1# Extract Column Overhead Pumps – API 610 BB, OH & VS

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Our API 610 1# extract column overhead pumps are available in BB, OH, and VS designs, specifically engineered for the reliable transfer of high‑purity toluene product (approximately 99.8% toluene) from extract column overhead accumulators to storage or downstream processing in aromatics complexes and petrochemical plants. BB pumps provide superior rotor stability for high‑flow, high‑head main overhead product duties. OH pumps offer compact solutions for smaller transfer or booster services, while VS pumps handle low‑NPSH suction from overhead accumulators. Built with carbon steel, stainless, and alloy materials to resist aromatic corrosion. Fully API 610/ISO 13709 and NACE compliant for safe, reliable toluene product service.

Conatct For Details
DetailReview(0)Additional

Our API 610 1# extract column overhead pumps are heavy‑duty centrifugal pumps engineered specifically for the reliable transfer of high‑purity toluene product from extract column overhead accumulators to storage, treating, or further processing units in aromatics complexes and petrochemical facilities. The 1# extract column is a key unit in aromatics production that separates toluene from other aromatic components. The overhead product is a high‑purity toluene stream with a typical composition of approximately 99.8% toluene, with trace amounts of benzene (0.029%) and minimal xylenes and ethylbenzene. This high‑value toluene product serves as a key feedstock for toluene disproportionation (TDP), hydrodealkylation, solvent production, and various chemical derivatives.

The overhead toluene stream is condensed and collected in accumulators before being pumped to storage or downstream units. This fluid is characterised by moderate volatility, low viscosity, moderate vapour pressure, low NPSH availability, and often contains trace water and sulfur compounds. Pumps for this service demand excellent low Net Positive Suction Head (NPSH) performance, absolute vapour‑tight sealing to prevent fugitive emissions, and materials resistant to aromatic hydrocarbon corrosion. Manufactured in strict compliance with the latest edition of API 610 (ISO 13709), these pumps are designed for continuous, reliable, and safe operation. The API 610 standard provides three primary configurations – OH (Overhung), BB (Between Bearings), and VS (Vertically Suspended) – with selection based on flow rate, head, NPSH availability, and installation requirements.

API 610 Classifications for Extract Column Overhead Duties

  • BB – Between Bearings Pumps
    For main high‑capacity toluene transfer from extract column overhead accumulators to storage or downstream processing, BB pumps provide superior rotor rigidity and smooth, stable flow. BB1 (axially split, double‑suction) and BB2 (radially split, single‑stage) configurations are commonly specified for flows from 50 to 3,000 m³/h and heads up to 300 metres. The between‑bearings arrangement minimises shaft deflection and vibration – critical for handling volatile, low‑viscosity toluene. Double‑suction designs (BB1) balance axial thrust at high flows.

  • OH – Overhung Pumps
    For moderate‑capacity toluene transfer, booster duties, or smaller extract column overhead systems, OH pumps offer a compact and cost‑effective solution. The OH2 (horizontal, centreline‑mounted) and OH3 (vertical inline) subtypes are widely used for toluene product transfer from smaller columns, run‑down pumps, and auxiliary services. Centreline mounting accommodates thermal expansion. Their back‑pull‑out design allows easy seal and impeller maintenance without disturbing piping. Single‑stage OH pumps handle flows up to 1,500 m³/h and heads up to 180 metres.

  • VS – Vertically Suspended Pumps
    In applications where toluene is drawn from low‑NPSH overhead accumulators, sumps, or underground storage, VS pumps provide excellent suction performance. VS1 (vertical turbine) and VS6 (vertical can/barrel) types submerge the impeller below the liquid level, eliminating cavitation and priming problems. Their vertical footprint saves valuable plot space in congested plant areas.

Key Performance & Design Features

  • Pressure Capability – Designed for discharge pressures from 5 barg up to 40 barg, matching extract column overhead operating conditions.

  • Flow & Head – Capacities from 10 m³/h to 3,500 m³/h; heads typically from 50 to 350 metres.

  • Temperature Range – Engineered for toluene from ambient to 110°C (230°F), with appropriate material selection.

  • NPSH Performance – VS and specially designed BB/OH pumps with inducers achieve very low NPSH requirements (often <1.5 metres), critical for volatile toluene with moderate vapour pressure.

  • Materials – Wetted parts in carbon steel (ASTM A216 WCB), low‑temperature carbon steel, stainless steels (304, 316L, duplex), and alloy materials to resist toluene corrosion and maintain product purity. Full NACE MR0175/ISO 15156 compliance available for sour service.

  • Sealing – API 682 mechanical seals – dual (tandem or pressurised) seals are recommended for toluene service to prevent fugitive emissions and product loss. Suitable flush plans (Plan 11, 13, 32, 53A/B, 62) with cooling and quench to maintain seal integrity. Dry gas seals are also available for zero‑emission compliance.

  • Casing Design – Radially or axially split casings with heavy‑wall construction for pressure integrity; vapour‑tight connections and API 614 sealing systems to prevent leakage.

  • Bearing & Lubrication – Heavy‑duty rolling element or sleeve bearings with oil mist, forced oil, or grease; vibration and temperature monitoring for predictive maintenance.

  • Impeller Options – Closed impellers for efficient toluene handling; special hydraulics with low‑NPSH first stages to optimise suction performance.

Typical Applications

  • High‑purity toluene product transfer from 1# extract column overhead accumulators

  • Overhead product pumping from extract columns in aromatics complexes

  • Toluene transfer to storage, TDP units, or hydrodealkylation units

  • Product run‑down from extract column overhead systems to storage

  • Transfer to petrochemical solvent production units

Industries Served

  • Petrochemicals (aromatics production, toluene derivatives)

  • Oil refineries (aromatics complexes)

  • Chemical processing (solvent production)

Why Choose Our 1# Extract Column Overhead Pumps?

With extensive experience in aromatic hydrocarbon handling and full API 610 compliance, we design and manufacture 1# extract column overhead pumps that deliver exceptional safety, reliability, and efficiency. Every pump undergoes rigorous performance testing, hydrostatic tests, and comprehensive NDT inspections (radiographic, ultrasonic, dye penetrant) with complete documentation to meet the most stringent international specifications. We offer customised hydraulic designs, material selections, and seal systems to match your specific toluene composition, operating pressure, and temperature. Our engineering support includes NPSH analysis, API 684 rotor dynamics, vapour pressure evaluation, and emissions control advisory to ensure long‑term, trouble‑free operation.

Contact Us

For technical datasheets, application engineering advice, or a project‑specific quotation, please contact us at:

info@hyrig.com

Rely on our API 610 1# extract column overhead pumps to deliver reliable, safe high‑purity toluene product transfer from your extract column overhead systems.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit