IS60 Series Inclinometer Sensor IS60-1-0-360-0505-1-0000

2025-12-30 14:51

IS60 Series Inclinometer Sensor Product Content

Product Overview
The IS60 Series Inclinometer Sensor is a high-performance sensor for measuring static tilt or inclination. It offers both single-axis and dual-axis measurement options with a wide selection of output signals and voltage ranges, making it adaptable to various industrial control and monitoring systems. Its rugged IP67-rated aluminum housing ensures reliability in harsh conditions.

Key Features

  • Single-axis (1) or Dual-axis (2) measurement capability

  • Multiple output signals: Analog Voltage (0-5V, 0-10V), 4-20mA, SSI, RS232, RS422, RS485, CANopen

  • Wide supply voltage options: 3.3-5V DC or 9-30V DC models

  • High accuracy: ±0.1° absolute accuracy

  • Wide operating temperature range: -40°C to +85°C

  • Robust construction: IP67 protection, aluminum alloy housing

  • High shock and vibration resistance (100g shock, 10g vibration)

  • Excellent long-term reliability: 10 years MTTF at 40°C

Selection Guide and Model Number Breakdown
Example Model: IS60-1-0-360-0505-1-0000

  • IS60: Product Series Inclinometer Sensor

  • 1: Measure Axis - 1 for Single Axis, 2 for Dual Axis

  • 0: Connection Type - 1 for Waterproof Joint, 2 for Shielded Cable

  • 360: Measuring Angle - Options: 360° (±180°), 180° (±90°), 120° (±60°), 60° (±30°), 30° (±15°)

  • 0505: Input Voltage/Output Signal - Defines power and output protocol (e.g., 0505 = 3.3-5V / 0-5V Analog)

  • 1: Installation & Measurement Mode - Defines mounting plane and output axis (see detailed table below)

  • 0000: Special 4-digit number for customized products

Detailed Specifications

General Mechanical Specifications

  • Range of Application: Static single-axis or static horizontal dual-axis measurement

  • Measurement Range: Single-axis: 360° (±180°); Horizontal dual-axis: 180° (±90°)

  • Resolution: 0.08°

  • Absolute Accuracy: ±0.1°

  • Mass: Approximately 210g

  • Protection Degree: IP67

  • MTTF: 10 Years @ 40°C

  • Housing Material: Aluminum Alloy

Environmental Specifications

  • Operating Temperature Range: -40°C to +85°C

  • Storage Temperature Range: -40°C to +85°C

  • Temperature Drift: 0.01° / °C

  • Vibration: 10g, 10Hz to 1.5kHz

  • Shock: 100g, 6ms (EN60068-2-27)

  • ESD Durability: Contact discharge ±8kV, Aerial discharge ±15kV

  • EMS Durability: 10V/m (80MHz-1GHz, 1KHz 80% AM)

  • EFT: Level 4 per GB/T 17626.4-2008 / IEC 61000-4-4:2004

  • Surge: Level 4 per GB/T 17626.5-2008 / IEC 61000-4-5:2004

General Electrical Specifications (Varies by Model)

  • Supply Voltage: Low voltage models (e.g., 0505): 3.3V to 5V DC; Industrial models (e.g., 2410): 15V to 30V DC

  • Output Signals: Various analog and digital outputs as per model code (Analog Voltage, 4-20mA, SSI, RS232/422/485, CANopen).

Terminal Connection Instructions
Pin configurations vary by output type. Refer to the wiring table for specific connections for Analog, SSI, RS232, RS422, RS485, and CANopen outputs. Standard wire colors include Red (VDD), Black (GND), Brown, Yellow, Green, Blue, White, and Grey for specific signal lines.

Company Information
HYRIG. Specializing in Oilfield Rig Spares Since 2007.
Contact: info@hyrig.com
Copyright: All rights reserved. Unauthorized reproduction is prohibited.


Name:
Message:
Verification code:
Submit
Comment