Gate M1926-002 – 4" 5,000 PSI DEMCO Gate Valve (Mud Valve) | Cameron DM Series Compatible

2026-02-17 17:00

Gate M1926-002 – 4" 5,000 PSI DEMCO Gate Valve (Mud Valve) | Cameron DM Series Compatible

Gate M1926-002 for 4" 5,000 PSI DEMCO Gate Valve (Mud Valve) – Genuine Replacement Gate for Cameron DM Series | Nickel-Plated Sealing Gate | Part No. M1926-002


Product Overview

This Gate M1926-002 is a precision-engineered replacement component designed specifically for 4-inch, 5,000 PSI DEMCO gate valves (mud valves) used in high-pressure drilling and oilfield applications. Fully compatible with Cameron's DEMCO Series DM gate valves—the premier gate valve in the oil and gas drilling market—this gate provides the primary sealing mechanism, sliding between seats to control fluid flow. Manufactured to meet the rigorous requirements of oilfield applications, this gate ensures reliable shut-off and long service life in the most demanding environments.


Key Specifications

  • Part Name: Gate

  • Part Number: M1926-002

  • Compatible Valve Size: 4 inches (4")

  • Pressure Rating: 5,000 PSI

  • Compatible Valve Brand: DEMCO Gate Valve (Mud Valve) / Cameron DEMCO Series DM

  • Component Type: Sliding Gate / Valve Gate

  • Material: Nickel-Plated Alloy Steel or Equivalent

  • Surface Treatment: Nickel plating for corrosion and wear resistance

  • Part of Major Repair Kit: M5305-10016


Detailed Description

The Gate M1926-002 is the heart of the 4" 5,000 PSI DEMCO mud gate valve. This precision-machined component slides vertically between two seats to either allow or block fluid flow through the valve. When fully closed, the gate provides drop-tight sealing against the seats, isolating downstream pressure and preventing fluid migration. When open, the gate retracts completely into the bonnet cavity, allowing full-bore flow with minimal pressure drop.

Manufactured from high-strength alloy steel and protected with a nickel plating, the M1926-002 gate is engineered to withstand the extreme conditions of drilling fluid service, including:

  • High-velocity abrasive particles (sand, cuttings, weighting materials)

  • Corrosive chemicals (H2S, CO2, acids, completion fluids)

  • High-pressure differentials across the sealing surfaces

  • Frequent cycling during drilling operations

The precision-ground sealing surfaces ensure intimate contact with the seats, providing reliable shut-off even after extended service. When the original gate becomes worn, scratched, or pitted, replacement with this genuine-equivalent M1926-002 component restores drop-tight sealing and extends valve service life.


Features & Benefits

Material & Coating Advantages

  • Nickel Plating: Provides exceptional corrosion resistance in harsh oilfield environments

  • Wear Resistance: Hardened surface withstands abrasion from drilling fluid solids

  • Galling Prevention: Nickel coating prevents galling between gate and seats

  • Substrate Strength: High-strength alloy steel core provides structural integrity under pressure

Design Features

  • Precision-Ground Sealing Surfaces: Ensures intimate contact with seats for drop-tight shut-off

  • Smooth Surface Finish: Minimizes friction during operation, reducing operating torque

  • Balanced Design: Engineered for even pressure distribution during sealing

  • Dimensional Accuracy: Manufactured to exact OEM specifications for perfect fit

Additional Benefits

  • OEM-Compatible: Direct replacement for original DEMCO and Cameron DM series gates

  • Quality Assurance: Individual part number M1926-002 ensures traceability and quality control

  • Restores Valve Performance: Replaces worn gate to achieve like-new sealing capability

  • Cost-Effective Repair: Allows valve rebuild without complete valve replacement


Technical Specifications

  • Material: Alloy steel (AISI 4140 or equivalent)

  • Surface Coating: Electroless nickel plating (0.0003-0.0005" thickness)

  • Hardness: Core: 28-32 HRC; Surface: Enhanced by nickel plating

  • Surface Finish: Precision-ground to 8-16 micro-inch Ra on sealing surfaces

  • Geometry: Parallel-sided or wedge configuration per DEMCO DM series design

  • Width: Precision-matched to 4" DEMCO valve body dimensions

  • Height: Engineered for full stroke operation


Compatibility Information

This Gate M1926-002 is compatible with the following valve configurations:

  • Valve Model: DEMCO Series DM Gate Valve (Mud Valve)

  • Valve Size: 4 inches (4")

  • Pressure Class: 5,000 PSI

  • Seat Compatibility: Designed specifically for Seat M2207-021

  • End Connections: Threaded, Weld, Flanged (where applicable for 4" 5000 PSI configurations)

  • Bonnet Designs: Standard bonnet, 4-bolt bonnet (J007420), 12-bolt bonnet (J017263)

This component works in conjunction with other repair kit components including:

  • Seat M2207-021 (mating sealing surface)

  • Stem M7439-002 (gate connection)

  • Stem Seal Assembly M1951-001

  • Thrust Washer M7426


Applications

The M1926-002 Gate is critical for maintaining gate valves used in:

  • Drilling standpipe and mud manifold systems

  • High-pressure mud pump discharge lines

  • Well control and choke manifolds

  • Rotary drilling rig circulation systems

  • Workover and completion operations

  • Production testing equipment

  • Geothermal drilling applications

  • High-pressure water injection systems

  • Wellheads and production manifolds

  • H2S / Sour service environments (with appropriate material certification)


Why Choose This Gate?

Cameron's DEMCO Series DM gate valves are recognized as the premier gate valve in the oil and gas drilling market, specifically engineered for the rigorous requirements of oilfield applications. The gate is the primary sealing component and experiences the most severe wear during service. Replacing a worn gate with this genuine-equivalent M1926-002 component ensures:

  • Drop-Tight Shut-Off: Restores valve's ability to seal completely when closed

  • Extended Valve Life: Prevents leakage that can erode seats and body

  • Operational Safety: Maintains well control capability essential for drilling operations

  • Reduced Operating Torque: Smooth gate surfaces minimize friction during cycling

  • Cost Efficiency: Avoids complete valve replacement through targeted component repair

  • Corrosion Protection: Nickel plating provides long-term resistance to corrosive fluids


Signs of Gate Wear

The M1926-002 gate should be inspected and replaced if you observe:

  • Visible scoring, scratching, or pitting on sealing surfaces

  • Nickel plating wear or loss exposing base metal

  • Leakage through closed valve (failed shut-off)

  • Galling or metal transfer between gate and seats

  • Reduced thickness from abrasive wear

  • Edge rounding or deformation of sealing surfaces


Installation Information

Proper installation of the Gate M1926-002 requires:

  1. Thorough Cleaning: Remove all debris from valve body and seat pockets

  2. Seat Inspection: Inspect Seat M2207-021 for wear; replace if necessary

  3. Lubrication: Lightly lubricate gate surfaces with compatible assembly grease

  4. Proper Orientation: Ensure gate is correctly oriented for connection to stem

  5. Stem Connection: Securely attach stem M7439-002 to gate

  6. Movement Test: Verify smooth gate travel through full stroke before bonnet installation

  7. Seating Check: Confirm proper alignment with seats


Related Parts

For complete valve maintenance and overhaul, the following related components are available:

ComponentPart Number
Major Repair Kit (Complete Overhaul)M5305-10016
Seat (Mating Component)M2207-021
StemM7439-002
Stem ScrewM7416
Stem Seal Assembly (with bronze bushing)M1951-001
Thrust WasherM7426
Bonnet SealM5520-439
Housing SealM5526-226
Secondary SealM5526-214

Gate & Seat Assembly

ComponentFunctionPart Number
GatePrimary sealing memberM1926-002
Seat (x2)Stationary sealing surfacesM2207-021


Name:
Message:
Verification code:
Submit
Comment