Our disc brake system for 2000HP drilling rigs is specifically engineered for deep drilling applications with a nominal depth of 7000 meters and a maximum hook load of 4500 kN. It is the ideal braking solution for drawworks on land rigs, offshore platforms, and workover rigs requiring superior stopping power under extreme conditions.
Key Configuration
Working calipers (open type): 4 pcs, each 200 kg
Maximum single-side normal pressure: 75 kN
Maximum brake clearance: 2 mm
Safety calipers (closed type): 4 pcs, each 220 kg
Maximum single-side normal pressure: 75 kN
Maximum brake clearance: 1 mm
Brake lining width: 180 mm (all calipers)
Braking Performance
Rated working braking torque: 165 kN·m
Rated parking braking torque: 120 kN·m
Rated emergency braking torque: 285 kN·m
The system provides independent working and safety circuits. The open calipers modulate speed during tripping and drilling, while the closed calipers automatically engage for parking and emergency stops – fully compliant with API and oilfield safety standards.
Why Choose This Brake System?
Direct replacement for 2000HP class drawworks (e.g., ZJ70, deep drilling rigs)
Enhanced safety with 4 closed calipers for redundant parking and emergency braking
High thermal capacity for repetitive slip and hold operations
Low maintenance – quick lining change without removing calipers
Customizable mounting brackets and hydraulic power unit available
For technical datasheets, drawings, or a quotation, please contact us:
info@hyrig.com
OEM and aftermarket support for 2000HP drilling rig disc brake systems – worldwide shipping.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.