The KSB UPA submersible borehole pump installed in a pressure shroud offers a unique dry-installed alternative to conventional dry-mounted pumps. The pump operates within a pre-filled pressure shroud, eliminating the need for dynamic seals, bearings, and alignment – resulting in a completely maintenance-free solution. With hydrodynamic bearings, no mechanical seal, and no leakage over the entire life cycle, this configuration combines the reliability of a submersible pump with the convenience of dry installation. Available for horizontal or vertical mounting, with adjustable nozzle positions, and in-line piping integration, the UPA in a pressure shroud is ideal for water supply, pressure boosting, and industrial applications where low maintenance, high reliability, and efficiency are paramount.
Completely Maintenance-Free – Hydrodynamic bearings require no grease or oil; no dynamic sealing to atmosphere eliminates mechanical seal maintenance and guarantees zero leakage over the entire life cycle; no alignment required.
High Operating Reliability & Long Service Life – Solid cast design for maximum operating times; lift check valve with anti-blockage valve disc closes quickly to reduce waterhammer; wear-resistant variant available for heavily sand-laden fluids; insensitive to moisture and fluctuating temperatures.
Excellent Efficiency – Optimised hydraulic design delivers highest efficiencies and lowest energy demand. Can be combined with UMA‑S high‑efficiency permanent magnet synchronous motor (up to 250 kW) for up to 12% higher electric efficiency; overall efficiencies comparable with conventional dry-installed pumps.
Low Noise – Virtually no noise emission when surrounded by the fluid handled during operation.
Flood-Proof – Pump set operates in a pre-filled pressure shroud, fully protected from external flooding.
Flexible Installation – Horizontal or vertical mounting with adjustable nozzle positions; can be installed in-line directly in the piping; low moment of inertia – no special foundation required.
Drinking Water Certified – Certified to ACS and compliant with UBA (German Environment Agency) for potable water applications.
| Parameter | Value |
|---|---|
| Pressure Shroud Diameter | DN 120 to DN 500 (standard) |
| Pressure Class, Suction Side | PN10 / PN16 |
| Pressure Class, Discharge Side | Up to PN 63 (depending on pump pressure) |
| Max. Fluid Temperature | 50 °C (122 °F) |
| Stage Casing Materials | Grey cast iron / 1.4408 / 1.4517 (stainless steel / duplex) |
| Pump Type | Submersible borehole pump in pressure shroud |
| Installation | Horizontal or vertical, in-line option |
| Bearings | Hydrodynamic (maintenance-free) |
| Sealing | No dynamic seal to atmosphere; zero leakage |
| Motor Option | UMA‑S high‑efficiency permanent magnet synchronous motor (up to 250 kW) |
| Certifications | ACS (drinking water), UBA compliant |
Municipal Water Supply – Dry-installed booster stations, pressure boosting
Industrial Water Systems – Cooling water, process water, service water
Irrigation Schemes – Large-scale agricultural water supply
Fire Protection Systems – Reliable, maintenance-free fire water pumps
Drinking Water Networks – In-line boosting with potable water certification
Flood-Prone Areas – Submersible reliability with dry installation convenience