KSB RWCP / RWCN – Vertical Centrifugal Sump Pump for Industrial Fluids

2026-02-13 20:00

KSB RWCP / RWCN – Vertical Centrifugal Sump Pump for Industrial Fluids

Product Overview

The KSB RWCP and RWCN are vertical centrifugal sump pumps engineered for reliable handling of a wide variety of industrial fluids under diverse pressure and temperature conditions. Available in two configurations – RWCP with discharge pipe and RWCN without discharge pipe – these pumps offer easy maintenance, process-oriented design, and a choice of impeller types (free-flow, channel, or semi-open) to match specific fluid characteristics. With flow rates up to 700 m³/h (50 Hz) / 890 m³/h (60 Hz) , operating pressure up to 16 bar, and immersion depths up to 5,785 mm, the RWCP/RWCN series is the ideal solution for industrial sump drainage, process water transfer, and wastewater handling.


Key Features & Benefits

  • Easy Maintenance – Impeller can be removed without disturbing piping or motor; simplifies inspection and replacement.

  • Versatile Application – Suitable for various fluids under diverse pressure and temperature conditions; available with free-flow, channel, or semi-open impellers to handle clean, solids-bearing, or fibrous media.

  • Process-Oriented Design – Pump hydraulics tailored to specific process requirements; grease-lubricated bearings above the sump; medium-lubricated bearings within the pump for reliable operation.

  • Two Configurations:

    • RWCP: With discharge pipe – for applications requiring a rigid discharge column.

    • RWCN: Without discharge pipe – for simplified installation where flexible discharge is acceptable.

  • Flexible Installation – Available with rectangular baseplate (standard) or circular baseplate (optional) to suit different pit or tank configurations.

  • Wide Material Selection:

    • Pump casing: GG25 (grey cast iron) or CF8M (stainless steel)

    • Impeller: GG25, CF8M, or CA6NM (13% chrome steel)

    • Shaft: F114 carbon steel or AISI 316L stainless steel

    • Column: ST37 carbon steel or AISI 316L

    • Bearings: TFM (filled PTFE) for low friction and wear resistance


Technical Specifications

Parameter50 Hz60 Hz
Size (DN)50 – 200 mm (2 – 8 in)50 – 200 mm
Flow Rate (Q)up to 700 m³/hup to 890 m³/h

up to 3,082 US gpmup to 3,920 US gpm
Max. Operating Pressure16 bar (232 psi)16 bar
Fluid Temperature-10 °C to +100 °C-10 °C to +100 °C
Max. Immersion Depth5,785 mm (19 ft)5,785 mm
Pump TypeVertical centrifugal sump pump
Impeller TypesFree-flow, channel, semi-open
BearingsGrease-lubricated (above sump) + medium-lubricated (in pump)
MaterialsGG25, CF8M, CA6NM, AISI 316L, ST37, TFM

Higher ratings available on request.


Applications

  • Industrial Sump Drainage – Pumping of process water, wastewater, and effluents from pits and tanks

  • Process Water Transfer – Circulation and boosting of clean or slightly contaminated industrial fluids

  • Wastewater Handling – Solids-bearing liquids (with appropriate impeller selection)

  • Cooling Water Circuits – Return and transfer duties in industrial cooling systems

  • Chemical & Petrochemical – Corrosive fluids (with stainless steel materials)

  • General Industry – Any vertical sump pumping application requiring reliable, low-maintenance operation


Name:
Message:
Verification code:
Submit
Comment