Overview
The HYRIG 2‑inch 5,000 PSI DEMCO‑type mud gate valve is a heavy‑duty, full‑bore manual valve engineered for severe drilling fluid circulation. Designed as a direct aftermarket replacement for OEM part numbers J001031 and M2031, it delivers identical fit, form, and function while offering significant cost savings. The valve is manufactured to API 6A and NACE MR‑01‑75 sour service standards, ensuring safe and reliable operation in hydrogen‑sulfide‑bearing environments.
Key Specifications
Valve Type: Mud Gate Valve (DEMCO configuration)
Nominal Diameter: 2 inches (50.8 mm) Full Bore
Rated Pressure: 5,000 PSI (34.5 MPa)
Temperature Class: LU (−46°C to +121°C)
Design Codes: API 6A, NACE MR‑01‑75
Operation: Manual rising stem (visual open/closed indication)
Sealing: Bidirectional soft seal, zero leakage design
End Connections: Threaded, BW butt‑weld, RTJ flange, or hammer union (optional)
OEM Cross‑Reference: J001031 / M2031
Core Material Configuration
Body: 4130 alloy steel, one‑piece forging (no casting porosity) for superior pressure integrity and erosion resistance.
Gate: 410 stainless steel with surface nitriding hardening treatment for exceptional resistance to mud abrasion and corrosion.
Stem: 410 stainless steel, rising design to prevent galling and seizing.
Seals: Standard NBR rubber; HNBR alternative available for enhanced chemical and temperature resistance.
Fasteners: B7 / L7 high‑strength alloy studs and nuts, rated for cyclic high‑pressure service.
Design & Structural Advantages
Full‑Bore Flow Path: The unobstructed full‑diameter design eliminates flow restriction and prevents accumulation of sand, cuttings, and solids – critical for high‑impurity drilling mud.
Bidirectional Soft Sealing: Ensures bubble‑tight zero leakage in both directions, even under high differential pressure, with low operating torque.
Integral Forged Construction: The monobloc forged steel shell eliminates casting defects (pinholes, shrinkage), providing outstanding shell strength and impact resistance.
Visual Rising Stem: The exposed stem gives immediate, reliable visual confirmation of valve position, enhancing rig‑site safety.
Sour Service Compliance: Full adherence to NACE MR‑01‑75 guarantees resistance to sulfide stress cracking in H₂S‑laden wells.
Standard Accessories & Repair Kits
Included Accessories: Seat assembly, stem, O‑ring seal kit, bushing, retaining ring, grease nipple, fastening studs/nuts, and handwheel assembly.
Minor Repair Kit: Contains all sealing elements and vulnerable O‑rings for routine field maintenance.
Major Overhaul Kit: Includes gate, seats, stem seals, and all internal wear parts for complete valve restoration.
Compatibility Note: All repair parts are specific to the 2" 5,000PSI version and are NOT interchangeable with 7,500PSI high‑pressure variants.
Typical Applications
Drilling mud circulation and manifold systems
Mud pump discharge and suction lines
Choke and kill manifolds
Cementing and fracturing manifolds
Wellhead flow‑control panels
Sour (H₂S) oil and gas wells
Why Choose HYRIG?
HYRIG provides premium aftermarket alternatives that match OEM quality, with full material traceability, 100% hydrostatic testing, and strict dimensional compliance with API 6A. Our valves offer immediate availability, comprehensive repair kits, and expert technical support – all at competitive prices. By choosing HYRIG, operators reduce lead times and maintenance costs while maximizing drilling uptime.
For inquiries, technical data, or pricing, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.