Casing X01158003 for XBSY Sand Pump SB68

2025-10-16 14:02

Casing X01158003




Part NameCasing
Part No.X01158003
Drawing No.SB56ZJ-26.1.1
ApplicationSand Pump SB6×8
Flange StandardMetric System (DIN/ISO)
Material OptionsDuctile Iron 800/700/450 (Grade 80-55-06 / 70-50-05 / 65-45-12)
Tensile Strength (Min)800: 552 MPa / 700: 483 MPa / 450: 310 MPa
Yield Strength (Min)800: 379 MPa / 700: 345 MPa / 450: 276 MPa
Elongation (Min)800: 6% / 700: 5% / 450: 12%


Mechanical Properties of Ductile Iron 800 (Grade 80-55-06)

This table provides the typical minimum mechanical properties as per common standards like ASTM A536.

PropertyValueNotes
Grade Designation80-55-06(Min. Tensile Strength (ksi) - Min. Yield Strength (ksi) - Min. Elongation (%))
Tensile Strength, Min.80 ksi552 MPa
Yield Strength (0.2% Offset), Min.55 ksi379 MPa
Elongation, Min.6%In 2 inches (50.8 mm)
Hardness, Brinell (HBW)187 - 241Typical range
Modulus of Elasticity23 - 25 x 10⁶ psi159 - 172 GPa
Poisson's Ratio0.29 - 0.31-
Density0.254 - 0.259 lb/in³7.0 - 7.1 g/cm³

Key Material Characteristics:

  • Excellent Combination of Strength & Ductility: Offers high tensile and yield strength with good impact resistance.

  • Good Wear Resistance: Suitable for applications involving abrasion and sliding contact.

  • Machinability: Generally good machinability compared to steel of similar hardness.

This data is for reference; specific properties can vary with casting thickness and heat treatment. For critical applications, always consult the full material datasheet.


The Related products:
Sand pump
Mechanical seal for sand pump SB6*8
Mud Tank, Water Tank and Oil Tank
Flare Ignition Device
Mud Gas Separator
Mud Gun
Mud Agitator




Name:
Message:
Verification code:
Submit
Comment