for the most demanding thermal fluid applications.
Key Features & Benefits:
Reliability & Safety First
Designed for mineral and synthetic thermal oils up to 350 °C continuous operation.
KSB VenJet® patented venting system ensures automatic, reliable degassing during pump operation—prevents vapor lock and dry running.
Single mechanical seal or tandem double mechanical seal with quench system for maximum leak safety.
Enhanced safety package: additional shaft seal ring, special contour for controlled seal leakage removal, heavy-duty bearings pre-packed with special grease, closed sealing elements, and effective thermal barrier.
ATEX certified versions available for explosive atmospheres.
DNV-GL type approval for marine and offshore applications.
Customized & Energy-Efficient
Impeller trimming as standard to meet exact duty points.
Wide motor range up to IE5 efficiency class; variable speed operation via KSB PumpDrive intelligent control system.
Hydraulics validated by extensive testing and CFD calculation for high water economy.
Slotted hub coupling design enables easy assembly and disassembly of coupling hub.
Optional double universal joint coupling for superior shaft misalignment compensation.
Optional fan cooling (Etanorm SYT) for enhanced thermal dissipation.
Compliance with EN PN16 and ASME flange standards.
Easy Monitoring & Predictive Maintenance
KSB Leakage Sensor – mechanical measurement principle for continuous leak monitoring; enables planned maintenance and avoids unplanned downtime.
Standard interfaces for vibration and temperature sensors; sensor assemblies can be ordered together with the pump.
Casing wear rings and jacking screws simplify maintenance and reduce repair costs.
Materials of Construction:
Volute casing, gland, bearing bracket: EN-GJS-400-15 / 536 GR 60-40-18 (ductile iron)
Shaft: 1.4021 + QT (heat-treated, HRC 55)
Impeller: EN-GJL-250 / A 48 CL 35B (grey cast iron), secured with Nord-Lock washers
Casing wear rings: Grey cast iron
Fully compatible with high-temperature thermal fluids and hot water.
Technical Parameters (50 Hz / 60 Hz):
| Model Series | Flow Rate (m³/h) | Head (m) | Fluid Temp (Thermal Oil) | Fluid Temp (Hot Water) | Operating Pressure |
|---|---|---|---|---|---|
| Etabloc SYT | Up to 280 / 337 | Up to 68 / 69 | -30 °C to +350 °C | -30 °C to +180 °C | 16 bar |
| Etaline SYT | Up to 316 / 381 | Up to 99 / 101 | -30 °C to +350 °C | -30 °C to +180 °C | 16 bar |
| Etanorm SYT/R | Up to 1,900 / 2,280 | Up to 102 / 90 | -30 °C to +350 °C | -30 °C to +180 °C | 16 bar |
Typical Applications:
Heat transfer systems (mineral oil, synthetic oil)
High-temperature hot water circuits
Chemical and petrochemical industries
Marine and offshore (DNV-GL certified)
Industrial heating and thermal fluid plants
ATEX-classified hazardous areas
Why Choose KSB SYT Series?
The SYT Series is not a standard water pump adapted for hot service—it is engineered from the ground up for high-temperature thermal fluids. With proven reliability at 350 °C, patented automatic venting, and intelligent efficiency features like PumpDrive and IE5 motors, it sets the benchmark for safety, energy savings, and low lifecycle cost in thermal oil and hot water pumping.
#KSB #SYTSeries #ThermalOilPump #HeatTransferFluid #HighTemperaturePump #HotWaterPump #EtanormSYT #EtablocSYT #EtalineSYT #KSBVenJet #PumpDrive #IE5 #ATEX #MarinePump #DNVGL #IndustrialHeating