The Elmagco Baylor 5032 is a heavy-duty, water-cooled electromagnetic brake engineered for the most demanding applications in the oil and gas industry, specifically as a drawworks brake on drilling rigs. Its fail-safe, spring-applied design ensures reliable braking action even in the event of a power loss, which is critical for operational safety.
This model utilizes an electromagnetic principle with multiple coils and magnets to generate exceptionally high torque for controlling heavy loads. The integrated water-cooling system is essential for managing the significant heat generated during sustained braking operations, allowing for consistent performance and extended service life in continuous high-duty cycles.
The following specification table is compiled from the parameters you provided.
| Category | Parameter | Value / Specification |
|---|---|---|
| Performance | Rated Torque | 31,500 ft-lbs @ 50 rpm |
| Number of Magnets | 2 | |
| Number of Coils | 4 | |
| Electrical | Operating Voltage | 250 VDC |
| Current | 48.45 amps | |
| Cooling System | Inlet Water Flow | 50 GPM (Gallons Per Minute) |
| Physical Dimensions & Weight | Housing Assembly Weight | 9,000 lbs |
| Housing Assembly Width | 32 inches | |
| Housing Assembly Height | 50 inches | |
| Rotor Weight | 2,533 lbs |