12-P-160 Triplex Mud Pump
Overview:
HYRIG can supply the 12-P-160 triplex mud pump and its spare parts. The 12-P-160 is a core model in the P-Series, featuring a compact structure and light weight for high efficiency in medium-to-deep drilling.
| Parameter | Value |
|---|---|
| Height to Center of Front Inlet Suction | 16 1/2" (419 mm) |
| Height to Center of Discharge | 45 1/4" (1149 mm) |
| Overall Length over Skids | 209" (5309 mm) |
| Width over Frame | 75" (1997 mm) |
| Width over Pinion Shaft | 113" (2889 mm) |
| Height to Top of Gear Case | 75" (1905 mm) |
| Height over Fluid Cylinders | 62 19/32" (1599 mm) |
The 12-P-160 is designed for easy maintenance with its independent fluid end. When replacing the 12-P-160, ensure the liner size and gear ratio (3.439) match your rig's requirements. The pump uses MOD.7 valve pots.
This pump is commonly used in the following equipment configurations:
Need help choosing between the 10-P-130 and 12-P-160 for your depth and pressure requirements? Contact HYRIG with your drilling parameters.
Suitable for medium-to-deep well drilling operations requiring 1600 HP input power.
Disclaimer: HYRIG is an independent supplier of drilling rig spares and is not affiliated with any original equipment manufacturer. All trademarks belong to their respective owners.
Specifications:
Contact Us:
For 12-P-160 mud pump selection and replacement parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.