The KSB RDLO is a single-stage, double-entry, axially split volute casing pump engineered for very high flow, medium to high head water transport in the most demanding municipal, industrial, and power generation applications. Designed as the larger capacity complement to the KSB Omega series, the RDLO features a double-volute casing, rigid shaft, and solid bearing brackets bolted directly to the upper casing half – delivering exceptionally low vibration, minimum 100,000 hours L10 bearing life, and sustained hydraulic efficiency. With flow rates up to 18,000 m³/h and heads up to 300 m, the RDLO is the preferred choice for waterworks, desalination, cooling water circulation, district energy, and fire-fighting systems worldwide.
Double-Volute Casing Design – Fully balances radial forces; ensures low vibration levels across entire operating range; minimises loads on rolling element bearings; enables compact, energy-efficient design.
Extended Bearing Life – All bearing sizes achieve theoretical L10 life of at least 100,000 hours; solid bearing brackets additionally bolted to upper casing half maximise rigidity.
Short, Rigid Shaft – Minimises deflection; prolongs life of bearings, mechanical seals, and coupling; spring-loaded rotor requires no field adjustments.
Service-Friendly Axially Split Design – Self-centring upper casing half enables precise, tool-free assembly; hexagon head bolts are completely removed for maintenance; inside of pump is freely accessible for easy cleaning and inspection.
Superior Casing Sealing – Solid casing split flange on upper and lower halves with minimum 80 mm thickness ensures reliable, trouble-free sealing under all operating conditions.
Corrosion & Abrasion Resistant Materials – Shaft protecting sleeves, casing wear rings, impeller wear rings available in bronze, stainless steel, duplex steel; maximises service life in aggressive water services.
Wide Material Selection – Volute casing in grey cast iron, nodular cast iron, or duplex steel; impeller in bronze, stainless steel, duplex steel; shaft in stainless steel or duplex steel; shaft protecting sleeves and wear rings in bronze, stainless steel, duplex steel; other materials available on request.
Extended Hydraulic Range – Larger flow rates and higher heads available on request; standard design up to +140 °C (+284 °F).
| Parameter | Value |
|---|---|
| Size (DN) | 350 – 900 mm (14 – 35 in) |
| Flow Rate (Q) ¹ | ≤ 18,000 m³/h (≤ 79,260 US gpm) |
| Head (H) ¹,² | ≤ 300 m (≤ 984 ft) |
| Operating Pressure (p) ² | ≤ 30 bar (≤ 435 psi) |
| Fluid Temperature (T) ³ | 0 °C to +140 °C (32 °F to 284 °F) |
| Design Standard | Axially split, single-stage, double-entry volute casing |
¹ Larger flow rates and higher heads available on request.
² Depending on material and size.
³ Standard design up to 80 °C (176 °F); higher temperatures available on request.
Waterworks & Desalination Plants – Raw water intake, product water transfer, SWRO feed, brine discharge
Pressure Boosting & Bulk Water Transport – Municipal and industrial water supply mains, transmission lines
Power Stations – Service water, condenser cooling water, auxiliary cooling systems
Irrigation & Drainage Pumping Stations – Large-scale agricultural water distribution, flood control, land drainage
Fire-Fighting Systems – Fixed deluge, sprinkler, hydrant, and raw water fire pumps
Shipbuilding – Ballast, bilge, cooling water, fire-fighting, general service pumps
District Heating & District Cooling Systems – Hot water and chilled water primary circulation
General Industry – Process water, cooling circuits, utility water supply, raw water intake