API 610 OH2 Low-Flow High-Head Pump – Specialized Overhung Process Pump for Low Capacity, High Pressure Services
The API 610 Type OH2 Low-Flow High-Head Pump is an overhung, horizontal, centerline-mounted, single-stage, radially split centrifugal pump engineered specifically for low-capacity, high-pressure applications that fall outside the efficient operating range of conventional process pumps. Featuring specialized low-flow impeller designs including Barske or star-configuration impellers, this pump provides stable, reliable performance for the most demanding low-flow, high-head services in refineries, petrochemical plants, and industrial facilities. Designed and manufactured to the latest API 610 (12th Edition) standards, this pump ensures maximum reliability, extended service life, and compliance with global requirements.
Low-flow, high-head pumps operate in specialized applications where conventional pumps cannot provide stable, reliable performance without costly bypass systems or throttling. Common challenges include:
Extreme operating conditions at the left end of the pump curve – conventional pumps operating at low flows experience recirculation, vibration, and shaft deflection.
Instability at low flows – conventional pumps exhibit unstable head-capacity curves, rising temperatures, and increased mechanical vibrations.
High shaft deflection leading to premature seal and bearing failure.
Poor efficiency when conventional pumps are throttled to achieve required low-flow operation.
Need for costly bypass systems to keep conventional pumps away from minimum flow limits.
Continuous critical operation in applications where flow rates are inherently low but head requirements are high.
Low NPSH available in many high-head services requiring specialized suction performance.
The API 610 OH2 Low-Flow High-Head Pump, with its specialized impeller designs and stable hydraulic characteristics, is the proven solution for these demanding applications where conventional pumps cannot satisfy safety and operating requirements.
1. Full Compliance with API 610 (12th Edition)
Designed, manufactured, and tested to the stringent requirements of API 610 12th Edition (ISO 13709).
Centerline-mounted casing ensures thermal expansion remains concentric, maintaining alignment from cold start-up to full operating temperature.
Full documentation and traceability for all critical components.
2. Specialized Low-Flow Impeller Designs
Available with Barske-style impeller specifically engineered for low-flow, high-head applications.
Unique low-flow impeller-diffuser design creates stable head-capacity curves without droop or instability.
Star-configuration open impeller design for extremely low capacity operation.
Provides gap-free coverage for low-flow, high-head applications that conventional pumps cannot serve efficiently.
Eliminates need for costly bypass systems and throttling.
3. Stable Hydraulic Performance
Stable head-capacity curves achieved across entire operating range, even at minimum flows.
No unstable operation at low flows – eliminates recirculation and vibration issues common in conventional pumps.
Smooth, pulse-free flow essential for reliable system operation.
Designed for continuous operation at extremely low capacities and high head pressures.
4. Rigid Shaft for Minimal Deflection
Heavy-duty shaft design with deflection far below API 610 limits.
Very low shaft L3/D4 ratio for maximum rigidity.
First critical speed well above operating speed range for smooth, vibration-free operation.
Minimal shaft deflection provides ideal conditions for mechanical seal reliability and long life – critical in low-flow services where seal environment is challenging.
5. Heavy-Duty Bearing Systems
Robust bearings, bearing housing, and bearing isolators for maximum reliability.
Large-capacity oil-lubricated bearings handle radial and thrust loads.
Available lubrication options include oil ring, splash oil, purge mist, or pure oil mist.
Optional water cooling at bearing support for high-temperature applications.
Bearing life calculated for minimum 25,000 hours continuous operation.
6. Enhanced Mechanical Seal Environment
API 682 compliant seal chambers for cartridge-type mechanical seals.
Rigid shaft and minimal deflection extend mechanical seal life.
Accepts any mechanical seal type or assembly per API 682.
Interchangeable mechanical seals with other OH2 pumps to minimize spares inventory.
Optional seal flush plans for optimized seal performance.
7. Superior NPSH Performance
Optimized impeller inlet design for minimum NPSH required.
Low NPSH characteristics ensure reliable operation with challenging suction conditions.
Excellent suction performance suitable for low boiling point volatile and organic hydrocarbons.
Optional inducer for extremely low NPSH applications.
8. Robust Casing Design
Casings designed for 2x API 610 nozzle loads, ensuring freedom from piping distortions.
Integral case connections to avoid non-destructive testing on larger frame sizes.
Heavy-duty casing construction for high-pressure integrity.
Available with jacketed casings for special services requiring heating or cooling.
9. Wide Performance Range
Capacities from 0.3 to 60 m³/h (4 to 260 US gpm).
Heads from 20 to 450 meters (65 to 1,500 feet).
Pressures up to 51 bar (740 psi).
Temperatures from -75 to 425°C (-100 to 800°F).
Discharge sizes from 25 to 50 mm (1 to 2 inches).
Models available with even lower flows (0.3 m³/h) and higher heads as required.
10. Material Options for All Services
All API material classes available including S-4, S-5, S-6, S-8, C-6, A-8, D-1, D-2, plus bespoke options.
Metallurgy selected according to process requirements.
NACE compliant options for sour service applications.
Materials suitable for corrosive, volatile, and high-temperature services.
11. Reduced Radial Loads
Radial loads up to 85% lower than conventional pumps operating at low flows.
Extends bearing and mechanical seal life.
Reduces shaft deflection and improves reliability.
12. Reduced Emissions Design
API 682 cartridge mechanical seals for reduced fugitive emissions.
Optional magnetic coupling configurations for zero-emission requirements.
Compliant with stringent environmental regulations.
13. Ease of Maintenance
Back pull-out design allows rotor removal without disturbing piping or driver.
Quick hydraulic re-rates possible with back pull-out design.
Replaceable wear rings and components for economical refurbishment.
High interchangeability with other OH2 pump parts reduces spare parts inventory.
14. Driver Flexibility
Suitable for electric motor or steam turbine drivers.
Heavy-duty baseplates with 2x API 610 nozzle load option.
Grouted, non-grouted, or pre-grouted baseplates available.
Optional variable frequency drive (VFD) compatibility for flow control.
15. High-Temperature Alignment Options
Special alignment features for high-temperature service.
Designed for thermal expansion management up to 425°C.
Stable Low-Flow Operation
Reliable, stable performance at extremely low capacities where conventional pumps fail.
Eliminates recirculation, vibration, and instability at minimum flow conditions.
No need for costly bypass systems or throttling.
Extended Equipment Life
Specialized impeller designs minimize radial loads and shaft deflection.
Reduced mechanical vibrations extend bearing and seal life.
Higher Mean Time Between Failures (MTBF) compared to conventional pumps in low-flow service.
Operational Reliability
Continuous, trouble-free operation in critical low-flow, high-head services.
Eliminates unplanned shutdowns caused by pump instability.
Confidence that pumps will run reliably between scheduled turnarounds.
Reduced Maintenance
Minimal shaft deflection extends seal and bearing life.
Lower radial loads reduce wear on internal components.
Back pull-out design reduces maintenance time.
Lower maintenance costs over pump life.
Energy Efficiency
Better efficiency than conventional pumps operating at throttled conditions.
Eliminates energy waste from bypass recirculation.
Lower operating costs over decades of operation.
Safety and Compliance
Meets API 610 and international standards for critical service pumps.
Reduced emissions design meets environmental regulations.
Safe, reliable operation in volatile and hazardous services.
Peace of Mind
Plant management confidence in specialized low-flow system reliability.
Operations team trust in equipment performance at extreme left-end conditions.
Maintenance team appreciation for serviceability and durability.
Refinery and Petrochemical Services
Light Vacuum Gas Oil (LVGO) and Heavy Vacuum Gas Oil (HVGO) services.
Pump around services.
High head makeup services.
Light hydrocarbon boosting.
High-temperature refining applications.
Hydrocarbon transfer.
Critical Auxiliary Services
Seawater booster for critical services.
Booster applications.
Auxiliary process services.
Specialized Industrial Applications
Low boiling point volatile and organic hydrocarbons.
Chemical injection.
Sample systems.
Pilot plant operations.
High-pressure dosing.
Other Low-Flow, High-Head Applications
Any service requiring stable operation at the far left of the pump curve.
Applications where conventional pumps would require bypass systems.
Processes with inherently low flow but high pressure requirements.
Decades of proven performance in low-flow, high-head applications worldwide, with thousands of units installed globally since the 1960s.
Specialized impeller expertise – Barske, star-configuration, and impeller-diffuser designs specifically for low-flow stability.
Engineering excellence – robust design with rigid shaft and specialized hydraulics for the most challenging left-end curve applications.
Gap-free coverage – fills the low-flow gap in conventional pump ranges.
Custom engineered for your specific operating conditions (flow, head, NPSH available, fluid properties, temperature).
Global reference list – proven reliability in the most demanding low-flow services.
Lifecycle support – genuine OEM parts, service, and engineering support for the entire pump life.
More Sulzer API 610 Pumps:
API 610 BB2 Low Pressure Charge Pump – Heavy-Duty Refinery Centrifugal Pump for Low Suction Pressure Charge Services
API 610 BB2 Fractionator Bottom Pump – Heavy-Duty Refinery Centrifugal Pump for FCC & Coker Fractionator Service
API 610 BB2 Vacuum Tower Bottom Pump – Heavy-Duty Refinery Centrifugal Pump for Severe Vacuum Residue Service
API 610 BB2 Atmospheric Tower Bottom Pump – Heavy-Duty Refinery Centrifugal Pump
API 610 BB2 Power Plant Circulation Pump ZE 800-900
API 610 BB2 Water Works Pump ZE 700-800
API 610 BB2 Seawater Intake Pump ZE 600-700
API 610 BB2 Cooling Water Circulation Pump ZE 500-600
API 610 BB2 Light Oil / Product Oil Transfer Pump ZE 450-550
API 610 BB2 Boiler Feed Water Pump ZE 400-500
API 610 BB2 Power Plant Circulation Pump GSG 800-900
API 610 BB2 Water Works Pump GSG 700-800
API 610 BB2 Seawater Intake Pump GSG 600-700
API 610 BB2 Cooling Water Circulation Pump GSG 500-600
API 610 BB2 Oil Transfer Pump GSG 450-550
API 610 BB2 Boiler Feed Water Pump GSG 400-500
API 610 OH2 Low-Flow High-Head Pump OHHL 25×20×160
API 610 OH2 Fractionator Bottom / Slurry Pump OHH 100×80×315
API 610 OH2 Tower Bottom / High Temperature Process Pump OHH 80×65×250
API 610 OH2 Light Hydrocarbon / Amine Circulation Pump OHH 65×50×225
API 610 OH2 Charge / Boiler Auxiliary Pump OHH 50×40×200
API 610 BB2 Cooling Water Pump for Power Plant BBS 24×30×42
API 610 BB2 Seawater Pump Sulzer BBS 20×24×36
API 610 BB2 Fractionator Bottom / SWRO High Pressure Pump BBS 18×22×33
API 610 BB2 Vacuum Tower Bottom / Critical Service Pump BBS 16×20×31
API 610 BB2 BBS 14×18×27L Atmospheric Tower Bottom Pump
Sulzer BBS 12×16×27K API 610 BB2 General Purpose Process Pump
Sulzer BBS 12×14×24 API 610 BB2 Boiler Feed Water Boosting Pump
Sulzer BBS 10×12×22 API 610 BB2 Low Pressure Charge Pump
Sulzer ZE 500-600 Axially Split Double-Suction Cooling Pump for Metallurgy and Mining Industrial Environments
Sulzer ZE 700-800 Axially Split Double-Suction Water Works Pump for Municipal Water Supply
Sulzer ZE 600-700 Axially Split Double-Suction Seawater Pump for Intake and Desalination Plants
Sulzer ZE 450-550 Axially Split Double-Suction Oil Transfer Pump for Light Oil, Diesel, and Solvent Services
Sulzer ZE 500-600 Axially Split Double-Suction Cooling Water Pump for Refinery and Petrochemical Utility Services
Sulzer ZE 400-500 Axially Split Double-Suction Boiler Feed Pump for Demineralized Water Transfer
Sulzer ZE 800-900 Large-Flow Axially Split Double-Suction Pump for Power Plant Cooling Water Circulation
Sulzer GSG 500-600 Double-Split Centrifugal Cooling Pump for Metallurgy and Mining Industrial Environments
Sulzer GSG 700-800 Double-Split Centrifugal Water Works Pump for Municipal Water Supply
Sulzer GSG 600-700 Double-Split Centrifugal Seawater Pump for Intake and Desalination Plants
Sulzer GSG 450-550 Double-Split Centrifugal Oil Transfer Pump for Refinery Light Oil, Diesel, and Solvent Services
Sulzer GSG 500-600 Double-Split Cooling Water Pump for Refinery and Petrochemical Utility Services
Sulzer GSG 400-500 High-Efficiency Double-Split Boiler Feed Water Pump for Demineralized Water Transfer
Sulzer GSG 800-900 Large-Flow Double-Split Centrifugal Pump for Power Plant Circulation Systems
Sulzer OHH 80×65×250 Heavy-Duty API 610 OH2 Coking Service Pump with Wear-Resistant Design for Coke Slurry
Sulzer OHH 100×80×315 Heavy-Duty API 610 OH2 Wear-Resistant Transfer Pump with SUME Coating for Abrasive Oil Sands Service
Sulzer OHHL 25×20×160 Low Flow High Head API 610 Pump with Unique Impeller-Diffuser Design
Sulzer OHH 50×40×200 API 610 OH2 Boiler Auxiliary Pump for Power Plant Deaerated Water and Boiler Feed Boosting
Sulzer OHH 100×80×315 API 610 OH2 Seawater Booster Pump for Desalination and Offshore Platforms
Sulzer OHH 100×80×315 Heavy-Duty API 610 OH2 Critical Service Pump for High-Temperature, High-Pressure Circulation
Sulzer OHH 65×50×225 API 610 OH2 Amine Circulation Pump for Desulfurization Systems
Sulzer OHH 80×65×250 API 610 OH2 High Temperature Process Pump for Corrosive Chemical Fluids
Sulzer OHH 80×65×250 API 610 OH2 Gas Oil Pump for LVGO/HVGO Transfer in Vacuum Units
Sulzer OHH 65×50×225 General-Purpose API 610 OH2 Process Pump for Light Hydrocarbon and Flammable Solvent Transfer
Sulzer OHH 50×40×200 Compact High-Efficiency API 610 OH2 Charge Pump for Low-Pressure Refinery Service
Sulzer OHH 100×80×315 Heavy-Duty API 610 OH2 Large-Flow Pump for Fractionator Bottom and Slurry Service
Sulzer OHH 80×65×250 API 610 OH2 Centerline-Mounted Overhung Pump for Atmospheric/Vacuum Tower Bottom Service
Sulzer BBS 14×18×27L Heavy-Duty API 610 Coke Grinding Pump for Particle-Laden Coking Plant Services