KSB WKT / WKTA – Vertical Can-Type Multistage Condensate Pump for Power Plants & Industry

2026-02-13 19:53

KSB WKT / WKTA – Vertical Can-Type Multistage Condensate Pump for Power Plants & Industry

Product Overview

The KSB WKT and WKTA are vertical, multistage, can-type centrifugal pumps engineered specifically for condensate handling in power stations and industrial plants. Featuring a space-saving can design installed below floor level, radial and mixed flow impellers, and single or double-entry suction stages, these pumps deliver high head and reliable performance in condensate extraction, booster, and transfer duties. With capacities up to 1800 m³/h, heads up to 340 m, and discharge pressures up to 40 bar, the WKT/WKTA series ensures efficient, trouble‑free operation in the most demanding power generation and industrial process applications.


Key Features & Benefits

  • Vertical Can-Type Construction – Pump enclosed in a cylindrical can (barrel) installed in a pit below floor level; saves valuable space and simplifies piping; baseplate connects pump to structure.

  • Multistage Hydraulics – Radial and mixed flow impellers in multistage arrangement; single‑entry and double‑entry suction impellers optimise suction performance and minimise NPSH requirements.

  • Reliable Bearing Concept – Medium‑lubricated radial plain bearings inside pump; combined radial/axial thrust bearing assembly with oil‑bath lubrication located above shaft seal – long bearing life, no external lubrication required.

  • Hydraulic Axial Thrust Balancing – Balancing holes and casing wear rings minimise axial thrust; reduces bearing loads.

  • Flexible Shaft Seal – Choice of gland packing or double‑acting mechanical seal in tandem arrangement; shaft equipped with replaceable sleeve in seal area.

  • Horizontal Nozzles Above Floor – Suction and discharge flanges located horizontally above installation floor for easy pipe connection; flanges to DIN or ASME standards.

  • Direct Motor Drive – Driven by vertical electric motor mounted on motor stool above pump; compact, efficient transmission.

  • Wide Material Selection – Components available in cast iron, carbon steel, cast steel, chrome steel, stainless steel, and special materials for wear rings and bearings; tailored to condensate quality and temperature.


Technical Specifications

ParameterValue
Capacity (Q)up to 1,800 m³/h (7,925 US gpm)
Head (H)up to 340 m (1,115 ft)
Fluid Temperatureup to 100 °C (212 °F)
Suction Pressure (ps)up to 3 bar (43.5 psi)
Discharge Pressure (pd)up to 40 bar (580 psi)
Speedup to 1,800 min⁻¹
DesignVertical, multistage, can-type (barrel)
Impeller TypesRadial / mixed flow, single/double entry
BearingsMedium-lubricated plain bearings + oil-lubricated thrust bearing
Shaft SealGland packing or tandem double mechanical seal
Flange StandardsDIN or ASME
MaterialsCast iron, carbon steel, cast steel, chrome steel, stainless steel

Higher capacities, heads, and pressures available on request.


Applications

  • Power Stations – Condensate extraction from condenser hotwell, low-pressure heater drains, booster duties

  • Industrial Plants – Condensate return, boiler feed boosting, process water transfer

  • District Heating – Condensate handling in combined heat and power (CHP) plants

  • Petrochemical & Refining – Light hydrocarbon condensate transfer (with appropriate materials)

  • General Industry – High-head clean or slightly contaminated water services


Name:
Message:
Verification code:
Submit
Comment