21867-30-30-impeller-mission-magnum-10x8x14

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The HYRIG 21867-30-30 impeller is a precision-engineered replacement for Mission Magnum I 10×8×14, NOV Mission 2500 Supreme, and Halco 2500 slurry pumps. Manufactured from white cast iron (Material Code 30) with a hardness of 350–450 HB, it delivers exceptional abrasion resistance for general slurry, sand-laden water, and moderate wear applications.
Conatct For Details
DetailReview(0)Additional

HYRIG 21867-30-30 Impeller – Replacement for Mission Magnum 10×8×14 & NOV Mission 2500 Supreme

Product Overview

The HYRIG 21867-30-30 is a high-quality, interchangeable replacement impeller designed for Mission Magnum I 10×8×14 centrifugal pumps. Engineered to meet or exceed OEM specifications, this impeller delivers reliable performance in demanding slurry and dewatering applications.

This model is fully compatible with NOV Mission 2500 Supreme and Halco 2500 pumps, offering a cost-effective alternative without compromising on fit, function, or durability.


Key Specifications

ParameterDetails
Part Number21867-30-30
OEM Equivalent641221007
Compatible Pump ModelsMission Magnum I 10×8×14 (10″ suction × 8″ discharge × 14″ impeller), NOV Mission 2500 Supreme, Halco 2500
Material Code30
Material TypeHard Iron (White Cast Iron)
Hardness350–450 HB
ApplicationsGeneral slurry, sand-laden water, non-corrosive tailings, moderate wear environments, neutral to mildly alkaline conditions

Dimensions & Design

  • Outer Diameter (OD): 14.00 inches (355.6 mm)

  • Shaft Bore: 2.75 inches (69.85 mm) or 3.00 inches (76.20 mm) (varies with pump shaft)

  • Hub Inner Diameter (ID): 3.54 inches (90 mm)

  • Overall Height: 8.66 inches (220 mm)

  • Number of Vanes: 5 (open, wide-flow channel design)

  • Rotation Direction: Clockwise (CW) as viewed from the drive end

  • Installation Clearance: 0.3–0.8 mm (externally adjustable between impeller and casing)


Performance Data (at 1750 RPM)

ParameterValue
Flow Range2,600 – 4,300 US GPM (590 – 977 m³/h)
Maximum Head550 feet (167 meters)
Recommended Motor Power100–125 HP (75–90 kW)
Rated Speed1,750 RPM

The HYRIG 21867-30-30 impeller is precision-engineered to maintain identical hydraulic performance—including flow rate, head pressure, and efficiency—to the original factory part.


Compatibility & Interchange

This impeller serves as a direct replacement for:

  • Mission Magnum I 10×8×14

  • NOV Mission 2500 Supreme

  • Halco 2500 (same specification pumps)

All critical dimensions, material specifications, and performance characteristics are matched to OEM standards, ensuring seamless integration and minimal downtime.


Why Choose HYRIG?

  • Interchangeability: Meets industrial replacement standards with exact dimensional and material compliance

  • Durability: White cast iron construction offers excellent resistance to abrasive wear

  • Cost-Effective: Reliable alternative to OEM parts without sacrificing quality

  • Consistent Performance: Verified flow, head, and efficiency ratings aligned with original pump curves


Contact Information

For pricing, technical support, or to place an order, contact HYRIG:

Email: info@hyrig.com


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit