KSB ETA C/D – Horizontal Centrifugal Pump to DIN 24255

2026-02-12 12:51

Product Name: KSB ETA C/D – Horizontal Centrifugal Pump to DIN 24255

Product Overview:
The KSB ETA pump series, mounted on bearing brackets C and D, is a well-established horizontal centrifugal pump built in accordance with DIN 24255 standard. It extends the performance range up to 1,800 m³/h, offering a wide selection of hydraulic sizes to achieve high efficiency and low power consumption under diverse operating conditions. Available in single-stage and two-stage configurations, the ETA C/D is a versatile solution for municipal, industrial, and agricultural water applications.

Key Features & Benefits:

  • Standard-Compliant Design: Fully conforms to DIN 24255, ensuring interchangeability and reliable performance.

  • High Efficiency & Energy Savings: Optimised hydraulic grading allows precise pump selection for minimum absorbed horsepower across all duty points.

  • Flexible Configurations: Single-stage or two-stage versions (sizes 100-50/2 and 125-50/2) with overhung radial flow impellers hydraulically balanced by balance holes.

  • Robust Bearing System: Two oil-lubricated deep groove ball bearings in the bearing pedestal provide axial and radial location; grease lubrication available on request.

  • Versatile Shaft Sealing: Choice of uncooled soft-packed stuffing box (up to 110 °C), cooled soft-packed stuffing box (up to 140 °C), or uncooled mechanical seals (up to 140 °C).

  • Durable Components: Renewable casing wear rings and shaft protecting sleeves extend pump life and simplify maintenance.

  • Multiple Nozzle Orientations: Standard suction axial, discharge radial upward; tangential left upward on larger sizes; other positions available on request. Flanges to DIN 2533 (NP16) and DIN 2532 (NP10).

  • Wide Drive Options: Direct drive via electric motor, internal combustion engine, or turbine through flexible coupling.

  • Material Variety: Available in multiple material combinations including cast iron (JL 1040), bronze (GCuSn 10), carbon steel (080M40Q), stainless steel (431S29, 316 SS), and more for volute, impeller, shaft, wear rings, and shaft sleeves.

Technical Parameters:

  • Flow rate (Q): Up to 1,800 m³/h (6,600 Imp.gpm / 7,900 USgpm)

  • Head (H): According to selection chart at 1450 rpm (detailed performance curves available)

  • Sizes: Comprehensive range covering small to large capacities

  • Operating pressure: PN 16 (PN 10 for sizes ≥ DN 200)

  • Fluid temperature:

    • Uncooled stuffing box: up to 110 °C

    • Cooled stuffing box: up to 140 °C

    • Mechanical seals: up to 140 °C

  • Speed: 1450 rpm (selection chart reference), other speeds possible

  • Flange standard: DIN 2533 (NP16), from size 200: DIN 2532 (NP10)

Typical Applications:

  • Municipal water supply and distribution

  • Industrial water circulation (cooling water, hot water, oil)

  • Agricultural irrigation and pressure boosting

  • Water works and condensate systems

  • Building services and construction site dewatering

  • Loading and general transfer duties

#KSB #ETAPump #DIN24255 #CentrifugalPump #WaterSupply #Irrigation #IndustrialPump #HVACPump #CoolingWaterPump #HighEfficiency #HorizontalPump #SingleStage #TwoStage #BearingBracket


Name:
Message:
Verification code:
Submit
Comment