API 610 OH2 Amine / Desulfurization Solution Circulation Pump – Heavy-Duty Overhung Process Pump for Gas Treating and Sulfur Recovery Services
The API 610 Type OH2 Amine / Desulfurization Solution Circulation Pump is an overhung, horizontal, centerline-mounted, single-stage, radially split centrifugal pump engineered specifically for continuous, reliable circulation of amine solutions (MEA, DEA, MDEA) and other desulfurization solvents in gas treating, sulfur recovery, and acid gas removal systems. Designed and manufactured to the latest API 610 (12th Edition) standards, this pump ensures maximum reliability, leak-free operation, and compliance with stringent safety and environmental requirements for handling corrosive, toxic service fluids.
Amine and desulfurization solution circulation pumps operate in critical gas treating services where fluid properties and safety requirements demand exceptional reliability and materials expertise. Common challenges include:
Corrosive nature of amines – can cause rapid degradation of standard materials, particularly at elevated temperatures.
Risk of stress corrosion cracking with amine solutions exposed to wet CO₂ and H₂S.
Toxic fluid handling – amine solutions carry absorbed H₂S, requiring absolute containment and zero leakage.
Low lubricity of amine solutions – can affect bearing and seal life.
Continuous 24/7 operation – any unplanned downtime shuts down gas treating and upstream production.
Elevated operating temperatures typical in amine regeneration and circulation systems.
Potential for foaming and entrained gases affecting pump performance and stability.
Strict environmental and safety regulations for fugitive emissions and toxic fluid containment.
The API 610 OH2 Amine / Desulfurization Solution Circulation Pump, with its corrosion-resistant metallurgy and enhanced sealing systems, is the proven solution for these demanding amine circulation applications.
1. Full Compliance with API 610 (12th Edition)
Designed, manufactured, and tested to the stringent requirements of API 610 12th Edition (ISO 13709) – the global standard for refinery and gas plant critical service pumps.
Centerline-mounted casing ensures thermal stability and maintains alignment during temperature changes common in amine systems.
Full documentation and traceability for all critical components.
2. Corrosion-Resistant Metallurgy for Amine Service
Available in stainless steel (CF8M, CF3M, CF8C), duplex stainless steel, or high-nickel alloys specifically selected for amine and desulfurization solution corrosion resistance.
Material selection based on NACE MR0175/ISO 15156 requirements for sour service where applicable.
Eliminates risk of stress corrosion cracking and generalized corrosion from amine degradation products.
Optional higher alloy materials for increased temperature or corrosion resistance.
3. Enhanced Sealing Systems for Toxic Fluid Containment
API 682 compliant seal chambers designed for cartridge-type mechanical seals.
Designed for double mechanical seal configuration with pressurized barrier fluid systems for toxic service.
Tandem seal arrangements available with leak detection and alarm provisions for maximum safety.
Rigid shaft and minimal deflection extend mechanical seal life in low-lubricity amine solutions.
Optional API 682 seal plans specifically for amine service (Plans 52, 53, 54 for double seals; Plans 11, 13, 32 for single seals).
4. Optimized Hydraulic Design for Amine Circulation
High-efficiency enclosed impeller design optimized for amine solution viscosities.
Hydraulic passage designs minimize recirculation and turbulence that can exacerbate foaming.
Smooth flow paths reduce gas breakout and foam generation.
Impeller dynamically balanced for vibration-free operation.
Stable head curve characteristics for reliable system integration.
5. Superior NPSH Performance
Optimized impeller inlet design for minimum NPSH required from amine flash drums or surge tanks.
Low NPSH characteristics ensure reliable operation with varying suction conditions.
Excellent suction-specific speed for stable performance.
6. Rigid Shaft for Minimal Deflection
Heavy-duty shaft design with deflection far below API 610 limits.
First critical speed well above operating speed range for smooth, vibration-free operation.
Minimal shaft deflection provides ideal conditions for mechanical seal reliability and long life.
7. Heavy-Duty Bearing Systems
Large-capacity oil-lubricated bearings handle radial and thrust loads.
Available lubrication options include oil ring, splash oil, purge mist, or pure oil mist.
Bearing life calculated for minimum 25,000 hours continuous operation.
Optional condition monitoring provisions for vibration and temperature.
Bearing isolators protect against contamination from environment.
8. Robust Casing Design
Casings designed for 2x API 610 nozzle loads, ensuring freedom from piping distortions.
150# or 300# flange ratings standard with higher ratings optional.
Tangential discharge nozzle for simplified piping layouts.
Jacketed casings available for heated or cooled services.
9. Foaming Tolerance
Hydraulic design specifically considers foaming tendency of amine systems.
Minimizes recirculation and turbulence that can exacerbate foaming.
Smooth flow paths reduce gas breakout and foam generation.
10. Wide Performance Range
Capacities up to 2,250 m³/h (10,000 US gpm).
Heads up to 360 meters (1,200 feet).
Pressures up to 75 bar (1,100 psi).
Multiple hydraulic coverages for optimal fit to duty.
11. Reduced Emissions Design
API 682 cartridge mechanical seals for reduced fugitive emissions.
Double mechanical seal options for zero-emission requirements in toxic service.
Compliant with stringent environmental regulations.
12. Ease of Maintenance
Back pull-out design allows rotor removal without disturbing piping or driver.
Replaceable wear rings and components for economical refurbishment.
Standardized components simplify spare parts inventory.
13. Driver Flexibility
Suitable for electric motor or steam turbine drivers.
Heavy-duty baseplates designed for 2x API 610 nozzle loads.
Optional variable frequency drive (VFD) compatibility for flow control.
Reliable Gas Treating Operation
Continuous, trouble-free circulation in critical amine and desulfurization services.
Eliminates unplanned shutdowns that halt gas treating and upstream production.
Confidence that pumps will run reliably between scheduled turnarounds.
Zero Fugitive Emissions
Double seal systems with barrier fluid ensure toxic amine solutions are safely contained.
Meets stringent environmental and safety regulations.
Protects personnel and environment from H₂S exposure.
Extended Equipment Life
Corrosion-resistant metallurgy prevents degradation from amines and desulfurization solvents.
Rigid shaft design minimizes deflection, protecting seals and bearings.
Designed for long-term service in critical gas plant applications.
Reduced Maintenance
Corrosion-resistant materials eliminate premature failure.
Minimal shaft deflection extends seal and bearing life.
Back pull-out design reduces maintenance time.
Lower maintenance costs over pump life.
Process Stability
Reliable amine circulation ensures consistent H₂S and CO₂ removal.
Stable operation under varying lean/rich amine conditions.
Minimizes foaming and entrained gas issues.
Compliance and Safety
Meets API 610, NACE, and international standards for sour gas service.
Reduced emissions design meets environmental regulations.
Safe, reliable operation in toxic service applications.
Peace of Mind
Plant management confidence in gas treating reliability.
Operations team trust in equipment performance.
Maintenance team appreciation for serviceability and corrosion resistance.
Amine Circulation Services
Lean amine circulation (MEA, DEA, MDEA)
Rich amine circulation
Semi-lean amine circulation
Amine regenerator feed
Amine booster services
Gas Treating Applications
Gas sweetening units
Sulfur recovery unit (SRU) amine service
LNG plant amine treating
Refinery fuel gas treating
Natural gas processing
Other Desulfurization Services
Hot potassium carbonate circulation (Benfield, Catacarb)
Physical solvent circulation (Selexol, Rectisol)
Caustic circulation
Carbon capture (CCS) amine circulation
Decades of proven performance in gas plants, refineries, and LNG facilities worldwide for amine circulation services.
Material expertise – proper metallurgy selection for your specific amine concentration, temperature, and H₂S/CO₂ loading.
Seal system expertise – engineered sealing solutions for toxic service containment.
Custom engineered for your specific operating conditions (flow, head, temperature, pressure, fluid properties).
Global reference list – thousands of OH2 pumps operating reliably in amine circulation service.
Lifecycle support – genuine OEM parts, service, and engineering support for the entire pump life.
More Sulzer API 610 Pumps:
API 610 BB2 Low Pressure Charge Pump – Heavy-Duty Refinery Centrifugal Pump for Low Suction Pressure Charge Services
API 610 BB2 Fractionator Bottom Pump – Heavy-Duty Refinery Centrifugal Pump for FCC & Coker Fractionator Service
API 610 BB2 Vacuum Tower Bottom Pump – Heavy-Duty Refinery Centrifugal Pump for Severe Vacuum Residue Service
API 610 BB2 Atmospheric Tower Bottom Pump – Heavy-Duty Refinery Centrifugal Pump
API 610 BB2 Power Plant Circulation Pump ZE 800-900
API 610 BB2 Water Works Pump ZE 700-800
API 610 BB2 Seawater Intake Pump ZE 600-700
API 610 BB2 Cooling Water Circulation Pump ZE 500-600
API 610 BB2 Light Oil / Product Oil Transfer Pump ZE 450-550
API 610 BB2 Boiler Feed Water Pump ZE 400-500
API 610 BB2 Power Plant Circulation Pump GSG 800-900
API 610 BB2 Water Works Pump GSG 700-800
API 610 BB2 Seawater Intake Pump GSG 600-700
API 610 BB2 Cooling Water Circulation Pump GSG 500-600
API 610 BB2 Oil Transfer Pump GSG 450-550
API 610 BB2 Boiler Feed Water Pump GSG 400-500
API 610 OH2 Low-Flow High-Head Pump OHHL 25×20×160
API 610 OH2 Fractionator Bottom / Slurry Pump OHH 100×80×315
API 610 OH2 Tower Bottom / High Temperature Process Pump OHH 80×65×250
API 610 OH2 Light Hydrocarbon / Amine Circulation Pump OHH 65×50×225
API 610 OH2 Charge / Boiler Auxiliary Pump OHH 50×40×200
API 610 BB2 Cooling Water Pump for Power Plant BBS 24×30×42
API 610 BB2 Seawater Pump Sulzer BBS 20×24×36
API 610 BB2 Fractionator Bottom / SWRO High Pressure Pump BBS 18×22×33
API 610 BB2 Vacuum Tower Bottom / Critical Service Pump BBS 16×20×31
API 610 BB2 BBS 14×18×27L Atmospheric Tower Bottom Pump
Sulzer BBS 12×16×27K API 610 BB2 General Purpose Process Pump
Sulzer BBS 12×14×24 API 610 BB2 Boiler Feed Water Boosting Pump
Sulzer BBS 10×12×22 API 610 BB2 Low Pressure Charge Pump
Sulzer ZE 500-600 Axially Split Double-Suction Cooling Pump for Metallurgy and Mining Industrial Environments
Sulzer ZE 700-800 Axially Split Double-Suction Water Works Pump for Municipal Water Supply
Sulzer ZE 600-700 Axially Split Double-Suction Seawater Pump for Intake and Desalination Plants
Sulzer ZE 450-550 Axially Split Double-Suction Oil Transfer Pump for Light Oil, Diesel, and Solvent Services
Sulzer ZE 500-600 Axially Split Double-Suction Cooling Water Pump for Refinery and Petrochemical Utility Services
Sulzer ZE 400-500 Axially Split Double-Suction Boiler Feed Pump for Demineralized Water Transfer
Sulzer ZE 800-900 Large-Flow Axially Split Double-Suction Pump for Power Plant Cooling Water Circulation
Sulzer GSG 500-600 Double-Split Centrifugal Cooling Pump for Metallurgy and Mining Industrial Environments
Sulzer GSG 700-800 Double-Split Centrifugal Water Works Pump for Municipal Water Supply
Sulzer GSG 600-700 Double-Split Centrifugal Seawater Pump for Intake and Desalination Plants
Sulzer GSG 450-550 Double-Split Centrifugal Oil Transfer Pump for Refinery Light Oil, Diesel, and Solvent Services
Sulzer GSG 500-600 Double-Split Cooling Water Pump for Refinery and Petrochemical Utility Services
Sulzer GSG 400-500 High-Efficiency Double-Split Boiler Feed Water Pump for Demineralized Water Transfer
Sulzer GSG 800-900 Large-Flow Double-Split Centrifugal Pump for Power Plant Circulation Systems
Sulzer OHH 80×65×250 Heavy-Duty API 610 OH2 Coking Service Pump with Wear-Resistant Design for Coke Slurry
Sulzer OHH 100×80×315 Heavy-Duty API 610 OH2 Wear-Resistant Transfer Pump with SUME Coating for Abrasive Oil Sands Service
Sulzer OHHL 25×20×160 Low Flow High Head API 610 Pump with Unique Impeller-Diffuser Design
Sulzer OHH 50×40×200 API 610 OH2 Boiler Auxiliary Pump for Power Plant Deaerated Water and Boiler Feed Boosting
Sulzer OHH 100×80×315 API 610 OH2 Seawater Booster Pump for Desalination and Offshore Platforms
Sulzer OHH 100×80×315 Heavy-Duty API 610 OH2 Critical Service Pump for High-Temperature, High-Pressure Circulation
Sulzer OHH 65×50×225 API 610 OH2 Amine Circulation Pump for Desulfurization Systems
Sulzer OHH 80×65×250 API 610 OH2 High Temperature Process Pump for Corrosive Chemical Fluids
Sulzer OHH 80×65×250 API 610 OH2 Gas Oil Pump for LVGO/HVGO Transfer in Vacuum Units
Sulzer OHH 65×50×225 General-Purpose API 610 OH2 Process Pump for Light Hydrocarbon and Flammable Solvent Transfer
Sulzer OHH 50×40×200 Compact High-Efficiency API 610 OH2 Charge Pump for Low-Pressure Refinery Service
Sulzer OHH 100×80×315 Heavy-Duty API 610 OH2 Large-Flow Pump for Fractionator Bottom and Slurry Service
Sulzer OHH 80×65×250 API 610 OH2 Centerline-Mounted Overhung Pump for Atmospheric/Vacuum Tower Bottom Service
Sulzer BBS 14×18×27L Heavy-Duty API 610 Coke Grinding Pump for Particle-Laden Coking Plant Services