Overview
HYRIG provides a complete line of high‑pressure consumable wear parts specifically engineered for the 2‑inch 7,500 PSI DEMCO‑type mud gate valve, designated as the M2031‑HP series. All components in this catalog are exclusive high‑pressure upgrades with enhanced pressure ratings, higher wear resistance, and specialized materials. These parts are NOT interchangeable with any 5,000 PSI standard components – using lower‑rated parts in HP service will cause leakage, equipment failure, and serious safety hazards.
This parts list focuses on the most frequently replaced items in routine maintenance, helping operators maintain zero‑leakage performance under continuous high‑pressure loads.
Category 1 – Critical High‑Pressure Sealing Consumables (Highest Wear Rate)
HNBR High‑Pressure Seal Kit (Sole Compatible Option): M2031‑HP‑SEAL – Contains all HNBR O‑rings and gaskets rated for 7,500 PSI, high temperature, and aggressive chemicals. This is the only seal material approved for this HP valve; NBR is NOT offered. Seals are subject to accelerated aging and deformation under sustained high pressure.
High‑Pressure Seat Seal Assembly: M2031‑HP‑04 – Complete seat sealing components designed for 7,500 PSI bidirectional sealing, with reinforced elastomers and metal carriers.
Category 2 – High‑Pressure Mechanical Wear Parts (Heavy Cyclic Loading)
High‑Pressure Wear Bushing & Explosion‑Proof Retaining Ring Set: M2031‑HP‑06 – Heavy‑duty bronze bushing and retaining hardware engineered to withstand high opening/closing torque and cyclic pressure surges. Wear accelerates under HP loads.
High‑Pressure Lubrication Assembly: STD‑HP01 – Dedicated grease fitting for HP service; more robust to prevent clogging and contamination.
Category 3 – Factory‑Specified High‑Pressure Maintenance Kits
Minor Service Kit (High‑Pressure): M2031‑HP‑MINOR – Contains all seals, O‑rings, and gaskets for quick field seal replacement without major disassembly.
Major Overhaul Kit (High‑Pressure): M2031‑HP‑MAJOR – Complete set including gate, seats, stem seals, bushings, retaining rings, fasteners, and all sealing elements for a full valve restoration under HP conditions.
Recommended Replacement Intervals (High‑Pressure Continuous Service)
| Component | Standard HP Drilling Conditions | Severe H₂S / High‑Corrosion HP Service |
|---|---|---|
| Seals (HNBR O‑rings, seat seals) | 4 – 8 months | 3 – 6 months |
| Bushings & Retaining Rings | 8 – 12 months | 6 – 9 months |
| Grease Fittings | Inspect/replace at every service | Inspect/replace at every service |
Important Notes:
HP continuous loading accelerates seal aging and mechanical wear; more frequent inspections are recommended.
In severe sour (H₂S) or highly abrasive environments, all intervals should be shortened.
Always use only M2031‑HP‑specified parts; never substitute with 5000PSI components.
Quality Assurance
Every HYRIG HP consumable is manufactured from certified high‑grade materials with full traceability. HNBR seals are tested for hardness, compression set, and pressure resistance. Bushings are wear‑tested bronze alloys. All parts undergo 100% dimensional inspection to guarantee exact interchangeability with original DEMCO HP valve assemblies.
Why Choose HYRIG HP Consumable Parts?
HYRIG combines OEM‑grade quality with competitive pricing and rapid global delivery. By stocking our Minor and Major HP kits, operators reduce downtime, simplify inventory, and ensure safe, reliable operation in the most demanding high‑pressure drilling environments.
For inquiries, part numbers, or to place an order, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.