| Model | Nominal Size | Max Flow (L/min) | Pilot Source | Max Pressure |
|---|---|---|---|---|
| 4WRZ10 | DN10 | 270 | Internal (Pilot Valve) | 35 MPa |
| 4WRH10 | DN10 | 270 | External (X port) | 35 MPa |
| 4WRZ16 Valve | DN16 | 460 | Internal (Pilot Valve) | 35 MPa |
Data source: Technical data table.
Mounting parameters for the DN10 size:
| Parameter | Specification |
|---|---|
| Mounting Interface | ISO 4401-05 (CETOP 5) |
| Bolt Pattern | 4 x M6 threaded holes (54 x 54 mm) |
| Port Connections | A, B, P, T, X, Y (O-ring sizes vary) |
| Weight | 7.4 kg (2-position) / 7.8 kg (3-position) |
The main spool is controlled by the pressure difference created by the pilot valve.
`4WRZ` or `4WRH` + `10` + `Spool Type` + `30` + `Nominal Flow` + `Pilot Oil (E/ET/T)` + `Voltage`.
Replacing an old valve? Check:
Used in heavy machinery, metallurgy, and large presses for high-flow, precise directional control.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need help choosing between WRZ and WRH, or configuring the control oil? Contact our engineers with your system schematic.
Q: What is the difference between 4WRZ and 4WRH?
A: 4WRZ has an integrated pilot solenoid valve. 4WRH relies on an external pilot pressure to move the main spool.
Q: What is the maximum flow rate for the DN10 size?
A: The DN10 size supports a maximum flow rate of 270 L/min.
Q: What pilot pressure is required for the 4WRH?
A: The 4WRH requires a pilot pressure between 0.4 to 2.5 MPa at the X port.
For 4WRZ/4WRH DN10 proportional directional valve selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.