Overview
The HYRIG 4" 7500psi Demco high-pressure mud valve (M8420-HP) represents the pinnacle of the DEMCO mud valve product line – combining the largest bore (4 inches) with the highest pressure rating (7,500 PSI). This combination creates the most demanding service conditions and the highest wear rate among all DEMCO mud valve variants. Engineered for deep‑well, high‑volume, high‑pressure drilling operations, this valve features significantly upgraded components throughout – including thick‑wall body, reinforced gate, and oversized stem with visual position window. All components are EXCLUSIVE to this HP series and are NOT interchangeable with any 5,000 PSI versions.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Valve Type | High‑Pressure Mud Gate Valve (DEMCO HP Series) |
| Model | M8420-HP (Custom High‑Pressure Series) |
| Size / Bore | 4 inches (101.6 mm) – Full Bore |
| Pressure Rating | 7,500 PSI (51.7 MPa) |
| Temperature Class | LU (-46°C to +121°C) |
| Design Standard | API Spec 6A (High‑Pressure Class) |
| Sour Service | NACE MR-01-75 Compliant |
| Operation | Manual Heavy‑Duty Rising Stem with Visual Position Window |
| Sealing | HNBR Bidirectional High‑Pressure Seals (Sole Option) |
| End Connections | High‑Pressure BW Butt‑Weld, RTJ Flanged, Hammer Union |
| Body Material | 4130 Alloy Steel, Large‑Bore Heavy‑Wall Forged |
| Gate Material | 410 Stainless Steel, Thickened & Nitrided |
| Stem Material | 410 Stainless Steel, Oversized/Reinforced with Window |
| Seat Material | Stainless Steel with HNBR Elastomer |
Design & Construction Features
Large‑Bore High‑Pressure Integrated Design: Combines high‑capacity flow delivery (4" full bore) with robust pressure containment (7,500 PSI) – ideal for deep‑well high‑pressure high‑volume drilling systems.
Visual Rising Stem with Window: The oversized rising stem features an integrated observation window, providing precise, immediate visual feedback of the valve's open/closed travel position under HP conditions.
Heavy‑Wall Forged Body: Constructed from 4130 alloy steel one‑piece forging with thick‑wall, reinforced pressure‑containing structure – significantly upgraded over the 5,000 PSI version.
Advanced HP Sealing System: The HNBR bidirectional sealing system is specifically engineered for large‑bore 7,500 PSI continuous service, delivering zero‑leakage performance.
Optimized Erosion‑Resistant Flow Path: Specially designed internal geometry reduces abrasive mud impact on sealing surfaces, substantially extending service life despite the severe conditions.
Dimensional Data
| Connection Type | Height (mm) | Width (mm) |
|---|---|---|
| Butt-Weld (BW) | 660 | 350 |
| RTJ Flanged | 660 | 430 |
| Hammer Union | 660 | 360 |
RTJ Flange Details
Flange O.D.: 292 mm
Flange Bolts: 8 bolts, 7/8" diameter
Ring Number RTJ: R-27
Typical Applications
Large‑volume high‑pressure mud circulation and manifold systems
Deep‑well and ultra‑deep‑well drilling operations
High‑pressure mud pump discharge and headers
High‑pressure choke and kill manifolds
High‑pressure cementing and fracturing units
Sour (H₂S) high‑pressure oil and gas wells
Large‑bore high‑pressure abrasive slurry pipelines
Critical Compatibility Note
The M8420-HP is a dedicated high‑pressure series with no cross‑reference to standard 5,000 PSI part numbers. DO NOT attempt to use any 5,000 PSI components in this 7,500 PSI valve – this will result in catastrophic leakage, equipment failure, and serious safety hazards. This model has the highest wear rate among all four DEMCO valve variants.
For detailed technical datasheets or custom configurations, contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.