Overview
The HYRIG 4‑inch 7,500 PSI DEMCO‑type mud gate valve is a heavy‑duty, high‑pressure manual valve engineered for large‑flow drilling fluid circulation in deep and ultra‑deep wells. Designed as a direct aftermarket replacement for DEMCO‑style high‑pressure valves, it delivers OEM‑grade performance at competitive cost. Manufactured to API 6A high‑pressure standards and NACE MR‑01‑75 sour service requirements, this valve ensures reliable containment of abrasive, corrosive, and high‑pressure fluids in the most extreme oilfield environments.
Key Specifications
Valve Type: High‑Pressure Mud Gate Valve (DEMCO configuration)
Nominal Diameter: 4 inches (101.6 mm) Full Bore
Rated Pressure: 7,500 PSI (51.7 MPa)
Temperature Class: LU (−46°C to +121°C)
Design Codes: API 6A (High‑Pressure Class), NACE MR‑01‑75
Operation: Manual heavy‑duty rising stem with integrated visual position window
Sealing: Large‑bore HNBR composite bidirectional sealing system, zero leakage at high pressure
End Connections: High‑pressure BW butt‑weld, RTJ high‑pressure flange, or large‑bore high‑pressure hammer union (optional)
Core Material Configuration
Body: Large‑bore thick‑wall 4130 alloy steel forging, reinforced overall pressure‑containing structure, specifically designed for high‑flow high‑pressure service.
Gate: Extended and thickened 410 stainless steel with nitriding hardening treatment, providing exceptional resistance to erosion and high‑pressure deformation.
Stem: Oversized heavy‑duty 410 stainless steel stem, matched to the high torque and pressure loads of large‑bore valve operation.
Seals: Full HNBR high‑pressure chemical‑resistant seal set as standard, suitable for high‑temperature, high‑pressure, and severely corrosive conditions.
Fasteners: High‑strength alloy studs and nuts dedicated for high‑pressure service, anti‑vibration, anti‑rupture, and fatigue‑resistant.
Structural & Design Advantages
Large‑Bore High‑Pressure Integrated Design: Combines high‑capacity flow delivery with robust pressure containment – ideal for deep‑well high‑pressure drilling systems.
Comprehensive Component Reinforcement: All critical parts (body wall thickness, gate thickness, stem diameter) are significantly upgraded over 5,000 PSI standard models.
Visual Position Window: Allows direct, safe monitoring of valve travel under high‑pressure operation, greatly enhancing rig‑site maintenance and safety.
Optimized Erosion‑Resistant Flow Path: Specially designed internal geometry reduces abrasive mud impact on sealing surfaces, substantially extending service life.
Modular High‑Pressure Component Structure: Enables quick disassembly and reassembly, meeting the rapid maintenance demands of field operations.
Standard Accessories & Repair Kits
Included Accessories: Large‑bore high‑pressure seat assembly, thickened nitrided gate, heavy‑duty stem with visual window, HNBR full high‑pressure seal kit, wear‑resistant bushing, high‑pressure limit assembly, explosion‑proof fastening hardware set, and operating handwheel.
Minor Repair Kit (High‑Pressure): Contains all essential seals and O‑rings for routine field service.
Major Overhaul Kit (High‑Pressure): Complete set including gate, seats, stem seals, and all internal wear components for comprehensive valve restoration.
Critical Compatibility Warning: All repair parts are exclusively designed for the 4" 7,500 PSI version. They are NOT interchangeable with any components from the 4" 5,000 PSI model. Valve body, bonnet, gate, and fasteners are all custom high‑pressure specifications.
General Important Notes (Applicable to All Pressure Ratings)
Pressure Rating Compatibility – Parts for 5,000 PSI and 7,500 PSI valves must never be mixed. High‑pressure (7500) parts may be used in lower‑pressure services (downgrading is acceptable), but low‑pressure (5000) parts are strictly forbidden in high‑pressure applications. Doing so will cause leakage, equipment failure, and serious safety risks.
Sour Service Selection – All valves can be ordered in either standard or NACE‑compliant (anti‑sulfide) configuration. For H₂S‑bearing media, the NACE MR‑01‑75 option is mandatory.
Seal Material Options – Seals can be supplied in NBR or HNBR depending on temperature and chemical exposure. HNBR is recommended for high‑temperature, corrosive, or oil‑rich fluids.
Typical Applications
Large‑volume high‑pressure mud circulation and manifold systems
Deep‑well and ultra‑deep‑well drilling operations
High‑pressure mud pump discharge and headers
High‑pressure choke and kill manifolds
High‑pressure cementing and fracturing units
Sour (H₂S) high‑pressure oil and gas wells
Why Choose HYRIG?
HYRIG provides premium aftermarket alternatives that strictly match or exceed original equipment specifications. Our DEMCO‑type high‑pressure mud valves are built with full material traceability, 100% hydrostatic and high‑pressure seat leakage testing, and rigorous dimensional compliance with API 6A. We offer dedicated high‑pressure repair kits, immediate availability, and responsive technical support. By choosing HYRIG, operators achieve significant cost savings, reduced lead times, and maximum uptime in the world's most challenging high‑pressure drilling environments.
For inquiries, technical data sheets, or pricing, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.