Product Name: KSB HPK-L – Heat Transfer Fluid / Hot Water Pump (ISO 2858 / ISO 5199)
Product Overview:
The KSB HPK-L is a horizontal, single-stage centrifugal pump specifically engineered for organic and synthetic heat transfer fluids as well as high-temperature hot water. Designed to ISO 2858 dimensions and ISO 5199 technical requirements, it ensures global interchangeability and maximum reliability. Featuring the patented KSB VenJet® automatic venting chamber, the HPK-L protects the mechanical seal from dry running, while air-cooled bearing brackets with thermal barrier eliminate the need for external cooling. With fluid temperature capability up to +400 °C and operating pressure up to 40 bar, the HPK-L is the premium choice for industrial heating, district heating, and forced circulation boiler systems.
Key Features & Benefits:
Reliable Operation – Patented VenJet® Technology
VenJet® venting chamber continuously removes air from the rotating parts during operation.
Prevents mechanical seal dry running – eliminates a major cause of seal failure.
Ensures stable operation even with gas-entrained heat transfer fluids.
Energy-Efficient & No External Cooling Required
Improved hydraulic flow passages – high efficiency levels across the operating range.
Pump characteristic adjusted to duty point as standard – impeller trimming available.
Additional ISO selection chart sizes – enables selection close to best efficiency point (BEP).
Air-cooled bearing bracket with integrated heat barrier and fan impeller – no external cooling water or power required.
Long Operating Life – Robust Bearing & Shaft System
Two grease-lubricated angular contact ball bearings in back-to-back arrangement – designed for ≥ 25,000 operating hours.
Product-lubricated SiC/SiC plain bearing – excellent dry-running resistance and wear properties.
Rigid shaft design with low deflection – extends mechanical seal and bearing life.
Universal Use – Material Variants for Every Application
Material combinations tailored to fluid type, temperature, and pressure.
Available in multiple configurations: S, E, Z, Y variants.
Casing, impeller, casing wear rings, and mechanical seals (single or double) available in ductile iron, cast steel, stainless steel, and high-temperature alloys.
Suitable for both synthetic and mineral heat transfer oils as well as pressurised hot water.
Standard-Compliant & Interchangeable
Dimensions to ISO 2858, technical requirements to ISO 5199.
Flange drilling to EN 1092-1 (other standards on request).
Back pull-out design – rotating assembly removable without disturbing piping or motor.
Technical Parameters:
| Parameter | 50 Hz / 60 Hz Value |
|---|---|
| Flow rate (Q) | ≤ 1,160 m³/h |
| Head (H) | ≤ 162 m |
| Fluid temperature – Variant S / Z | –40 °C to +350 °C |
| Fluid temperature – Variant E / Y | –40 °C to +400 °C |
| Operating pressure – Variant E / S | ≤ 25 bar |
| Operating pressure – Variant Y / Z | ≤ 40 bar |
| Speed | 1,450 / 1,750 rpm (selection charts available) |
| Design | Horizontal, single-stage, radial impeller, volute casing |
| Bearings | Grease-lubricated angular contact ball bearings + SiC/SiC product-lubricated plain bearing |
| Venting | Patented VenJet® automatic venting chamber |
| Cooling | Air-cooled bearing bracket (no external cooling required) |
Materials of Construction (Variant Overview):
| Component | S Variant | E Variant | Z Variant | Y Variant |
|---|---|---|---|---|
| Volute casing | GP240GH+N | 1.7706 | – | – |
| Casing cover | EN-GJS-400-18-LT | P250GH / P3535NL | EN-P3535NL | – |
| Impeller | EN-GJL-250 / 1.4408 | EN-GJL-250 / 1.4408 | EN-GJL-250 / 1.4408 | EN-GJL-250 / 1.4408 |
| Shaft | 1.4021 + QT800 | 1.4021 + QT800 | 1.4021 + QT800 | 1.4021 + QT800 |
| Bearing bracket | EN-GJS-400-18-LT | EN-GJS-400-18-LT | EN-GJS-400-18-LT | EN-GJS-400-18-LT |
| Plain bearing | SiC/SiC | SiC/SiC | SiC/SiC | SiC/SiC |
Additional special materials available on request.
Typical Applications:
Heat transfer systems – synthetic and mineral thermal oil circuits
Forced circulation boilers – high-temperature hot water generation
District heating networks – primary and secondary circulation
Industrial heating plants – chemical, pharmaceutical, petrochemical
Hot water systems – pressurised hot water up to 400 °C
Solar thermal power plants – heat transfer fluid circulation
Biomass and waste-to-energy plants – thermal oil circuits
Why Choose KSB HPK-L?
The HPK-L is KSB‘s dedicated high-temperature pump for heat transfer fluids. Unlike standard water pumps adapted for hot service, the HPK-L is engineered from the ground up for 350 °C / 400 °C continuous operation with no external cooling. The VenJet® venting system is a game-changer for thermal fluid systems – it automatically removes vapour and air, protecting the seal and ensuring stable hydraulic performance throughout the pump‘s life. With ISO 2858 interchangeability, 25,000-hour bearings, and material variants for every duty, the HPK-L delivers lowest lifecycle cost in the most demanding high-temperature applications.
#KSB #HPKL #HeatTransferFluid #ThermalOilPump #HotWaterPump #HighTemperaturePump #ISO2858 #ISO5199 #VenJet #NoExternalCooling #DistrictHeating #IndustrialHeating #ForcedCirculation #SiC #ThermalFluid #EnergyEfficient